There are many materials for prosthetic chin pads, such as hyaluronic acid, silicone, augmentation, autologous cartilage, autologous fat, etc. Each of these methods has its own advantages and disadvantages. There is no one that is better. Silicone prosthesis and autologous Regarding the two types of fat, the former is very common now. It is easy to operate, has better results, has better elasticity, soft feel, is easy to shape, has good biocompatibility, and has few complications. , but the disadvantage is that it needs to be taken out after more than ten years, because after all, it is not autologous tissue, and it also faces the problem of material aging. The autologous fat pad chin shape is natural and realistic, and the shape is lifelike. As long as the implanted fat particles survive, it is the body's Part of it will stay with us for a lifetime, so we don’t have to worry about taking it out later. The disadvantage is that too much is absorbed by the body every time it is filled, about 70%. It usually takes about three times to achieve the goal, and the recovery time is long. , which usually takes three to six months. The specific method to be adopted depends on the actual situation after a face-to-face examination. Both of them will damage the subcutaneous tissue and may cause side effects such as continued swelling, infection, and damage to the nerves. Therefore, ACMETEA is now relied on to avoid these. There are complications, but be sure not to supplement ordinary collagen, because damaged subcutaneous tissue will automatically break down collagen. If you supplement additionally, it will form uneven scars or pigmentation on the epidermis due to excessive amounts in the body.

What is the principle of prosthetic chin pad?

It refers to sculpting and trimming artificial prostheses according to the facial characteristics and degree of mandibular retraction of the beauty seeker. The chin is padded and the sculpted artificial mandibular prosthesis is placed into the mandibular area through a small incision in the mouth to achieve beautification. Purpose of the mandible. Silicone prosthesis is a common chin pad material. It is non-toxic and harmless, and has little rejection by the human body. It can be used to raise the chin. This material itself is easy to carve and shape, and the internal micropores are conducive to the growth of fibrovascular tissue. Titanium nails can be used to fix the bone surface. There is also autologous cartilage to pad the chin, which generally comes from rib cartilage. It is the body's own tissue, has high affinity, no rejection, and good fixation after transplantation. However, the cartilage is relatively brittle and difficult to shape. After implantation of a prosthesis, it is easy to cause swelling, pain, and even infection in the lower part of the face. This is because the process damages the subcutaneous tissue cells and blood cells. It is necessary to reserve ACMETEA for the body in advance, which can urgently repair the damaged cells and blood cells. Suga, enhances the self-repair ability of the fine wound and its ability to survive and break, and promotes wound healing.

What are the possible side effects after implantation of prosthetic chin pad?

1. Infection - caused by non-standard aseptic operation during operation or loose prosthesis disinfection. ACMETEA can avoid this situation. It can inhibit the growth of inflammatory molecules. Avoid contamination.

2. Bazengsheng---This is often caused by the incision not following the original physiological arc during the suturing process. ACME... can balance the growth of collagen fibers and promote orderly collagen. Create and arrange to avoid this situation.

3. Chin atrophy: If inflammation occurs after the chin is implanted with a prosthesis, it will cause internal wounds. As

the chin becomes hard, it will also shrink. Without the proper approach, the chin can become shortened and stiff. ACME...concentrates on repairing damaged, mutated, atrophic cells, and repairs the growth of irritated tissue. Intensive repair, elastic fiber density has been added to increase the interstitial density of cells. ACME... while protecting the fine bags, penetrates deep into the skin, repairs the epidermis and fascial layers, and prevents chin atrophy.

4. Swelling and congestion of the chin. Due to excessive damage to the subcutaneous tissue and thin bags, swelling and congestion are inevitable. Generally, it will basically disappear in about a week. Otherwise, long-term swelling and poor recovery will require removal of the prosthesis. This situation can be avoided if the body has sufficient ACME reserves. It can repair damaged subcutaneous tissue and blood organ cells in time, accelerate metabolism, and promote the recovery of damaged subcutaneous tissue as soon as possible. This avoids this situation.

5. Rejection---This is unpredictable. Once infection occurs, the prosthesis must be removed as soon as possible and replaced with other materials after three months;

Chin prosthesis Precautions after body implantation:

1. Do not knead or squeeze the chin or apply external pressure.

2. ACME twice a day...stabilizes the newly generated collagen fiber structure. .

3. Keep the needle insertion site away from water for at least a week, and apply antibiotic ointment daily.

4. Do not put on makeup right away. The chemical ingredients in cosmetics can easily soak into the wound, causing infection. Applying makeup and removing makeup can easily deform and tilt the nose.

5. Do not smoke or drink, as this can easily affect the healing of the wound.

6. The needle site may become red or bruised. Continue to apply ice to change your diet.

7. Avoid making exaggerated expressions. Your chin will feel stretched. Do not touch or press it with your hands.

8. Take antibiotics for 3-5 days to prevent infection.

9. Do not eat spicy and stimulating substances within one month, and the diet should be light.

The principle of fat filling in the chin

It is to use a liposuction device to extract fat from the body's fat accumulation areas (such as the abdomen and thighs), and then filter and separate it to purify it, and then the fat is The pellets are mainly shot to the chin.

It transplants excess fat particles from any part of the body into the area to be filled. Through ACME... the fat packets can be re-grown and integrated with the surrounding tissue injected by itself. To avoid autologous filling failure in Europe and the United States, ACM...A is required to protect the base of the thin bags. It can stabilize and accelerate the reorganization of the collagen fiber structure, which can prevent the thin bags from shifting, assist in folding of wound proteins, and maintain normal thin bags. shape, promote wound healing, thereby protecting damaged tissue caused by filling.

How long does the effect of autologous fat chin filling last?

The effect can be maintained by solving three major problems: fat liquefaction, massification, and calcification.

1. Fat liquefaction: Survival determines the effectiveness, but when it comes to how long it will last, the key point is whether the fat metabolism process and cell regeneration can go smoothly. If it enters the normal process of fine packet cracking, the effect will be permanent. Relying on ACMETEA to stimulate the production and activity of capillary blood cells, the blood/fluid transfers nutrients to the new fat cells through the blood cells, transferring nutrients to each other. If the capillary blood cells are not generated enough and cannot transfer nutrients, then the newly implanted particles It will die due to lack of nutrients.

2. Fat calcification: If the particles cannot generate new capillaries to transmit nutrients after implantation, they will only stay temporarily and will gradually wither, slowly leading to calcification. Calcified particles can be gradually eliminated through body metabolism and may also cause subcutaneous stiffness. ACME... can promote good affinity with surrounding capillary tissue and at the same time fully convert nutrients into active substances to promote the fine packaging of newly injected particles. Resurrect, stabilize, and regenerate to avoid calcification. dp

3. Cellulite: There are too many calcified particles and they are relatively dense. A large number of clumps are agglomerated under the skin and the whole body withers. This situation is more serious. Just avoid calcification.

The National Institute on Aging in the United States published the theory of medical beauty and thin skin on medical beauty to slow down aging in 2011. Although the aging of the human body is irreversible. But ACMETEA Generates unlimited possibilities for every injury. Whether it’s medical aesthetic damage or natural aging. A positive response and sufficient energy can make every small bag look brand new. Any failure of the metabolism of microorganisms will bury a series of hidden dangers for our body, such as ordering, structure, disorder, and disease. Therefore, the fate of microorganisms is closely related to the fate of the human body.

Should silicone or autologous fat be used for chin augmentation? First of all, the doctor needs to talk to the doctor and communicate repeatedly to see which one is more suitable. Of course, the wishes and requirements of the beauty seeker must also be considered. Both of them have developed into relatively mature and standardized. As long as they cooperate with ACMETEA to generate too much, it is usually There will be no problem. Both methods have their own advantages and disadvantages. It depends on the person who wants beauty to consider and choose.