Product introduction
As long as it is a car, there will always be some tiny scratches after walking for a period of time, which makes people pity and hate. When your car has a slight scratch, don't worry now. Cai Yi Auto Paint Repair Pen can solve your troubles! Carrying Cai Yi's coloring pen with you can quickly and effectively repair the tiny scratches on the car paint. It is very convenient to use, suitable for all kinds of paint surfaces, and almost no traces can be seen after use. Just choose the appropriate model according to the color of the car paint, and apply this product on the tiny scratches or paint drops to repair, cover up and fill the scars, which has the function of rust prevention. This product adopts imported raw materials and is prepared according to the original car color number. There are now more than 400 kinds of car color touch-up pens to choose from.
Application mode
Tiny scratches and corrosion can be repaired by more than 90% with Cai Yi paint repair pen. Instructions for use (the following processing steps are for reference only, and are applicable to cases where the repair area is not very large):
1, Cleaning: Wash the scratches with soapy water or other supplies and dry them.
2. Shake well: shake the product well before use (shake it up and down for about 40-50 times).
3. Painting: First, select the parts with scratches (scratches), fill them with a pen, and smear them repeatedly every 5 minutes until they are higher than the original painting plane.
4. Sandpaper: After the painted part is dried for 2-3 days, soak 2000 #/3000 # sandpaper in soapy water for 20-30 minutes to soften it.
5. Water milling: After the paint is dried, water milling can be carried out. Use pre-soaked sandpaper to polish in the same direction until the original car is painted.
6. Confirm the grinding position: Observe the grinding position with naked eyes. * Remember not to use too much force to avoid damaging the original paint.
7. Polishing: Use polishing wax to wipe the cloth and polish it into a circle.
8. Final confirmation: If the surface of the car paint is uneven after polishing, better results can be obtained by re-operation.
9. Waxing: Apply polishing wax to dry cloth. Apply wax polish clockwise. After the wax dries for about one minute, dry it clockwise with a towel or cloth.
Matters needing attention
● Thoroughly clean the surface to be repaired before repairing;
● Humidity, oil stain and rust stain are the main reasons for the failure of repair. Please clean and dry the scratches carefully; For vehicles waxed or painted recently, it is suggested that the wax film to be repaired can be removed with alcohol to increase the adhesion of the paint film.
● For the uneven scar on the bumper, you can first polish it with sandpaper or repair it with a knife, and the repair effect is better.
● Paint precipitation will affect the use. Before repairing, fully shake the touch-up pen, and shake it for more than 30 times when you hear the impact of marbles.
● Open the pen cover with a vertical touch-up pen. Never open it in a horizontal and vertical state to avoid paint spillage.
● For deep wounds, you can apply it repeatedly with the attached brush several times (2-3 minutes apart).
● It will be a bit bumpy to directly use the touch-up strokes. After the paint film dries in 2-3 days, it will be polished with 2000# water sand, and the effect will be better.
● Sprinkling irrigation combination is a professional painting process repair. After repair, the surface is smooth and does not need to be polished with sandpaper. 400# and 800# sandpaper attached to sprinkler irrigation are used for pretreatment of scars before repair.