Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and beauty - Method for fil aluminum skin in refrigerator
Method for fil aluminum skin in refrigerator
Refrigerator is a kind of equipment for storing low-temperature items such as food and medicine. In the manufacturing process, attention should be paid to heat preservation, sealing and other issues to ensure the refrigeration effect. The insulation material of freezers is generally polyurethane or polystyrene board, and aluminum skin is a common decorative material for freezers. Here's how to pack aluminum skin in the freezer.

1. Cleaning the surface of the freezer: clean the surface of the freezer before installing the aluminum skin. Cleaning agent and water can be used in the cleaning process, and the surface moisture can be dried with a dry cloth.

2. Reduce the size of the freezer: calculate and mark the laying size of the aluminum sheet inside the freezer, because the aluminum sheet is assembled and shaped on the surface, so that the aluminum sheet can be more firmly attached to the freezer wall.

3. Cut aluminum skin: cut aluminum skin into corresponding shapes according to the dimensions marked in the previous step, and leave a margin. Pay attention to the cutting strength when cutting to avoid damaging the aluminum skin.

4. Sticking aluminum skin: Place the prepared aluminum skin flat on the inside of the freezer, and gently flatten the surface of the aluminum skin by hand to make it closely adhere to the surface of the freezer. In this step, you can clamp the aluminum skin with a board to make it firmly stick to the wall of the freezer.

5. Poke the aluminum skin: when the aluminum skin is close to the surface of the freezer, poke several small holes with sharp tools to make the cold energy flow freely, thus ensuring the refrigeration effect.

6. Paste the aluminum skin directly: If you don't want to poke holes, you can apply some glue that is not easy to dry on the aluminum skin, and then paste the aluminum skin directly on the freezer wall. This method should pay attention to the construction technology and the smoothness of pasting, so as to avoid wrinkles or uneven surface.

In a word, the installation of aluminum skin is an essential part of the beautification of freezer. Exquisite aluminum skin can improve the appearance quality of freezer, and reasonable installation method can also protect the insulation layer of freezer reasonably. However, it should be noted that safety must be paid attention to during installation to avoid unnecessary injuries.