Saw processing: It can be easily processed using wood product processing machinery and boards. Our company recommends the use of carbide blades.

Shear processing and groove processing: It is important to maintain a V-shaped groove processing of 0.2-0.4mm from the base surface. The optimal groove angle recommended by our company is 110 degrees.

Use the modified drill bit as shown in the picture. Number of teeth: 2-4 Number of revolutions: 20,000-30,000rpm Number of revolutions: 2-5m/min Material: Carbide

By operating on the platform, the curved portion can be made neatly.

It is appropriate to use circular saws and band saws when processing V-shaped grooves in large quantities. The illustration shows an example of a groove cutter.

Material: Carbide sheet Outer diameter: 305mm Number of teeth: 24 Number of revolutions: 30,000-50,000rpm Number of feed revolutions: 5m/min

When using a plate analyzer to shape the plate, an upper die with an appropriate radius should be used