The maximum cutting thickness of Haibao plasma power supply is 50(mm).

It is recommended to machine a punch 38 with a thickness of 25mm.

Three-phase 50Hz voltage 400 plasma source

HyPertormance plasma HT2000 is a high-speed and long-life oxygen plasma power supply for American Haibao Company.

200 Amp oxygen plasma has faster cutting speed and lower operating cost.

Production cutting capacity (perforation)-low carbon steel 25mm

Maximum perforation capacity-low carbon steel 38mm

Maximum cutting capacity (edge arc)-low carbon steel 50 mm

abstract

Dual-gas HySpeed high-speed HT2000 and HySpeed high-speed HT2000LHF have built-in high frequency, and are operated by common wearing parts, so as to achieve the best cutting effect in the widest range of material types and thicknesses.

HySpeed high-speed HT2000 and HySpeed high-speed HT2000LHF high-speed HT2000LHF oxygen plasma cutting system now adopts Haibao patent coaxial assistance? Coaxial spraying technology can improve the cutting speed, which is 50% faster than ordinary products.

standard

cutting ability

Low carbon steel slag-free 25mm

Production (perforation) 38 mm

Cut (edge arc) 50 mm.

Stainless steel products (perforated) 25mm

Cut (edge arc) 50 mm.

Aluminum products (perforated) 25mm

Cut (edge arc) 50 mm.

The optimum cutting speed and cutting quality are12 mm.

(Low carbon steel) 3050 mm/m

Cutting angle ISO 90 13 range 4-5.

Weldability can be directly welded.

The cutting material determines the oxygen/air and oxygen/oxygen of low carbon steel.

Processing gases air/air, nitrogen/carbon dioxide

(plasma gas/shielding gas) stainless steel air/air, nitrogen/air,

Nitrogen/carbon dioxide, H35/ nitrogen

Aluminum air/air, nitrogen/air,

Nitrogen/carbon dioxide, H35/ nitrogen

In all processing technologies, the processing current is not suitable for 40-200 amps.

Groove cutting of all cutting materials (200)

Note: Attention should be paid to the comparison: the competitor listed the maximum cutting speed, but did not mention the speed that provided the best cutting quality as shown above. The cutting speed shown in the above figure can ensure the best cutting quality, and the cutting speed can be increased by more than 50%.

O 90 13 is a cutting quality standard, which defines cutting parts with thermal energy. The smaller the range (the lowest range is 1), the smaller the cutting angle of the cutting surface. The cutting angle of range 4 is better than that of range 5.

It aims to prolong the life of wearing parts and reduce the running cost.

The long-life process is controlled by microprocessor, which gradually increases the gas and current when the arc is started, and gradually decreases the current and gas when the arc is broken.

The precise control of long-life technology can significantly prolong the electrode life. According to the cutting duration and cutting mode, one electrode can be arced 1200 times without replacement.

SilverPlus？ The wearing parts of silver electrode have longer service life.

At present, the built-in high-frequency systems of HySpeed HT2000 and HySpeed HT2000LHF adopt the patented technology of SilverPlus silver electrode. This major improvement includes welding the silver front end to the copper electrode holder so that the silver surrounds the hafnium emitter. In many applications, this feature makes SilverPlus silver electrode effectively double the life compared with all standard copper electrodes.

System characteristics

The cutting speed is as fast as the competitor's 300-amp plasma system, but the cutting current is only 200 amps.

When the thickness of the cutting material is in the range of 1.2 mm to 50 mm, the output current is 50 to 200 amps.

Maximum low carbon steel