The servo hot-pressing forming machine for membrane electrode of fuel cell has the precise pressure range and control precision required by membrane electrode hot-pressing, the precision of temperature setting control range, the high flatness of mirror table and the table size matched with the effective area of membrane electrode. The hot plate has long-term anti-corrosion and anti-rust function, which makes the equipment run stably and safely.
The fuel cell membrane electrode servo hot-pressing forming machine adopts a four-column integral closed structure, and the guide pillar is quenched in high-frequency vacuum, which has the effect of tensile strength. The guide sleeve is guided by imported high ink bearing. The heating element is made of stainless steel carbon fiber heating rod, which is inlaid and cast. It has the characteristics of non-oxidation, impact resistance, safety and reliability, rapid and stable temperature rise and long service life. The temperature sensor samples the ambient temperature and feeds it back to the thermostat, which can realize accurate temperature control. The operation surface is provided with a safety fence. The hot plate has high parallelism and flatness and is stable in use.
The servo control system of the fuel cell membrane electrode servo hot-pressing molding machine has high precision and high energy efficiency, and the turnkey production line with active parallel control/mass production/storage of process parameters/manipulator and fixture technology is used for single operation of loading and unloading. The equipment can automatically control pressure, speed, position, temperature and time, and has the characteristics of multifunction, automatic control and high reliability.