Coal yard sweeper is a kind of vehicle specially used to clean the environment of coal yard. The parts and pipes in the vehicle are complicated, so it is inevitable to encounter large and small problems in daily operation and car maintenance. When encountering some common faults, such as the poor cleaning effect of the coal yard sweeper during operation, how to use simple inspection methods to eliminate the faults? The following methods shared by Shile Heavy Industry can help you quickly troubleshoot and find the reasons to solve them:

1. The straw is blocked;

solution: clean the suction nozzle and eliminate the blockage.

2. The filter screen at the interface between the dustbin and the fan is blocked;

solution: clean the filter screen to eliminate blockage.

3. The suction pipe is broken or dust collection system leaks air, and the back door is not closed properly;

solution: replace the straw, check the seals of all interfaces and close the back door.

4. When the suction nozzle works, the ground clearance is too high;

solution: adjust the ground clearance of the suction nozzle.

5. Improper inclination or rotation speed of the sweeping disk;

solution: adjust the inclination angle and speed of the sweeping disk.

6. The speed of the fan or auxiliary engine is too low, which does not match the road pollution situation;

solution: adjust the working speed of the auxiliary engine to match the road pollution.

7. The cleaning speed is too high

Solution: reduce the cleaning speed.

The above are the reasons and solutions shared by Shile Heavy Industry about the poor cleaning effect of the coal yard sweeper, sand leakage or brush marks. Drivers, the coal yard sweeper plays a role in maintaining the beauty of the road, the sanitation of the environment and the good pavement. When the cleaning effect is not good, the faults of the coal yard sweeper must be eliminated and solved, so as to ensure the good working effect of the coal yard sweeper.