The following faults may occur during the production process of the wheel bucket sand washing machine: 1. The bearings are easily damaged

Causes of faults:

(1) The bearings are not Oil or sealing ring is damaged;

(2) There is no regular maintenance and cleaning.

Solution:

(1) Add new grease and replace new sealing rings as required;

(2) Clean the bearings regularly. 2. There is noise in the bearing area

Cause of failure:

(1) The bearing is short of oil, and noise may occur;

(2) The bearing steel ring is broken, Or the bearing parts are worn, causing noise;

(3) There are sand and other impurities inside the bearing.

Solution:

(1) The bearing is short of oil, add lubricating oil in time;

(2) If it is caused by bearing wear, replace it with the original model Identical bearings;

(3) Clean the bearings in time.