The old GL8 turns on the power and does not ignite. Step on the accelerator three times in three seconds. When the alarm sounds, the maintenance light goes out. If it is a new GL8 Land Zun, there is a row of setting keys on your DVD control panel. Check the contents according to the logo of the oiler. When the percentage of oil life appears, press and hold the Enter key (∨). Just eliminate it!

The contact switch on the door or its wiring is faulty. Repeatedly opening and closing the door can easily lead to line wear or switch damage. It may be necessary to remove the door panel to handle this fault. I suggest you go to the service station for maintenance.

The new GL8 or the old one? Which version?

You can insert the key until the lock tongue of the lock cylinder is flat. If it gets stuck, you should use a file to correct it. Put the experimental lock tongue into the lock library, insert the key to try the smoothness, and finally install the circlip when it rotates normally. I suggest you do it yourself when you have time. You can save yourself more than 1000 yuan! ! If you find it helpful, please ...

In the wiper position of other models, under the steering wheel. It's Huai dang

The ignition time is a little delayed, and the carbon canister solenoid valve can't turn off the internal slip phenomenon of the transmission, that is, the clutch plate of the automatic transmission has poor performance, and the gearbox of the old Buick gl8 is particularly prone to problems.