1, solid The firmness of cement fence is the most concerned issue for customers. The cement fence is made of sand and portland cement, which is very strong after molding; The cold-drawn wire is used as the skeleton, which enhances the bending and impact strength of the product; After the fence is installed, the partition column and the bottom of the vase column are firmly fixed on the foundation, and the connecting rod plays the role of lateral support. The vase column with a height of 1.5m is only about 1.2m after removing the stigma, which greatly enhances the impact resistance of the vase column.
2. Beautiful. The cement fence has beautiful shape, smooth lines and rich colors. In addition to the traditional exterior wall paint and special paint decoration, the painting technology of art fence has also been developed. The application of imitation granite, white marble, antique copper and other paints and painting technologies has enriched the decorative appearance of the art fence, improved the decorative grade of the cement art fence, greatly enhanced the market competitiveness of the cement art fence, and significantly improved the income of investors, so discerning businessmen are choosing to invest in the cement art fence machine industry.
3, cheap. Due to the price increase of cast iron, the processing cost of wrought iron products is getting higher and higher, and the market price remains high. The raw materials of cement art fence can be seen everywhere, and the price is cheap, which is basically unaffected by upstream suppliers. For cement art fence manufacturers, this is a great advantage. There will be business opportunities if there are advantages, so investing in the cement art column machine industry now will definitely have broad development prospects.
4. No theft value and low maintenance cost. At present, most guardrails are made of wrought iron and stainless steel, and a few are made of PVC plastic, but they all have various disadvantages. Although wrought iron is beautiful, it is easy to be stolen and rusted, and needs painting and maintenance every year. Stainless steel is easy to be damaged and deformed, so it is not suitable for outdoor decoration. PVC products are prone to aging and breakage, and cement art guardrail solves various defects of other guardrails.
The application of cement fence in engineering is mainly reflected in three aspects: external wall guardrail, balcony and handrail. Compared with traditional wrought iron, cement products have their own advantages, but it is not optimistic that cement fence will replace wrought iron fence just around the corner, which needs the cooperation of the development of cement fence equipment industry. Only with the development of cement fence equipment industry, cement fence can replace traditional fence. (1) streamlined fence 1, improved fence forming machine, the equipment structure is more reasonable and compact, it can be used when plugged in, reducing the reinvestment of customers; 2. Built-in water circulation purification system prevents cement mortar from entering the pump and prolongs the service life of the pump; 3. The bearing bush is made of special non-metallic material, which has self-lubricating function in the moving state, outstanding wear resistance (friction coefficient is only 0. 1-0.3), no damage to the journal, and strong adaptability in harsh environment. 4. The shape of the vase column is completely updated, with smooth lines, roundness and freedom, and exaggerated shapes; 5. The beam is machined, with high production efficiency, smooth surface and clear lines. 6. Configuration table of streamlined fence equipment: Model price (/10,000 yuan) is equipped with the connecting rod mould of motor water pump vase column steel shaft separation column steel shaft for the supporting station. Note: Type A 1.98:0.5m 1 set: 0.6m 3 sets: 0.7m 2 sets: 1 set of 0.5m vase columns can be offline at the same time. Two 0.6-0.7m vase columns can roll down at the same time. Type b 2.68+0.2- 1.5 m: 2 sets of 0.5-0.8 m: 1 set 1.8 m: 1 set of two pairs1.2m vase. Type C 3.68, three sets, three sets 1.2- 1.5m: three sets 0.5-0.8m: two sets 1.8m: 1 three sets1.2-1. D type 4.98 four sets 1.2- 1.5m: four sets 0.5-0.8m: two sets 1.8m: 1 four sets1.2-1.5m vase columns can be used at the same time. Note 1. Customers who produce cement fences on a large scale can choose to buy the above equipment in combination. 2. For customers who purchase equipment, our company chooses to train special elastic putty, alkali-resistant sealing primer, real stone paint, antique copper, special latex paint for fence and high-gloss finishing agent technology. 3. Various types of equipment configurations can be exchanged at equal value according to customer requirements. (2), carved fence
1. The self-developed special centrifuge for fences is generally used to produce carved columns and vase columns of any specifications and shapes with a height of 40-200mm, which breaks through the limitation that one equipment of the traditional centrifuge can only produce one specification. With mold production, four carved columns or vase columns can be off-line in five minutes and demoulded in two hours, with high production efficiency.
2. Configuration table of carved fence equipment: The model production equipment is equipped with carved mold, beam mold, separation column mold, column head mold, carved column centrifuge, separation column centrifuge A 100 50 pairs of 5 pairs 1 set of B-type 200 pairs 100 pairs 10. Deputy 10 deputy 150 deputy 15 deputy 15 deputy two sets with one injection type d 400 200 deputy 20 deputy 20 deputy two sets with one injection 1. Configuration can be changed according to customer requirements. 2. Free training in special elastic putty, alkali-resistant sealing primer, real stone paint, antique copper, special latex paint for fence and high-gloss finishing agent technology. 1, streamlined fence: ordinary 325# portland cement, sand and cold-drawn steel wire.
2. Carved fence: 425# quick hardening cement, sand and cold drawing. According to the charges of each project, the charges of streamlined fence and carved fence are about 160- 180 yuan /m and 180-230 yuan /m respectively. Use textured artistic paint, and the charge per meter will be increased by 30-50 yuan. The investment can be recovered if the fence is installed 500 meters a year. Installing a fence of 5000 square meters a year can make a profit of 500 thousand. If the fence is installed more than 1 10,000 meters per year, the profit can exceed 1 10,000 yuan. The production cost of 50-70cm balcony vase column is about 2 yuan/root, and the reference price is 6 yuan/root. The daily output is 400, the profit exceeds 1,000 yuan, and the annual income is more than 300,000 yuan.