1. This series of hydraulic presses takes the hydraulic pressure of 1- 15MPA as the power source and is externally connected with three-phase AC380V 50HZ or three-phase AC220 60HZ. The total power consumption does not exceed 3.7KW.

2. This series of equipment is produced by Xintai Ming Factory. Liquid is used as the medium to transfer energy, which is flexible in control, easy to realize automation and fast in operation.

Uniform and stable, compared with pneumatic equipment, the speed and pressure are adjustable and controllable, the output adjustment range is large, the independence is strong, the performance is more stable, and the press-fitting quality of products can be greatly improved.

3. The noise of the equipment during standby shall not exceed 80 decibels.

4. The solid and open structure welded integrally can keep the fuselage rigid enough and have the most convenient operation space.

5. There are two control modes, manual and semi-automatic. Manually, you can stop pressing the upper die within any travel range, equipped with an emergency pick-up button, or you can install an infrared hand protector.

6. The pressing stroke of this series of presses is generally controlled by timer, pressure switch, position sensor or customer's own mold.

7. The rebound height of the press-fitted spindle can be adjusted within any travel range by timer or position sensor.

8. The descending and ascending speeds of the spindle are 90 mm/s for 3tf, 75 mm/s for 5tf and 68MM/S for 10tf.

9. The pressure, stroke, holding time and closing height can be adjusted by customers themselves, which is convenient to operate;

10. The hydraulic system instrument is built in the frame, with neat, light and stable appearance.

1 1. It has automatic counting function and can also be equipped with dynamometer display, which can be customized according to customer requirements.

12. The output range of this series of hydraulic machinery is 3tf. 5tf。 10tf。 Optional. ( 1tf= 1000kgf=9.8KN)。