(1) Looking for raw materials: The shape of raw materials is very important for making a satisfactory crutch. You can't make a silk purse out of sow's ears. (2) Cutting: After finding suitable raw materials on the mountain, cut them properly, leaving suitable parts and lengths, and take them home for subsequent processing. "Long carpenter and short blacksmith", don't be too hard when cutting materials, leave some length appropriately, in case the raw materials are cut short, it will be wasted. ③ Straightening: Natural raw materials are generally curved and cannot be used directly. Bake it with fire, heat it and then straighten it hard. (4) Peeling: use tools such as knives and percussion to remove bark from the surface of raw materials. ⑤ Molding: Cut, chop and drill the raw materials according to their favorite shapes to make the prototype of crutches. ⑥ Polishing: Use gauze to polish the bark, burr and defects formed by knife cutting on the crutch surface to form a smooth and symmetrical surface. At this point, the beloved crutch can be used. ⑦ You can also use tung oil or varnish to add a layer of protection to crutches, which can not only increase the appearance, but also prevent crutches ... ① Find raw materials: the shape of raw materials is very important for making a satisfactory crutch. You can't make a silk purse out of sow's ears.

(2) Cutting: After finding suitable raw materials on the mountain, cut them properly, leaving suitable parts and lengths, and take them home for subsequent processing. "Long carpenter and short blacksmith", don't be too hard when cutting materials, leave some length appropriately, in case the raw materials are cut short, it will be wasted.

③ Straightening: Natural raw materials are generally curved and cannot be used directly. Bake it with fire, heat it and then straighten it hard.

(4) Peeling: use tools such as knives and percussion to remove bark from the surface of raw materials.

⑤ Molding: Cut, chop and drill the raw materials according to their favorite shapes to make the prototype of crutches.

⑥ Polishing: Use gauze to polish the bark, burr and defects formed by knife cutting on the crutch surface to form a smooth and symmetrical surface.

At this point, the beloved crutch can be used.

⑦ You can also use tung oil or varnish to add a layer of protection to the crutch, which can not only increase the appearance, but also protect the crutch from water, moisture, pollution and acid and alkali erosion. After brushing dry, polish it with fine sandpaper and brush it again, usually 3-5 times.