Car tire repair address: Siping Road, Kuiwen District, Weifang City, Shandong Province.
Tire eating in trucks: The four-wheel positioning is inaccurate, resulting in the four tires not being in the horizontal and vertical straight lines required by the standard. The two wheels on the same side will eat up the tires when running, and the front or rear wheels will not move. The straight-line vehicle corrects itself, causing an abnormal increase in friction between a certain part of a tire and the ground to accelerate wear.
The solution to truck tire wear is as follows:
Method 1: Adjust the tire pressure. If the tire pressure is too high or too low, it will cause uneven tire wear and cause the tire to "eat". If the tire pressure is too low, the tire will bend inward, which can easily lead to serious wear on the edges of the tire; if the tire pressure is too high, the middle part of the tread of the tire will wear faster. Therefore, you should always pay attention to ensuring normal tire pressure. It is best to inflate according to the specified tire pressure in the lower corner of the car door.
Method 2: Perform wheel balancing on the tires regularly. If the tire has been repaired many times or if it feels like it is wobbling, it is necessary to perform a tire dynamic balance test in time to see if there is any problem with the tire. If the tire is found to be unbalanced or other problems, a balancing lead weight should be installed to maintain balance to avoid "tire eating". Phenomenon.