Details are as follows:

HTL-TTL signal converter converts the collector pulse signal (NPN, PNP) of PLC or upper computer into differential pulse signal, and provides it to the controller (servo). The anti-interference ability of differential signal is stronger than that of collector signal. The input and output of the converter are isolated by high-speed optical coupler, which greatly improves the anti-interference ability. If you have any questions, please contact me.

qq: 1525382675

Collector pulse signal to differential pulse signal converter

HTL-TTL-04

I. Specifications of technical parameters

Operating voltage range

The working voltage range is 24V(DC).

Output parameter output data

Output DC voltage

The input DC voltage type A is a differential signal with TTL level of 0-5V.

Typical input current

Input current type of Un 5 mA

Typical transmission frequency

The frequency of that transmit variable frequency pulse is 0-200 KHz,

Input parameters input data

Input signals NPN and PNP

Low level output voltage Conventional output low level is

Continuous load current output current

Continuous load current normal output 25 mA

Typical switching speed

Closing delay MHM-02a/02b/02at/02bt: rising time 140ns falling time 60ns (nanoseconds).

Mhm-02ao/02bo: ton0.5 ustoff1us (microseconds)

Typical operating parameter types general data

Input at most two groups of AB collector pulse signals (NPN, PNP).

At most, two groups of AB differential pulse signals are output to increase the anti-interference ability of pulse signals.

Input-output isolation voltage

Input/output isolation voltage 2500 V

operating temperature range

Working temperature range -20-+85℃

outline dimension

Overall dimensions125mm (height) × 70mm (width) × 30mm (depth)