In household hygiene and cleaning, all-in-one sweeping and mopping machines are becoming more and more common. Many people will buy an all-in-one sweeping and mopping machine for use at home. Regular cleaning of the integrated sweeping and mopping machine can make the use of the integrated sweeping and mopping machine more convenient. The service life is longer, so how to clean and maintain the all-in-one sweeper and mop machine? How to clean the scale in the water tank of the all-in-one sweep and mop machine? Today, the editor will answer them one by one for you.

1. How to clean and maintain the all-in-one sweeping and mopping machine

1. Clean the side brushes. Use tweezers and a vacuum cleaner to clean the dust and hair inside the socket, and pull off the hair around the plug directly with your hands and wipe it clean with a rag.

2. Cleaning of roller brush. Just wipe it clean with a wet rag. Pay special attention to the shaft wheels at both ends of the roller brush. They need to be disassembled and cleaned. Some hair may be entangled, so clean them. Use the blade on the cleaning tool to clean the bristles.

3. Every time you use the sweeping and mopping machine, clean the following parts with a dry cloth: the garbage box; the left and right wheels; rotate the sweeping brush at the bottom by hand to remove the dust on the brush. Clean; sweep the brush while cleaning, and reshape; open the vacuum cover, clean the vacuum chamber and fan; wipe the four sensor heads at the bottom of the front shell with a clean cloth.

4. The all-in-one sweeping and mopping machine will automatically return to the charging base to charge after each work, and waits for the next scheduled cleaning to start automatic cleaning. If the all-in-one sweeping and mopping machine will not be used for a long time, unplug the power cord from the socket, take out the battery of the all-in-one sweeping and mopping machine, put it away, and store it in a dry place.

5. The bottom of the fuselage of the all-in-one sweeping and mopping machine is the hardest hit area where dust easily accumulates. Excessive dust will obscure the infrared sensor, and will enter the inside of the machine and cause the motherboard to short-circuit and burn. At the same time, hair is easily caught. Entering the tire module affects the forward speed of the sweeper. You can use bottled compressed air, or choose an air blower or ear-blowing ball to clean the gaps at the bottom of the machine. Do not blow with your mouth to avoid saliva entering the inside of the machine and causing a short circuit failure.

2. How to clean the scale in the water tank of the all-in-one sweeping and mopping machine

The water tank of the all-in-one sweeping and mopping machine is designed with a water inlet. Open the rubber plug at the water inlet of the water tank and add water into the water tank. There are some detergents to remove scale, but be careful that the detergent cannot be strong alkali or acid, otherwise it may damage the sweeping and mopping machine.

For all-in-one sweeping and mopping machines, pay attention to regular cleaning of the side brushes and roller brushes of the machine. Keeping the side brushes and roller brushes clean can achieve better cleaning results. Do not use strong acid and alkaline cleaners when cleaning the water tank of the all-in-one sweeping and mopping machine.