Today we tested a 20 16 BMW Li. The customer drove to the store for a test. He just bought a used car. After driving for a few days, he always felt that there was something wrong with the car. He is afraid that he has bought an accident car or a soaking car, and all kinds of worries. Under the introduction of a friend, he came directly to our vehicle inspection workshop for testing. Ok, let's take a look at this car.

As usual, we start with the appearance. Our inspector turned the car around first, and the appearance was partially repaired, such as front bumper replacement, hood sheet metal, right fender sheet metal, right headlight replacement and front windshield. Yes, the four-wheel hub is scratched. Next, let's check the engine room.

When you open the engine compartment, you can see that the fixing screws of the hood have not been removed, the fixing screws of the fenders on both sides have not been removed, the water tank rack has not been removed for cutting, and the right front headlight has also been replaced. The fixing screws of the engine and its accessories, the connecting screws between the engine and the gearbox, the water tank, the condenser and the electronic fan are all free of disassembly marks.

We came to the cab to check the seat belt, confirmed the replacement of the right front seat belt according to the date, and pulled the seat belt by hand to check the early warning force. By observing whether there are signs of mildew and water stains on the surface of the seat belt, whether the fixing screws of the vehicle seat are removed, whether the frame under the seat is rusted, whether the steering assist, cigarette lighter and instrument panel frame are rusted, and whether there are deposits on the carpet, we can determine whether there are signs of blisters on the vehicle, whether the fixing screws on both sides of the instrument panel are removed, whether the fixing screws of the main airbag and decorative panel are removed, and whether the wear degree of the gear lever, brake pedal and seat is observed in the gaps between panels, and judge the vehicle according to the current mileage. After inspection, the cab is in good condition.

Check the connecting rod screws of the left and right suspension in front of the chassis for no disassembly trace, replace the left and right engine claws, remove the fixing screws of the engine claws, observe that there is no oil leakage trace on the whole chassis, and analyze the engine through connecting rod screws, and find that there is no disassembly and maintenance trace on the whole gearbox. Seen from the chassis, there are no molding marks on the two front longitudinal beams and beam heads, no disassembly marks on the fixing screws of the rear suspension and oil tank, no deformation and disassembly marks on the two rear longitudinal beams and their rear anti-collision steel beams, and no deformation on the rear apron, so it can be confirmed that there is no rear-end collision accident at the rear, and the chassis is in good overall condition.

This 20 16? The BMW 525LI is still good. Although some parts were replaced, no serious accidents occurred. Our inspector told the customer about the car condition, which reassured the customer. I would like to remind you that you must test the used car before paying the money, so as not to cause unnecessary trouble. Bian Xiao will talk to you here today. If you have any questions about used cars, you can leave a message below or call the service number of the car inspection workshop. We will answer your questions one by one. This is the car inspection workshop, an independent third-party inspection agency, which sets out from reality and tests the real car condition, so that you can rest assured of buying a car.

This article comes from car home, the author of the car manufacturer, and does not represent car home's position.