The adjustment method of Camry rearview mirror is as follows: the vehicle rearview mirror is adjusted on the door handle. Turn to L to adjust the left rearview mirror angle, turn to R to adjust the right rearview mirror angle, and turn to the middle to close the rearview mirror. The rearview mirror is a tool for the driver to directly obtain external information such as the back, side and bottom of the car while sitting in the cab seat. For the convenience of drivers, it can prevent traffic accidents and ensure personal safety. Camry's front face is X-shaped, and its air intake grille is made of black mesh material, while the Toyota logo in the center is decorated with blue elements, which has outstanding visual effects.
Camry is not equipped with the function of reversing rearview mirror automatically turning down, which needs to be installed in 4S shop. When reversing, the rearview mirror automatically turns down, which means that the right rearview mirror can automatically adjust the angle and turn down after the vehicle is engaged in R gear, so as to facilitate the driver to know the ground situation.
The rollover function of rearview mirror is mainly to facilitate the owner to observe the situation under the right car body when parking. To a certain extent, the owner can observe the distance between the rear wheel and the roadside obstacles or kerbs through the rearview mirror to prevent the low obstacles on the side of the car from scratching the rim or body when reversing, so it is very important to master and make good use of this function.
Toyota Camry has an adjustment button on the door panel. The position of the adjusting lever is at the upper right of the door, and the left and right doors are symmetrical. Pull this lever to adjust the rearview mirror. For Toyota Camry's right exterior rearview mirror, the image of the ground plane in the rearview mirror is adjusted to 2/3 of the mirror height, and the image of the right body is adjusted to occupy the left side of the mirror14. Let the ground image occupy more area of the right rearview mirror, which can make it easier for the driver to grasp the road surface on the right side of the vehicle and the distance between the car body and the curb when parking. For the left exterior rearview mirror, adjust the image of the horizontal line in the rearview mirror to the mirror center, and adjust the image of the left body to the area occupying the right side of the mirror 1/4. (Photo/Text/Photo: Guo Shanshan-Part-time job) Label: How to set the rollover function of Camry rearview mirror Copyright statement: This article is reproduced to convey more information. If the source is marked incorrectly or infringes on your legitimate rights and interests, please contact this website with the ownership certificate, and we will correct and delete it in time. Thanks for your support and understanding.