2. Use diesel oil (kerosene is also acceptable). You can use bubbles. Usually use diesel oil to soak rusty screws. If not, spray some laxatives. Get some cooking oil at home and drop it on the shaft and wait.

3. Soak the whole moving part in front of the vise in gasoline. When you exercise hard in the future, rusty gasoline will flow out. When you are flexible, you can drip oil. 10 minutes can be easily done.

Extended data:

1. It is forbidden to knock against, damage or burn the insulated handle during the use of wire cutters, and pay attention to moisture protection.

2. To prevent rust, the clamp shaft should be oiled frequently.

3. When live working, the distance between the hand and the metal part of the wire cutters should be kept above 2 cm.

4, according to different uses, choose different specifications of wire cutters.

5, can not be used as a hammer.

Fuyongda Wentu Hardware Business Department of Baoan District, Shenzhen mainly produces all kinds of hardware tools and needle-nosed pliers. Diagonal pliers; Nozzle pliers; Stripping pliers, power pliers, circlip pliers, American pliers, European pliers, wire cutters, mini pliers, water pump pliers, Ruyi pliers; Wire cutters; Carp pliers stainless steel series scissors; Model pliers, jewelry pliers; Clamping tools, etc.