Green jadeite looks better with platinum, because of the strong contrast, generally colorless jadeite will consider using gold or rose gold.

It has a little water head, the color is average, the size is too small and too thin, the jade is of little value, and the bare stone is only a few hundred dollars, so it is enough to be inlaid. It's about 1000 yuan if it's inlaid with silver, and two or three thousand yuan if it's inlaid with gold.

The back cover of the jade ring is usually inlaid, and the beauty will be higher if it is pasted with foil. For jadeite with relatively good water, the back cover can also improve the light transmittance of jadeite, make jadeite look brighter and brighter, and make jadeite more ornamental.

Normal. The blue color of jadeite is generally blue water jadeite, which belongs to a kind of ice jadeite. Blue water jadeite is a kind of jadeite, light blue and delicate in texture, which is a relatively rare variety.

It means that a layer of gold is sealed under the jade surface, which plays a role in highlighting the head and color and covering up the defects. Usually, the white background protrudes above the water head, and the yellow background is lower to cover up the defects.

How to seal the jade ring with tin foil?

Sealing means that the bottom of the inlaid jade is completely sealed, and the bottom of the jade cannot be seen. This mosaic method is more common in relatively thin jade brands. The net is sealed at the bottom of jade with mesh metal as the back cover. Because it is hollow, you can see part of the inside.

Yes, I have been in this situation. With the addition of tin foil, one looks brighter and the other deepens the color of jade.

It means that a layer of gold is sealed under the jade surface, which plays a role in highlighting the head and color and covering up the defects. Usually, the white background protrudes above the water head, and the yellow background is lower to cover up the defects.

What are the advantages and disadvantages of the jade inlaid back cover?

First of all, the jade back cover is actually very common in the industry. The inlaid back cover can better protect jadeite and effectively reduce the damage caused by collision. Therefore, in fact, many high-grade jadeites will be back-sealed when they are inlaid for better protection, which is completely different from everyone's previous cognition.

For jadeite with relatively good water, the back cover can also improve the light transmittance of jadeite, make jadeite look brighter and brighter, and make jadeite more ornamental. In fact, the back cover of jadeite can also protect jadeite, so that jadeite is not easily damaged.

The disadvantage of inlaid jade back cover is that some merchants cover the back cover of jade in order to cover up the defects at the bottom of jade, so that the thickness and defects of jade products after back cover are not easy to see clearly. In this way, merchants can sell inferior products at high prices.

The back cover inlay can better protect the main stone of jade and effectively reduce the damage caused by collision. It is convenient to wear, and the tightly stitched package is safer, and the probability of the main stone falling off when wearing is lower. The back cover helps the light to reflect back and makes the jade look more beautiful.

The third point: adjust the color of jade. Mosaic color matching is very common, and the rich color of jadeite can be adjusted by mirror radiation effect and light control. In fact, the back cover is common in jadeite characterized by color, which can show the richness of jadeite to a greater extent and give play to the advantages of color.

Is the back cover plated with jade and tin?

The back cover of the jade ring is usually inlaid, and the beauty will be higher if it is pasted with foil. For jadeite with relatively good water, the back cover can also improve the light transmittance of jadeite, make jadeite look brighter and brighter, and make jadeite more ornamental.

Sealing means that the bottom of the inlaid jade is completely sealed, and the bottom of the jade cannot be seen. This mosaic method is more common in relatively thin jade brands. The net is sealed at the bottom of jade with mesh metal as the back cover. Because it is hollow, you can see part of the inside.

This is definitely cheating consumers. There are many such businesses now, but I don't know if I can defend my rights. You still need to find a reliable merchant to buy jewelry like jade. You should earn more than ten times if you make a rough estimate.

Sometimes jadeite with a back cover is more suitable to wear than jadeite without a back cover. However, it is suggested that you buy inlaid jadeite with a' live' back cover, so that you can take advantage of the back cover and actually see the internal situation of jadeite, and avoid merchants from deceiving consumers with jadeite with serious defects or' egg shells'.

According to the shape of the back cover, the back cover can be divided into three categories: open cover, full cover and net cover. The first point: protect jadeite from collision. The back cover is protective to prevent the jadeite from being damaged by bumping. Even if it falls from a height, it can play a good buffering role and has a reinforcing role.

How is the jade inlay processed?

1, with pointed inlay, the jade is buckled on the bracket with metal claws, and the jade has the least cover, so that the surrounding light can shine on the jade, showing its unparalleled elegance. Pointed mosaic is the most commonly used mosaic method for jadeite.

2, design sketch, generally speaking, before the jade inlay, the designer will first conceive and design a sketch. Carve the wax board. The master carves the wax board by hand according to the sketch. Metal stamping is to select some suitable metals, such as K gold and silver, as materials to make various parts.

3. Claw setting means to leave small claws on the ring holder, and then use these small claws to tightly fasten the top of the jade, thus fixing our jade. In fact, claw inlay is a common way of jade inlay, because it can show the beauty of jade to the maximum extent.

4. Design draft, which is the first step and a very important step of jade inlay. Jewelry designers draw sketches according to the shape and size of jadeite raw materials, and then give them to skilled jewelry masters to complete their works.

What does an emerald ring with a back cover mean?

Increasing the reflected light and water head on the back cover can also protect the thin jade from being broken. Generally speaking, high-quality goods are not returned, only defective products or fakes will be returned.

The back cover of the jade ring is usually inlaid, and the beauty will be higher if it is pasted with foil. For jadeite with relatively good water, the back cover can also improve the light transmittance of jadeite, make jadeite look brighter and brighter, and make jadeite more ornamental.

Jade back cover refers to covering the bottom of jade with inlaid metal. According to the degree of coverage, it can be divided into three types: window-opening type, full-sealing type and net-sealing type. Open the window. You can open the small cover on the back cover of jade, through which you can observe the water, color, internal structure and other related contents of jade. Seal it off.