1. Ultra-thin: the thickness is between 1cm and 4cm.
2. Beautiful: suitable for any fashion area.
3. High efficiency and energy saving: more than 60% energy saving than traditional light boxes.
4. Brightness: The line light source is an area light source, which makes the illumination more uniform, softer and more comfortable.
5. Convenient installation: quick-opening design makes it easier and faster to replace lamps, and it can be replaced by itself within five minutes.
6. Patented light guide technology design: Its principle and effect can be comparable to the LCD screen of notebook computer.
Introduction of light source
The electrodes of EEFL (external electrode fluorescent lamp) tube are outside the tube, which is different from ordinary fluorescent lamp. The electric field generated between the external electrodes forms the luminous plasma of the lamp tube.
Advantages of EEFL light guide plate ultra-thin light box:
1, various sizes (the length of the lamp varies from 20- 170CM, and can be combined at will).
2, high energy saving (according to the length of the lamp, the power is only 3-6 watts, and the comprehensive energy saving is 50%-70%)
3, long service life (its principle determines long service life, good stability, high efficiency, up to 60,000 hours, three years of quality problems, free replacement)
4. Small size (the diameter of the lamp tube is 0.5-0.8 cm, saving the volume of the light box)
5. Low temperature (the surface temperature of the lamp tube is only about 38 degrees, which is very safe for indoor use and reduces the air conditioning load)
6. Multicolor (red, yellow, blue, white and green, with color temperature of 2500K- 17500K).
7. Uniform light (EEFL can form a uniform plasma column along the tube axis to make the light emission uniform)
8. Drive multiple lamps (EEFL is powered by ballast (EEFL), and one can drive multiple lamps).
9. Maintenance-free (saving lamp replacement personnel and lamp cost)
Technical specification of products
Our ultra-thin light box products are divided into aluminum frame series, stainless steel frame series, crystal frame series and plastic frame series. We named them AF type, SSF type, CF type and PF type respectively. ......
Product framework
Aluminum alloy profile, surface oxidation treatment, silvery white (surface can be customized with metallic paint)
Product light source
Divided into energy-saving lamps, LEDs and EEFL.
The energy-saving lamp adopts Philips or Osram T5 tube. In line with international standards, the light efficiency exceeds 65,438+000 lm/w and the service life exceeds 65,438+00,000 hours. T5 high-efficiency energy-saving lamp adopts three-color rare earth powder fluorescent tube, which has no radiation, is thinner than T8 tube, has higher luminous efficiency, has no flicker, is close to natural light, has high color rendering index, and the illuminated object is bright, clear and bright. Under the same power consumption, T5 high-efficiency energy-saving lamp saves energy by 35%~50% compared with T8 fluorescent lamp, reduces line current by 3 times, and prolongs its basic non-heating life by 2~3 times, thus realizing energy-saving and environmental-friendly green lighting.
The luminous efficiency of EEFL exceeds 168Lm/W, and its service life exceeds 60000 hours. EEFL adopts hard glass tube-high borosilicate glass, which is thinner than T4 tube, and EEFL energy-saving lamp saves more than 50% energy than T4 fluorescent lamp.
LED light bars are divided into high-density LED light bars and general-density LED light bars.
High-density LED light bar: 1 meter gundam 148 LED lights, with power of 9W per meter and service life of over 50,000 hours.
General density LED light bar: 65 LED lights per meter, with power of 4W per meter and service life of more than 50,000 hours.
materials classification
Using optical grade acrylic board, after precise calculation, using laser spot, thickness of 5MM, in line with international CCC and CE certification standards. Light guide plate is divided into engraving light guide plate and screen printing light guide plate. The product panel is made of optical grade acrylic board with a thickness of 1.8MM, which has passed CCC and CE certification and reached international standards. PC is the best cover! Maximum temperature 145 degrees, minimum temperature -45 degrees. PC is an amorphous, odorless, nontoxic and highly transparent colorless or yellowish thermoplastic engineering plastic with excellent physical and mechanical properties, especially excellent impact resistance, high tensile strength, bending strength and compressive strength. Small creep and stable size.
ballast
The line current is reduced by 3 times, and it reaches the international standard after CCC and CE certification.
Performance calculation
1.T5 lamp
14W Length 590mm
2 1W length 890 mm
28W long 1 190mm
Light box power W = lamp power corresponding to the length of light guide edge multiplied by 2.
2.LED light bar
Light box power w (high density) = (light guide side length mm-30) × 0.0 176.
Light box power w (general density) = (light guide side length mm-30) × 0.0088.
6. Aluminum strip
Aluminum alloy material, high thermal conductivity, good heat dissipation effect, keep the lamp temperature below 60℃. Can protect the lamp tube, so that the lamp tube is not easy to break.
Safety instructions
1. In the process of manufacturing and transporting the light guide plate, great care should be taken to prevent the light guide plate from breaking.
2. When cleaning the light box, gently wipe it with soft textiles after it is wet.
3. Do not use sharp tools when removing the protective film on the surface of the light guide plate.
4. Pay attention to safety when installing the light guide plate. definition
The thickness of ultra-thin light box is 2cm- 13cm, and it can be divided into two categories: EEFL green energy-saving ultra-thin light box and light guide plate ultra-thin light box.
classify
①LED ultra-thin light box; ② Stainless steel ultra-thin light box; ③ ultra-thin light box made of aluminum; ④ Crystal ultra-thin light box /LED crystal light box; ⑤ Plastic ultra-thin light box.
trait
① Energy saving: Compared with the traditional light box with the same area, it uses fewer light sources and saves more than 80% electricity; ② Environmental protection: more than 95% materials can be recycled; ③ Ultra-thin: the thickness is only a quarter of that of the traditional light box, which is economical and beautiful; ④ Convenience: It is simple and quick to install and replace lamps; ⑤ Uniform light: Uniform light, complete plane light output; ⑥ Beauty: Advanced light guide design ensures that the heat generated by the lamp tube will not make the lamp yellow.
Application method
1, municipal plane lighting system, square floor lamp project, park attraction introduction project, local lantern festival project, community publicity column project, bus shelter project, bank self-service withdrawal project, telephone booth project, power emergency project, building exhibition project, airport passage project, subway station exit project, etc. 2. Exhibition halls, museums, libraries, gymnasiums, art galleries, exhibition halls, opera houses, universities, middle schools, vocational schools, hospitals, banks, insurance, securities and other decoration and publicity projects. 3. Wall painting and beautification works for hotels, guesthouses, restaurants, mountain villas, teahouses, western restaurants, cafes, cake rooms, bakeries, bars, karaoke bars, dance halls, saunas, beauty salons, fitness rooms, health centers, etc. 4. Conference center, exhibition center, accreditation center, municipal engineering, department store, supermarket chain, shopping mall, jewelry monopoly, cosmetics chain, beverage trade, tobacco and alcohol trade, fast food chain, medicine chain, stationery center, boutique center, furniture center, household appliances wholesale, musical instrument monopoly, etc. 5. Wedding photo studio, home improvement, architectural decoration, design institute, planning institute, product design center, bridge building, etc.
Safety instructions
When installing or repairing ultra-thin light box, attention must be paid to prevent damage to the light guide plate. The following operating specifications shall be observed: 1. In the process of manufacturing and transporting the light guide plate, great care should be taken to avoid the light guide plate from cracking. If you need to store the light guide plate for a long time, please put it in a dry, flat and tidy place. 2. If there are handprints or dust on the surface of the light guide plate, when it is necessary to clean the light guide plate, it should be gently wiped with soft textiles after getting wet. Wear cotton gloves to avoid leaving any fingerprints and scratches on the surface of Aixing light guide plate. 3. Do not use sharp tools when removing the protective film on the surface of the light guide plate. 4. When installing the light guide plate, handle it with care and pay attention to safety.
If it's ultra-thin light box of eefl, you don't have to worry about the light guide plate, because there is no light guide plate in EEFL's light box, but you must also pay attention to handle it with care to avoid breaking the light. There are many kinds and styles of light boxes, including plastic light boxes.
Blister light box is a kind of widely used acrylic light box, which has developed very rapidly in recent two years. It is mainly used outdoors, and it is often used as a shop sign and billboard. As long as you pay attention, you can see it everywhere in the street.
The application of plastic light boxes in McDonald's and other stores has played a good demonstration role. The application of acrylic plastic light box in gas station of China Petrochemical Company and the display in terminal stores of major mobile phone manufacturers not only created good advertising benefits for manufacturers, but also promoted the application of acrylic plastic light box in the market. Acrylic plastic light box has become another bright spot in advertising industry after neon lights, ink paintings and sculptures. It and ultra-thin light box * * * have become the mainstream products of advertising light boxes.
Processing technology
Processing technology of three-dimensional luminous characters for plastic light boxes-Because of the stable quality of acrylic, its products have the characteristics of good light transmission, clear farsightedness, high compressive strength, colorfastness for more than ten years, and bright as new, which is incomparable to other light boxes and metal characters. It is the first choice for businesses with sustainable management and strong strength. From multinational companies McDonald's, KFC and Pizza Hut to domestic supermarket chains, banks and Jiefang commercial vehicle service centers, there are huge business opportunities for advertising product identification. Acrylic processing is inseparable from the mold. The mold can be made of wood, gypsum, steel, etc. And the material selection of the mold can be decided according to the number of processing batches. Wood model saves cost and is only suitable for small-scale processing, because it will lose water and deform after being used for a long time, and the finished product is naturally unsightly, which also brings trouble (need to be treated) to post-production. The pre-production of blister light box is the same as that of three-dimensional luminous characters: film making → heating (about 160 degrees) → automatic vacuum suction → cooling (about 40 degrees) → film stripping → trimming → adding grooves → three-dimensional luminous characters. (Trimming → Bonding words and panels → Block splicing → Blister light box).
Modeling can be done by woodworking puzzles or computer carving. The hole should be slanted, and the stool can be peeled off. Proper heating temperature does not mean that the higher the temperature, the better. When the temperature is high, the acrylic board will crack and lose its elasticity, and the pressure absorption depth is not ideal. Automatic vacuum suction system and intelligent temperature control automatic control system are the core components of acrylic processing equipment, while other heating boxes and frames are relatively simple. There are two kinds of cooling: natural cooling and air cooling. The timing of demoulding should be well grasped. If it is early, the characters will be deformed. If it is too late, it will be difficult to demould, and the possibility of reusing the mold will be small. Trimming is to fix the trimmer for carpentry on an ordinary desktop and trim it with a straight knife. "Adhesion" is very important in acrylic products, and sealing, firmness and no flow marks are the keys to ensure the perfection of products.
Due to the size of the text, the thickness of the acrylic board is determined. Generally, the character thickness below 25 cm is 2mm, and the character thickness should be below 2cm. The thickness of words over 2 m is 5 mm, and the upper part of some words cannot be sucked in place because of the different stroke spacing. If the stroke depth of the characters is consistent, we can only use KFC character processing technology to cut out the characters first, then cut out the edges of the characters and stick them together. This process is similar to the metal word addition process. If a painting is multi-colored, you have to make corresponding molds according to different colors. For the later docking, the thickness and inclination of acrylic plate should be considered in the mold. A picture of multi-color and monochrome plates can be sucked out, pasted with different colors and heated with a welding torch, and a perfect product can also be obtained. In the production of plastic light boxes, the panels and characters can also be molded by plastic suction at one time, and then the color paste can be attached to the surface of the characters. But be sure to stick it with a high-quality color-stable light box such as 3M.
The frame of the blister light box is the same as the traditional light box, except that the thermal expansion coefficient of acrylic plate is large, and the shrinkage is about nine times that of metal, so it is necessary to leave room for expansion when installing or fixing.
If you are facing the regional market, you don't have to look for a screen printing machine. Because the quality and processing technology of acrylic determines its high price. Screen printing from plate making to printing, small batch is not cost-effective, if the two together, the price is unacceptable to ordinary users. After receiving the order, you can print it in a professional screen printing factory, which is cheap and saves money. Why not?
Main application fields
1. Buildings, such as windows, soundproof door walls, lampshades, solar collectors and telephone booths.
2. Advertising display categories, such as light boxes, signboards, signboards, display stands, ball covers, signboards, etc.
3. Industrial products, such as instrument panels, machine shields and flowmeters.
4. Lighting, such as fluorescent lamp covers and lampshades of various shapes used for environmental purification equipment.
5. Civil categories, such as bathroom equipment, dressing tables, photo frames, shelves, gifts, souvenirs, cool chairs, candy boxes, information racks, food covers, etc.
6, medical category, such as baby incubators, kits, thermostats, operating cabinets.
7. Special purpose categories, such as windows and windshields of airplanes, yachts and automobiles, periscope of submarines and trenches, etc.
Light box price
On the algorithm of plastic word price: many people in the industry have never understood the algorithm of plastic word. Now let's talk about the algorithm roughly: plastic characters are usually calculated according to the longest side of the word, and the longest side of the word is less than one meter in centimeters; If the longest side is higher than or equal to one meter, it shall be calculated as a square. It should be noted here that if one side of the word is more than one meter and the other side is only forty or fifty centimeters, then the calculation should be as follows: (word length+word width) ÷2× unit price; The algorithm of blister light box is basically the same, but it needs to be divided into one side or two sides.
Color image processing of light box
Many companies' LOGO or design images are not a single color, so plastic light boxes have to deal with many colors, and there are many ways to treat acrylic surfaces. Here are some to share with you:
1. Useful film pasting method: For simple or technically unqualified products, for those with relatively small quantity but cost to be considered, for example, we use film pasting, but it should be emphasized here that we should not use those films that are cheap and easy to fade in the market, and we must use those outdoor brand lamp films with long shelf life, otherwise the maintenance cost will be high, so the temporary low cost will lead to higher maintenance cost;
2. Screen printing: This is a very common picture processing method for blister light boxes, and it is also ideal, especially when we have a certain amount, but we must use good ink when screen printing, because our plates have to be baked and pressed at high temperature; Otherwise, it is easy to scratch in the production process and fade after a period of use;
3. There is also an outdoor photo lamp: generally, the number is very small and it is difficult to aim, but it must be an outdoor lamp.
Making blister light box
65438+
2, material selection, there are many kinds of plastics for light boxes, ABS, PC, PMMA, Nott blister light boxes summed up, using PMMA as light boxes is the best material, other plastics such as ABS and PC are cheaper, but the effect is not as bright as PMMA, so I suggest you use PMMA as light boxes.
3. The thickness of profile and aluminum profile is the key. General profile thickness should be 1.2mm, and larger light boxes should be supported by angle steel.
4, lamps, I suggest you support domestic products, hehe, thank you.
Key points of production
The first is material selection. At present, the acrylic sheets seen in China are basically imported or produced by foreign joint ventures, and the quality of the sheets should be said to be relatively good. The reason why the market price of acrylic blister light box is high is the high price of plate. The unit price of acrylic sheet in the market is generally 20-25 yuan/kg, which is not only high in unit price, but also low in the utilization rate of the whole sheet in the production process and high in cost amortization.
The second is mold making. As we all know, acrylic board is formed by vacuum positioning and suction. Even the same word with different sizes needs different molds, and the mold production itself requires high precision and good quality. Because the precision and quality of the mold itself are directly related to the quality of acrylic products, and the mold manufacturing technology is high, it needs experienced technicians. Therefore, as mentioned above, the blister light box on the market has been at a high price, and the processing of the mold should be said to be the most important technology.
The third is post-production. As mentioned above, the production of acrylic plastic absorption is basically mechanized, and the application of some new equipment has greatly reduced the labor intensity of workers while improving production efficiency. After the basic molding of the acrylic plastic absorbing material, it has to go through several processes, such as edge milling machine, router, polishing and so on. Finally, the light box is laid with a light source and baked.
The fourth is image processing. According to the different needs of customers, directly through screen printing; Transfer the picture to the acrylic board, and then use vacuum suction to form it. There are people, animals or commodities in the picture, and they can also be blister to form a three-dimensional effect, so as to obtain better publicity effect.
operating characteristic
1. Bright colors, eye-catching effect and strong three-dimensional sense;
2. The content performance effect is lasting, resistant to high temperature and climate change;
3. It is not easy to deform and fade (generally it can keep color for 8- 10 years);
4. Good corrosion resistance;
5. Environmental protection;
technical characteristics
Technical characteristics of rolling light box:
1 cutting-edge technology, European and American synchronization, unlimited regular movement.
Electromechanical integration, the electronic part adopts high-precision sensing and positioning, the mechanical part adopts active and passive conversion, self-adjusting device, and the rotation is stable.
3 can accept the customization of non-standard specifications, and the size can be made at will from 40 cm× 80 cm to 5 m× 6 m.
4 sizes can be single-sided, double-sided or multi-sided models, and can also be rolled up and down or left and right according to requirements.
5 hanging, vertical and wall-mounted can be made according to needs.
Small and medium-sized publishing houses adopt compact structural design to minimize the overall weight and stabilize the structure.
Small and medium-sized joint parts adopt stainless steel rust-proof parts and are equipped with waterproof devices.
The shell material can be cold-rolled steel plate, stainless steel and aluminum alloy, and the color of the shell can also be made according to customer's requirements.
2-25 different advertising pictures can be displayed on the same light box in turn. Advertising pictures can be increased or decreased at will, which is convenient for replacement.
10 sets the automatic on-off program, which has the function of leakage protection.
FREQUENTLY ASKED QUESTIONS
Q: The lamp is damaged or scrapped. Can it be replaced?
A: Yes. Please contact our dealer and we will try our best to replace it for you at a cost-saving price.
Q: Can I buy products without frames?
A: Yes. Customers are welcome to purchase our light guide plate separately.
Q: What kind of lamps can be used?
A: All kinds of lamps are suitable for our light box. You can ask an advertising company to make it, and we can also provide you with the business of making light films.
Q: Can I choose other materials for the outer frame?
A: If the order reaches a certain quantity, we can replace the outer frame made of other materials according to the customer's needs, and of course the corresponding expenses will change accordingly.
Q: What is color temperature?
A: Color temperature refers to a kind of blue or red when the lamp emits light. If the color is red when it emits light, its color temperature is low (2500-3000K), showing a "warm" feeling; When the light is blue, the color temperature is high (4000-4500K), showing a "cold" feeling.
Q: What is the life of the lamp?
Answer: The service life of lamps refers to the 50% rejection rate of a certain number of similar lamps. This means that 50% of similar lamps will be scrapped before the service life, while the other 50% can still be used after the service life. The service life of lamps does not mean that each lamp can have the agreed service life.
Q: Are other types of ultra-thin light box in the market the same as those produced by your company?
A: Most ultra-thin light box light sources on the market use ordinary fluorescent tubes, and our company also produces ultra-thin light box with cold cathode tubes as light sources. The light box with cold cathode tube as light source is not inferior to other light sources, and it is more energy-saving.
Q: Do you have any samples?
A: There are samples, but generally speaking, you have to pay for a single sample, and these samples need personal information. Upon receipt of the purchase order, the sample payment will be deducted from the tax invoice.
Q: What is international standard paper?
Answer: ISO 2 16 of the International Organization for Standardization defines the international standard of paper size used by most countries in the world today, so it is called international standard paper.
Q: What is the definition and size of international standard paper?
Answer: According to the basic area of paper format, the format specifications are divided into A series, B series and C series. For example, the folio size of A0 is 841mm×1189mm, and the folio area is1m2; If A0 paper is split in two along the length direction, it becomes A 1 specification, and if A 1 paper is split in two along the length direction, it becomes A2 specification, and so on.
application area
1, wedding photography, home decoration painting;
2. Indoor and outdoor signs;
3. Large-scale exhibition projects or activities;
4, shopping malls, banks, hotels, hotels and other wall decoration publicity;
5. Advertising media such as airports, subways, stations and bus stops;
6. Craft gifts;
7. Move the billboard.
production process
The first step is to make a plastic suction mold.
Acrylic plate is formed by vacuum positioning and suction pressure. Even the same word with different sizes needs different molds, and the mold production requires high precision and good quality. Because the precision and quality of mold production itself are directly related to the quality of acrylic plastic light box, and the mold production technology is high, it needs experienced technicians.
Step 2: Production after molding
After the basic molding of acrylic plastic absorbing material, it needs to go through several processes, such as edge milling, router milling, polishing and so on. Finally, after the light source is laid and the paint is painted, the prototype of a blister light box is basically completed.
Step 3: process the pictures of the blister light box.
According to the different needs of customers, the screen is directly transferred to the acrylic board by screen printing, and then the advertisement image in the screen can be sucked again to achieve a three-dimensional effect, thus achieving a better advertisement effect.