Another thing is that your diamonds have not been cleaned for a long time. Pure natural diamonds have a certain degree of oil immersion, which is its unique attribute, so the diamond watch will not be as bright as before after a long time, so just send it for maintenance. I hope you are satisfied!
Question 2: What if the diamond ring doesn't shine? You can go to the place where the ring is sold, which is usually free, but if it is your diamond itself, there is no way. Good luck! ~
Question 3: How long has it been since the diamond ring you just bought glowed? What happened? Diamond cutting is very important. If the cutting is not good and it is not maintained, it will definitely not work. If you want to choose, choose the right brand and cut it after sale. Suggest channeling.
Question 4: What if the diamond doesn't shine? If the diamond doesn't shine, you can go to the place where you bought it for maintenance. If you don't want to run, soak the diamond in warm water at home, remember that it is warm water and then wash it with a soft brush and toothpaste. After washing, many diamonds will be very bright. It is eternal and will not expire.
Question 5: What should I do if the diamond ring fails? Is there any way to clean up at home? Generally, there is no charge for cleaning in the shop where diamond rings are bought. If you charge, you should first buy some necessities to clean the diamond ring at the same time, so as to ensure professional cleaning.
1. rapid soaking method-buy a set of gem cleaning solution and clean the diamonds according to the instructions.
2. Cold water soaking method-soak the diamond in the solution for about 30 minutes with half a cup of household Armenian water and the same amount of clean water, then wipe the inlaid metal around the diamond ornaments quietly with a small eraser, then gently wave it in the solution, and then rinse the water with paper after taking it out without washing.
3. Detergent bath method-first soak the diamond in a small dish of warm water mixed with mild detergent, then wash the diamond quietly with a small eraser, then put the diamond on the filter screen and wash it with warm water, and finally wash it with a cloth and dry it.
If the dust in the gap between the diamond and the inlay cannot be completely cleaned, you can use an electric tooth washer to wash off some dust, or use a wooden toothpick to carefully remove the dirt.
Although diamond cleaning is very nerve-racking, with the cleaning methods taught by experts, cleaning diamond rings at home can basically ensure the brilliance of diamonds. However, some professional jewelers need to stop care and maintenance to see if their inlay feet can still be consolidated, reliable and have any hooking phenomenon. To prevent diamonds from falling apart, the most important thing in diamond cleaning is to be careful during normal wearing, which is the most important thing.
Question 6: What if the platinum ring doesn't work? First of all, the platinum ring itself will not fade. The main reason why it turns black after wearing for a while is dirt. Then you should clean your platinum ring at this time. Clean platinum jewelry stores regularly. You can use jewelry cleaners sold in the market, or soak them in a solution of soap and warm water, and then gently wipe them with a soft cloth. Platinum ornaments inlaid with precious stones need to be cleaned once every six months. If there are scratches visible to the naked eye, or a natural oxide layer appears on the platinum surface, please take the platinum jewelry to a qualified jeweler for polishing. The scratches on platinum are only metal displacement, and the volume will not decrease. .
Question 7: Why doesn't the diamond ring shine when worn for a long time? Generally, the bright appearance of ordinary rings is plated with a layer. If it is silver plated, it can be wiped with alcohol. If the quality of the ring is a little better, the whole ring is integrated, that is, both inside and outside are made of a metal, and toothpaste can be used, but toothpaste will restore its brightness through grinding, that is, wear, so if it is not integrated or the coating is thin, it is best not to use this method. If it fails, you can only buy another one.
Question 8: What should I do if I find the diamond ring is not bright after it has been left for a long time? I can send it to the jewelry store for cleaning and polishing.
Question 9: What's wrong with the dull and foggy surface of the diamond ring? This is because the diamond ring has been worn on the hand for a long time, and the chromaticity of the diamond ring has decreased due to sweat stains, dust and other factors!
The following provides common maintenance methods for diamonds.
1, cleaning method of cleaning liquid
Fill a small bowl or teacup with warm water and mix a proper amount of neutral detergent in the water. Soak the diamond in water, brush it gently with a toothbrush, then wrap it with a sieve and rinse it with warm water under the tap. Finally, dry it with a soft cotton-free flannel.
2, cold water immersion method
In a small bowl or teacup, mix a proper amount of clean water with household Sakyamuni water, soak the diamond in the water for about 30 minutes, then gently brush the diamond in front, back, left and right with a small brush, then wave it in the water for a while, then take it out and dry it with a paper towel.
3. Quick cleaning method
Buy a bottle of brand-name jewelry cleaning solution, together with the attached container, and clean the diamonds according to the instructions.
Second, other skills to care for diamonds:
1, here are some tips to help you care for diamonds. When you are doing housework, please don't let the diamond jewelry be stained with chlorine bleach. Will not damage the diamond, but will make the inlay fade or discolor.
Don't wear diamonds when washing dishes or doing rough work. Although the diamond is hard, it may be scratched if it is struck hard according to its grain direction.
Question 10: What if the platinum ring doesn't work? Then wipe it with a soft cloth. Platinum ornaments inlaid with precious stones need to be cleaned once every six months. If there are scratches visible to the naked eye, or a natural oxide jewelry altar appears in the name of platinum, please take the platinum jewelry to a qualified jeweler for polishing. The scratches on platinum are only metal displacement, and the volume will not decrease. All free cleaning, electroplating and life-long maintenance for customers. Some people buy brand-new platinum rings, which are not as bright as others say. This is due to the application of a new technology called sandblasting. The sandblasting process is to partially sandblast the A surface of metal jewelry according to the design requirements, so that the polished surface of metal jewelry forms a sharp contrast and enhances the artistic beauty of jewelry lines. Please don't wear platinum ornaments when cleaning, gardening and other types of heavy work or physical exercise. When wearing platinum jewelry, please don't touch bleaching or * * * chemicals.