Question 1: How is the gold ring wrapped in red thread? Chart 1. First, prepare a main line (the main line demonstrated here is equivalent to an open loop).

Step 2 prepare for winding

3. Bend the winding as shown in Figure 3.

4, with the other end of the winding winding.

5. Don't press the wire when winding it.

6. Wear as shown in Figure 6.

7. Pull the winding on the right.

8. Cut the lines at both ends and finish.

Excerpt from I Love Diamond Net, official website.

Question 2: How to wrap the gold ring around the red line is like knitting a sweater, using the ring arm as a sweater needle.

Question 3: How is the gold ring wrapped with red rope? Don't tie the gold ring with red rope. Bad luck.

Wrap it with a green rope. Because gold and green complement each other. When gold is made very thin, it will reflect green light.

Gold and green are complementary colors, so be sure to tie a green rope.

It is unlucky to tie a red rope.

Adopt me, dear.

Question 4: How to weave the red rope on the ring into a jingyan.baidu/...2??

This is a tutorial, please have a look at it when you are free.

Question 5: Why do thousands of gold rings have to be wrapped around the red line? It is because people want to prevent the ring from being caught by something that they wrap it tightly. But now many places are wrapped in crystal thread, and there is nothing else to say.

The method of winding the red rope on the gold ring:

First: Fold the red line in half and press it on the ring where the red line needs to be wound, so that one end of the red line is disconnected and the other end is connected.

Second: Pick out a thread from the disconnected end, make a summary, and start winding the knotted thread around the connected end, round and round.

Third: After winding, thread the wound thread into one end of the connection, then pull the remaining thread at the other end, and you will find that the connected end will shrink. Finally, pull the wound thread into your winding circle, and then cut off the remaining thread with scissors.

Question 6: How to wrap the red rope around a ring? It is generally seen that someone will wrap a red rope around the ring, mainly because the ring is relatively large and can be wrapped with a red line to prevent it from slipping. The ring is a kind of decorative jewelry worn on the finger, which must be carefully cared for by the chicken to maintain its brilliant luster. Cleaning of the ring:

1. Fill a small bowl or teacup with warm water and mix a proper amount of neutral detergent in the water.

2. Soak the diamond in water, brush it gently with a toothbrush, then wrap it with a sieve and rinse it with warm water under the tap.

3. Finally, dry it with soft cotton-free flannel.

If you wash it by hand, you'd better remove the ring, because the washing process will be longer and washing powder will be used. Corrosive. The ring is the easiest to wear in jewelry, and it is best to take it off when doing heavy work. When there is dirt, you can gently wipe it with toothpaste and it will be as clean as new.

Question 7: How is the gold ring wrapped with red rope? How many times does the red rope circle?

Then burn the head and tail with fire.

Press on the coil.

Otherwise it will slip away.

Question 8: Why is the gold ring wrapped with red rope? Not easy to deform! Or just opening your mouth is not easy to be scratched by clothes! Hard things don't fall off easily!

Question 9: Does the red rope around the gold ring affect the ring? Very influential. Generally, gold rings don't include red rope, which will make gold look dim. Generally, gold thread is worn on red rope, which is very auspicious. You will be as rich as an enemy! !