Current location - Plastic Surgery and Aesthetics Network - Jewelry brand - Pendant buckle rope weaving method
Pendant buckle rope weaving method
The knitting method of pendant buckle is introduced as follows:

1, tie a knot, prepare a rope, black or red or blue, twist the rope into a thin thread, and put both ends in the jade pendant. Cut the rope to a suitable size, align the two ends, and tie a knot at the hole of the jade pendant to fix it.

Press one end of the rope on the other end and tie the knot back and forth until it is full. Generally, two or four knots are enough.

2, winding, prepare two main lines, the color according to their own preferences, the main line through the pendant mouth, the other line to wind, reserve a wire sleeve at the corner, and finally wind it to your favorite length, and then tighten the wire sleeve.

3, braided rope, divided into eight braided ropes or three braided ropes, prepare two ropes, pass through the pendant, weave in turn, and tie a knot at the end, which is simple and convenient.

Conclusion: Different rope weaving methods bring different experience effects, which I hope will be helpful to everyone.

Method 2:

Weaving pendant lanyards involves many steps, and the following are the detailed operation methods:

1. Preparation tools: lighters and jewelry lines or ordinary jade lines. The jewelry line here is suitable for small pendants, because its holes are generally small; The jade line is thicker.

2. Start knitting: pass the rope through the front of the pendant, and pay attention to leave a certain distance after passing. The length can be reserved according to actual needs.

3. Weaving: Take the place where the jewelry lines cross as the main line, and start weaving flat knots with jade lines. After tying the flat knot, cut off both ends of the jade thread and burn it with a lighter.

4. Repeat adjustment: pull the two ends of the jewelry line to both sides, cut off the excess line after pulling to the end, and light it with a lighter to fix it. If necessary, reverse knitting can be carried out according to the distance reserved in advance until the expected length is reached.

5. End: After the weaving is completed, the redundant thread ends can be burned and fixed with fire, thus completing the weaving of the pendant.