1. Bonded jadeite refers to jadeite that has been artificially optimized. Glue-injected jadeite is to dissolve impurities and rust spots in jadeite with extremely low grade, no appearance and extremely low value with chemical acid.

Jade is one of the ornaments worth exploring. There is a kind of jade called rubber jade, which seems to maintain the stony characteristics of jade compared with the super transparency, clear light and strong glass luster of crystal. Compared with Hetian jade, which is slightly transparent and moist, it has a strong transparent structure and light sense.

3. Due to the loose structure, the jadeite washed by strong acid will be filled with glue and then processed. With the improvement of technology, the polished glue-injected jadeite looks little different from the natural A jadeite, which is easy to be confused. This is the so-called jade glue injection.

4. Jade glue injection is an optimized fake jade. Glue-injected jadeite is made by cleaning jadeite with strong acid, and then injecting glue to fill the cracks. Glued jadeite can see green lines under strong light, and some can't see the lines clearly but are turbid, and the luster is still very poor.

5. Glued jadeite is not naturally formed. Instead, when the raw materials of the bracelet are poor in texture, the dirty things in the jade are first dissolved with strong acid, then bleached, and finally glue is injected into the gap to make the bracelet more transparent.

What's the difference between injecting glue into jade and injecting glue into Shu Zulai?

1. The difference between Shuzulai Glue Injection and Yuhua Glue Injection: Shuzulai Glue Injection is to soak Shuzulai in strong acid, remove impurities contained in it, and inject colloid into Shuzulai, so that the texture of Shuzulai becomes delicate and perfect.

2. Compared with jadeite with glue injection and without glue injection, their glossiness will be different. Generally speaking, the surface luster of jadeite without glue injection is strong glass luster, and the luster is relatively bright. Glued jadeite is dull and looks like wax or resin luster.

3. The difference between Shu Zulai's glue injection and Yuhua's lies in the material and use. Shuzulai injection glue is a kind of medical injection glue, which is mainly composed of polyethylene glycol and polyacrylate. It is used to fill soft tissue defects and repair soft tissue structures, and has good biocompatibility and biodegradability.

4, the light transmission effect is different: there will be pits on the surface of jade, and the structure inside can be seen to be scattered by light transmission observation. The jadeite without glue injection will not have acid etching lines. Transparent observation shows that the structure inside is clear, orderly and dense, and looks brighter.

5. Glue injection means washing with strong acid, and then filling the gap with glue injection. Jade means translucent. Playing with hands and body for a long time has become as transparent as jade, showing a jade texture.

How is jadeite injected with glue?

1. Two stages of jadeite bleaching and glue injection. The first stage is bleaching, also known as yellowing, that is, the original jadeite stone that has been cut into pieces or the jadeite that has been polished is removed by chemical treatment (which may be caused by filling cracks with iron compounds). The second stage is to inject human polymers and even add green pigments.

2. Glued jadeite, also known as jadeite B, is made by the following steps: selecting materials. Generally, raw materials with loose structure and relatively large grains will be selected. Pickling and soaking in hydrochloric acid, usually about 2-3 weeks. Alkali washing enlarged the gap. Etching again with alkaline aqueous solution. Glue filling.

3. After the brown color between cracks or particle structures in the original stone is basically removed, there will be some pores, and the cracks will be more clearly visible, so of course, it cannot be sold directly, just adding polymer, which is collectively called glue injection.

4. The original jadeite stone is glued. Glue injection is one of the most commonly used processes for processing jadeite B and C goods. Because of the loose structure, the jadeite which is strongly pickled will be filled with glue and then processed.

5. irradiate jadeite with purple light. If there is a strong fluorescence reaction, it is injected with jade. Boil jadeite in cold water until it boils, and the texture becomes turbid and even the color becomes pale. Observing the surface structure with a magnifying glass, the structure is irregular, and there are more jadeite injected in the fracture.

6. This is the so-called jade glue injection. Identification method of glue-injected jadeite: gloss change: after being soaked in strong acid and alkali, jadeite has loose structure, and there are dissolved pits on the surface before filling, which makes it spread and its luster weaken.

Why does jadeite stick? Why does jadeite stick?

1. Due to loose structure, jadeite washed by strong acid will be filled with glue for further processing. With the improvement of technology, the polished glue-injected jadeite looks little different from the natural A jadeite, which is easy to be confused. This is the so-called jade glue injection.

It is worth reminding that these encapsulated jadeites will cause health hazards if worn for a long time.

3. Jade glue injection is an optimized fake jade. Glue-injected jadeite is made by cleaning jadeite with strong acid, and then injecting glue to fill the cracks. Glued jadeite can see green lines under strong light, and some can't see the lines clearly but are turbid, and the luster is still very poor.

4. Glued jadeite is not naturally formed. Instead, when the raw materials of the bracelet are poor in texture, the dirty things in the jade are first dissolved with strong acid, then bleached, and finally glue is injected into the gap to make the bracelet more transparent.

5. Bonding jadeite is one of the processing technologies of jadeite B and C goods. Glue injection is a method to optimize jadeite, and it can be said to be a fake method in serious cases. The value of jadeite generally depends on five aspects: species, water, color, shape and workmanship, but there is a premise here that it is natural.

6. Bonded jadeite refers to jadeite that has been artificially optimized. Glue-injected jadeite is to dissolve impurities and rust spots in jadeite with extremely low grade, no appearance and extremely low value with chemical acid.

How to inject glue into jadeite

1. Two stages of jadeite bleaching and glue injection. The first stage is bleaching, also known as yellowing, that is, the original jadeite stone that has been cut into pieces or the jadeite that has been polished is removed by chemical treatment (which may be caused by filling cracks with iron compounds). The second stage is to inject human polymers and even add green pigments.

2. Generally, the transparent resin is injected by the method of vacuum negative pressure. The refractive index of this resin is close to that of jade. After polishing, it is almost no different from high-grade jade. If colorant is added during filling, it is called B+C jadeite. Therefore, the objects of bleaching and filling treatment are generally middle and low-grade jewelry and blanks.

3. Then the injected glue is mainly wax or resin to fill the pores and cracks, which makes the jadeite more firm. Some dyes and polymers are injected together to make the treated jadeite both firm and colorful. The original jadeite stone is injected with glue. Glue injection is one of the most commonly used processes for processing jadeite B and C goods.

4. irradiate jadeite with purple light. If there is a strong fluorescence reaction, it is injected with jade. Boil jadeite in cold water until it boils, and the texture becomes turbid and even the color becomes pale. Observing the surface structure with a magnifying glass, the structure is irregular, and there are more jadeite injected in the fracture.

5. How to interpret the answer will be more accurate. It can be said that glue injection is not uncommon in jewelry and jade circle, and it is also one of the most commonly used jade B and C processing technologies. Because of the loose structure, the jadeite which is strongly pickled will be filled with glue and then processed.

6. Jade glue injection is an optimized fake jade. Glue-injected jadeite is made by cleaning jadeite with strong acid, and then injecting glue to fill the cracks. Glued jadeite can see green lines under strong light, and some can't see the lines clearly but are turbid, and the luster is still very poor.