10 1 glue can be used to bond materials such as steel, nonferrous metals, ceramics, glass, wood, leather shoes, soft plastics, hard plastics and rubber products. If it is necessary to bond polyethylene, polytetrafluoroethylene, polypropylene and other materials, it needs special treatment to exert its viscosity. 10 1 glue is similar to 502 glue, both of which are cyanoacrylate glue. Under the catalysis of a small amount of water in the air, polyaddition reaction can occur, which can quickly solidify and firmly adhere to the adherend.
Second, what are the precautions for using 10 1 glue?
1, pay attention to the cleanliness of the surface.
Before using waterproof glue, the dust and dirt on the construction surface must be cleaned up, and no water stains should be left on the surface of the object. This is also an important method to ensure waterproof effect when using waterproof glue.
2. Pay attention to the thickness of the glue.
In the construction process, the thickness of colloidal glue is the factor that affects the waterproof effect of waterproof glue. If the glue is too thin, the colloid will fall off and leak in future use. If you glue, it will not only affect the appearance, but also increase the drying time of the colloid, which is easy to be damaged. In the subsequent drying process. Therefore, it is scientific to ensure that the thickness of colloid is 2mm-3mm when pasting, which can meet the sealing, caulking and waterproof requirements of most different materials and different scenes.
3. Pay attention to the drying time
Be sure to pay attention to the drying time after applying waterproof glue. Different types of adhesives and different manufacturers need different drying times. So be sure to watch it before using some kind of waterproof glue. The safe drying time range of this glue is generally 3-7 days, which is the drying time required by ordinary waterproof glue. In the meantime, please don't touch waterproof glue with your hands or other hard solids after construction.
10 1 glue can be used to bond steel, nonferrous metals, ceramics, glass, wood, leather shoes, soft plastics, hard plastics and rubber products. If it is necessary to bond polyethylene, polytetrafluoroethylene, polypropylene and other materials, special treatment is needed to give full play to their viscosity.