Professional vocabulary about quality?

(1) quality management vocabulary

Electronic Commerce: Electronic Commerce/Electronic Commerce Services

It is estimated that your EC energy is the EC of 2002/95/EC, which means instruction.

CAPA: Corrective Action and Preventive Action/Corrective and Preventive Measures

CLCA: Correction closed-loop action correction cycle (correction and prevention)

GP: Green Partner, Green Product Green Partner, Green Product (RoHS)

TVR: Tool Verification Report Mold Verification Report

QRR: Quality Rejection Request

P/L: packing list

⑵ Quality terms, I saw a lot of help on the Internet, send it again.

First, the clarity FL is flawless. If there is no defect inside and the surface is slightly defective, VVS 1. VVS2 contains tiny inclusions (tiny defects invisible to the naked eye) VS 1. VS2。 Contains tiny inclusions (tiny defects invisible to naked eyes) SI 1. SI2。 Small inclusions (invisible to the naked eye) I 65438. G, H, I and J belong to the near colorless range; K, l and m are yellowish; Below N, diamonds are rated as light yellow-diamonds are known as the "king of gems" in the world because of their highest hardness, crystal clear texture and dazzling features. It symbolizes success, elegance, loyalty, eternity and innocence, so it is deeply loved by people. At present, diamond is the most traded gem in the world jewelry trade. Since the advent of portable detection instruments such as thermal conductivity meter, it has become a very simple matter to identify the authenticity of diamonds, but how to evaluate the quality of a diamond has become the main problem in diamond trade. According to the latest national standard GB/T 16554- 1996, there are four factors to evaluate the diamond grade, namely, color, clarity, cut and carat weight. These four factors are also called "4C" criteria. "4C" is the first letter C in four English terms: color, clarity, cut and carat weight. 4C is an indispensable comprehensive factor to evaluate the quality of a diamond, and it is also a measure for consumers to judge the value of a diamond. There are all kinds of diamonds in the jewelry market, including pure natural diamonds and irradiated and filled diamonds. There are white diamonds (actually colorless with white characters on a white background), yellow diamonds, and red, green, blue and orange colored diamond. From the shape, there are standard round diamonds, as well as heart-shaped, oval and pear-shaped diamonds. The most common diamonds in the market are white (colorless) standard round diamonds, so in the "4C" standard, the classification of diamond color, clarity and carat weight only refers to the classification of natural white (colorless) to light yellow (brown, gray) series polished diamonds with carat weight greater than 0.2, while the cutting classification only refers to standard round diamonds or white (colorless) to light yellow (. The "4C" standard is not applicable to the classification of colored diamonds, irradiated diamonds and filled diamonds. In the "4C" standard, the color of diamonds is divided into 12 grades. The grading method is: the pure colorless diamond is defined as the highest color pole-extremely white, 100 color, which is expressed by D, and can also be written as D( 100). With the increase of the yellow component of diamonds, the color grades gradually decreased to E(99), F(9), G(97) and H(96). In the diamond appraisal certificate, the color grade is usually expressed only by English letters. When the color grade is lower than n, it is generally considered that the diamond is no longer suitable for cooperative jewelry. The color grading of diamonds is determined by professional technicians who compare the diamonds to be graded with standard colorimetric stones repeatedly in the grading environment of specified standards. Or use a colorimeter to scan the diamonds to be classified in the visible range, and then determine them through a series of technical analysis and processing; The purity of a diamond is its purity. The higher the purity of a diamond, the less impurities, defects or flaws there are, and vice versa. Objectively speaking, flawless diamonds are rare. According to the standard, carefully observe the internal and surface defects of the diamond to be graded with a magnifying glass of 10 times. Under this condition, the clarity of diamonds can be divided into five grades: flawless LC, extremely defective VVS, slightly defective VS, defective SI and severely defective P, and further subdivided into sub-grades 10, namely LC, VVS 1, VVS2, SI 1, SI2 and P. Diamond cutting refers to the proportion and decoration degree of cut diamonds, which is an index directly influenced by human factors in 4C standard. The brilliance of diamond is attributed to its unique high refractive index and high dispersion (commonly known as "fire color &; Rdquo, only excellent and proportional cutters can fully reflect the incident light and show the unique luster, brilliance and flash of diamonds to the maximum extent. If the cutting is rough and out of proportion, there will be "light leakage". Even if the color and clarity of diamonds are good, they can't have good light, and their value is still low. The simple way for consumers to judge the cutting quality is to pick up the diamond and stare at the shining light on the top of the diamond. If there are not many colors, the cutting is not ideal. According to the standard, cutting is divided into three grades: very good, good and average; The unit of mass (commonly known as weight) of diamonds is grams, but "carat" is still used as the unit of mass (weight) of diamonds in international diamond trade. 1 carat = 200mg = 0.2g. 1 carat is divided into 100 parts, and each part is called10.8. When the color pole, clarity and cutting conditions are similar, with the increase of diamond weight, its value increases geometrically. Consumers should choose diamonds of suitable size according to their hobbies and actual conditions. The Belgian Diamond High Council is officially recognized as representing the Belgian diamond trading industry. Its headquarters is located in Antwerp, the world diamond center. HRD diamond color certificate focuses on the detailed characteristics that determine the value of colored diamond, such as color description, color design and luminescence. It plays an important role in detecting whether diamonds are natural colored diamond or imitation diamonds. Diamond certificate number (laboratory report: date of diamond identification certificate number): date of diamond identification; Diamond shape and cutting: mainly describe the shape and cutting method of diamond; Diamond size and carat weight, in millimeters. Describe the total depth of diamond carat weight, accurate to about one percent: table width height of diamond (round or colored diamond) relative to diameter: table height of diamond (round or colored diamond) relative to diameter: height of diamond (round or colored diamond) relative to diameter. The depth of the pavilion in the crown: the symmetry of the diamond (round or colored diamond) pavilion relative to the diameter: the symmetry grade of the diamond; Ring thickness: the thickness of diamond circumference; Sharpening: Polishing of the bottom sharp surface. Clarity grade of polished diamond: the clarity grade of diamond under 10 times magnifying glass. Clarity structure diagram: a display diagram observed under a magnifying glass, which describes the shape of a diamond and the characteristics and position of its inclusions. Color grade: fluorescence of diamond: visible light emitted by diamond under ultraviolet light Comments: Yes.

(3) What is the technical term of quality management?

3 manufacturing production manufacturing control

3- 1 DL is in charge of direct labor.

3-2 IDL indirect labor indirect labor

3-3 DLH direct labor time direct working time

3-4 Proctivity=UTS/DLH

3-5 pieces per hour

3-6 Efficiency = Actual/Target (%)

3-7 minutes machine downtime

3-8 AI Auto Insert Auto Insert

3-9 MI Manual insertion Manual insertion

3- 10SMD surface mount device surface adhesive component

Surface bonding technology in SMT surface mounting technology

3- 1 1 b/i is burned in a combustion machine (at what temperature and for how many hours).

3- 12 equipment utilization rate

3- 13 Work Description of Work Instruction

3- 14 SOP standard operating procedures operating instructions

3- 15 R/I running machine

3- 16 ESD electrostatic discharge

mass production

EMC electromagnetic compatibility

3- 19 EMI electromagnetic interference, electromagnetic interference

3- 19 sir surface impedance resistance surface impedance test

4 engineering project

4- 1 PE product engineer; Product engineering process engineer process engineering

4-2 TE test engineer test project

4-3 ME manufacturing engineer; Manufacturing engineering mechanical engineer mechanical engineering

4-4 Industrial Engineer Industrial Engineering

4-5 DCC Document Control Center Document Management Center

4-6 BOM bill of materials bill of materials

4-7 ECN engineering change notice engineering change announcement

4-8 Tecn Temporary Engineering Change Notice Project Temporary Change Announcement

4-9 aty Assembly Test Yield Total Yield First Pass Yield

4- 10 Total Productive Maintenance Total Productive Maintenance

4- 1 1 PM proct manager; Project manager, product manager; Project manager

4- 12 ECR engineering change request engineering change application

4- 13 ecological engineering change order engineering change description

4- 14 EN engineering notice engineering notice

4- 15 wps work program table operation instructions

4- 16 ICT circuit test circuit test

4- 17 P/R trial operation; C/R control operation; T/R trial operation

4- 18 EVT engineer verification test engineering verification test

4- 19 DVT design verification test

4-20 MVT Multiple Verification Test Multiple Verification Test

4-2 1 Ongoing reliability test-Shipment reliability test

4-22 softwares

4-23 hardware

4-24 ear engineering analysis request engineering analysis requirements

4-25 ECE engineering change assessment engineering change assessment

4-26 ECC engineering change cancellation engineering change cancellation

4-27 IEM Internal Engineering Memo of Meno Internal Engineering

4-28 PAS Parts Approval Form Parts Confirmation

4-29 DAB daily action Boaed daily work billboard

4-30 TMR tool modification report modification agreement

4-3 1 CRT control operation test trial production test

4-32 DCD Design Change Description Design Change Notice

4-33 ESR Engineering Research Report Engineering Research Report

4-34 EI Engineering Information Engineering Information

4-35 PMP Process Management Plan Process Control Plan

4-36 Management by objectives

4-37 KPI Key Performance Indicators Key Performance Indicators

4-38 PIP Parts Inspection Plan Parts Inspection Standard

4-39 CTF Key Functions Key Dimensions

4-40 CTA Key Components Key Dimensions

4-4 1 R & amp； Research and development

Repeatability and reproducibility of 4-42g R gauge Verification of repeatability and reproducibility of fixture.

4-43 Cpk process capability index

4-44 FAI First Piece Inspection First Piece List

5 QA quality assurance quality assurance

QRA quality and service company. Reliability guarantee quality and reliability guarantee

5- 1 MQA Manufacturing Quality Assurance Manufacturing Quality Assurance

5-2 DQA Design Quality Assurance

5-3 Quality Control Quality Control

5-4 IQC Yining Quality Control Procurement Quality Control

5-5 VQC Supplier Quality Control Sales Quality Control

5-6 IPQC process quality control in process quality control

5-7 OQA Outgoing Quality Control Delivery Quality Control

5-8 QE Quality Engineer Quality Engineering

5-9 AQL acceptable quality level acceptable quality level

5- 10 DPPM Number of defective parts per million units Number of damaged parts

5 parts per million-11

5- 12 customer service customer service

5- 13 MRB material review Committee material review Committee

5- 14 DMR defect material report material defect report

5- 15 RMA return management material recovery processing

5- 16 life test life test

5- 17 T/C temperature cycle temperature cycle

5- 18 h/t high temperature test

5- 19 liter/ton low temperature test low temperature test

(4) Technical terms related to quality inspection.

Extremely difficult

5] What does the quality management term mcp mean?

MP: It is a streaming media network technology. It is the next generation network platform that can provide multimedia services. Its core is video streaming media plus ultra-wideband network.

CP: the abbreviation of Content Provider, which is a mobile data service content provider or a mobile value-added service content provider. It differs from SP in that SP is more closely involved in the operation directly, while CP is not directly involved.

SP: the abbreviation of service provider, which means service provider, especially the service and content provider of mobile phone network. SP refers to the direct provider of mobile Internet service content application services, and is responsible for developing and providing services suitable for mobile phone users according to users' requirements.

Si: the abbreviation of service integrator, which is the abbreviation of service integrator defined by China Mobile. As a certified partner of China Mobile, it helps China Mobile to provide group products and functional services to group customers and their target customers. SI is responsible for all or part of customer channels, product integration and service operation in this process.

Mcp: the abbreviation of Microsoft certified professionals, which means Microsoft certified experts, is recognized as a global computer software senior talent certification.

[6] What are quality terms?

The following are some practical quality working English terms. See if there is anything you are looking for. I hope it works for you.

Simple and Practical Terms of High-quality Working English

1, quality personnel name category [/b]

QC quality control quality management personnel

FQC final quality control terminal quality control personnel

IPQC quality control personnel in the process of quality control

Output quality control final shipment quality controller

IQC yining quality control feed quality controller

total quality control (TQC)

Inspector of POC channel quality control department

Quality assurance personnel

OQA output quality assurance is delivered to quality assurance personnel.

QE quality engineering quality engineer

[b]2。 Quality assurance category [/b]

FAI First Piece Inspection First Piece Inspection of New Products

Federal Aviation Administration first article guarantee first article confirmation

TVR Tool Verification Report Mold Confirmation Report

3B 3B Confirm before the mold is put into production.

Ability index

CPK capability index of process capability parameters of process die

Quality evaluation of ssqa qualified suppliers Standardize supplier quality.

OOBA unpacking audit unpacking inspection

QFD Quality Function Deployment Quality Function Deployment

FMEA Failure Mode Validity * * * YSIS Failure Mode Analysis

8 majors and 8 replies

The last audit of FA final audit

Automobile corrective action request corrective action request

Corrective action report

[b]3。 FQC operation class

Acceptable quality level of AQL operation class

Sample size sampling inspection sample size

ACC accept accept

Free rejection was rejected.

CR criticality is extremely serious.

major

MIN Minor slight

AOQ average output quality average factory quality

Average output quality level average factory quality

Quality/reliability/service quality/reliable service

Military standard military standard

Special I- special IV special sampling level grade

Part number item

L/N batch number special mining

AOD acceptance deviation

UAI uses it as the first inspection report.

One millionth of FPIR first article inspection report

parts per million

Quality control specialty of process statistics

statistical process control

SQC statistical quality control

R range, full range

Full-range average of average range

UCL central upper limit control upper limit

Lower limit of LCL central lower limit control

Maximum value

Minimum, minimum and minimum

Repeatability and safety of GRR manometer. Repeatability and repeatability of repetitive measuring tools determine whether the quantity is reliable.

Size dimension

Diameter diameter

Frequency frequency

N $ NUMBER samples

[b]4。 Other quality terms [/b]

QCC quality control circle

QIT quality improvement group quality improvement group

PDCA Plan Implementation Inspection Summary of Action Plan Implementation Inspection

ZD zero defect

QI quality improvement quality improvement

QP quality policy objective policy

total quality control (TQC)

MRB Material Rejection Doc Return Doc

LQL limits the quality level to the minimum quality level.

RMA material return audit material return approval

QAN Quality Improvement Rate Notifies Quality Improvement Activities

ADM absolute size measurement full size measurement

Quality objective

7 QC tools 7 quality control tools 7 quality control technologies

[b]5。 Common parts [/b]

Engineering change notice engineering change notice (supplier)

ECO Engineering Change Order Engineering Change Requirements (Customer)

PCN process change notice operation change notice

PMP production management plan production control plan

SIP specification in process inspection specification

SOP standard operating procedure manufacturing operation specification

Is the inspection specification a finished product inspection specification?

Bill of materials bill of materials

PS packaging specifications packaging specifications

Specifications

What was the technical term of QC?

QC is the abbreviation of English quality control, and Chinese is "quality control". There are too many technical terms in QC, and the space is limited. Only some commonly used ones were selected:

Measurement system analysis measurement system analysis

LCL: lower control limit

control plan

Correction correction

cut the cost

Customer service customer center

Data data

Data collection data collection

Description description

Equipment device

digital

carry out

Experimental design

Environment environment

Equipment equipment

FMEA: Failure Mode and Effect * * * YSIS Failure Mode and Effect Analysis

FA: Failure analysis of defective products

Final quality assurance final quality assurance

FQC: Final Quality Control Final Quality Control

measuring system

Grade grade

inductor

improve

Inspection inspection

IPQC: process quality control

IQC: quality control, incoming material quality control

Iso: international organization for standardization

Quality control of LQC: production line quality control production line

LSL: lower limit of size and specification

Material material

Measurement measurement

incidence rate

job instruction

institutional framework

Parameter parameter

Parts parts

Pulse pulse

Policy guidelines

Process process

workpiece process

Proct products

Product production

Program schema

Project project

Quality assurance quality assurance

Quality control quality control

QE: Quality Engineering Quality Engineering

QFD: Quality Function Design Quality Function Deployment

Quality quality

quality manual

quality policy

Demand requirement

Residual error

Response response

Responsibility responsibility

Review review

Rework rework

Rolling yield First pass yield

Sample sampling

Scrap waste

OP: standard operating procedure standard operating book

statistical process control

Specifications

SQA: Source (Supplier) Quality Assurance Supplier Quality Assurance

Taguchi method

total quality control

total quality control (TQC)

traceability

UCL: Control Upper Limit Control Upper Limit

USL: upper limit of size and upper limit of specification

Verification confirmation

Variable measurement value

Verification verification

Version version

QCC quality control circle

Quality management circle

PDCA Plan Implementation Inspection Summary of Action Plan Implementation Inspection

Core value (core value)

Inspector of channel quality control section

Quality assurance personnel

OQA output quality assurance is delivered to quality assurance personnel.

QE quality engineering quality engineer

FAI First Piece Inspection First Piece Inspection of New Products

Federal Aviation Administration first article guarantee first article confirmation

Ability index

Quality evaluation of qualified suppliers in ssqa standardized supplier quality audit

FMEA Failure Mode Validity * * * YSIS Failure Mode Analysis

Acceptable quality level of AQL operation class

Sample size sampling inspection sample size

ACC accept accept

Free rejection was rejected.

CR criticality is extremely serious.

major

MIN Minor slight

Quality/reliability/service quality/reliability/service

Part number item

Letter of credit batch number

AOD acceptance deviation

QIT quality improvement group quality improvement group

ZD zero defect

QI quality improvement quality improvement

QP quality policy objective policy

PCN process change notice operation change notice

PMP production management plan production control plan

Standard inspection procedure

SOP standard operating procedure manufacturing operation specification

Is the inspection specification a finished product inspection specification?

Bill of materials bill of materials

PS packaging specifications packaging specifications

Specifications

DWG drawing system file class

engineering specification

IWS international worker standard process standard

Iso international organization for standardization

GS general specification general specification category

PMC protection and development company. Material control production and material control

Production control center

PPC production planning control

Material control

Document control center data control center

QE Quality Engineering Quality Engineering (Department)

Quality assurance quality assurance office

Quality Control Quality Control (Course)

Production department

Laboratory, laboratory, laboratory

industrial engineering

R& research and development. Design and development department

……

What words are used to describe product quality?

First, the words used to describe product quality are exquisite, reliable, reliable, rough, meticulous, reliable, solid, rough, rough, rough, rough, accurate and exquisite.

Second, the basic definition of quality:

Pinyin: pǐn zhi

1 refers to the essence of people's behavior and style, such as thought, character and understanding.

2. The quality of things.

Third, related vocabulary analysis.

1, exquisite

[Jiang Qiao]

Exquisite and ingenious (craft, utensil structure, etc.). ): This painting is ingenious in conception and exquisite in brushwork, which has won unanimous praise from the judges.

2, reliable

[kkào]

His behavior shows that he is an honest and reliable person.

3, reliable

[test p incarnation]

Northern dialect, post-modern popular vocabulary. I don't know much about music, so sometimes I'm unreliable and sometimes I'm out of tune.

4, rough

[Cao Yao]

Rough; Careless: I don't know much about music, so sometimes it's unreliable and sometimes it's out of tune: this craft is too rough.

5, meticulous

[xìzhi]

Fine and meticulous: mahogany furniture is favored by many people because of its hard texture and meticulous workmanship.