2, 100mm*0.5mm needle length 100mm thick, about 0.5mm pinhole can only wear a line below 0.35mm (2mm rice can be worn).
3, 55mm*0.4mm needle length 55mm thick about 0.45mm pinhole can only wear less than 0.35 mm. ..
Question 2: How to use beads and how to use the 9-character needle: 1. Thread the 9-pin through the bead. 2. Twist the other end of the 9-needle into a circle with needle-nosed pliers. 3. Adjust the angle again. Usage per lap: 1. Pull a single circle in a staggered shape with needle-nosed pliers. 2. The staggered bending method is correct. Usage of bead plug: 1, bead plug and bead. 2. Adjust the positioning beads and beads to proper positions, and flatten the front and rear positioning beads with needle-nosed pliers to fix the position of the beads. Usage of mobile phone lock: 1, fasten the line through the mobile phone lock. 2. Thread the wire through the other end of the phone lock and lock it. How to use T-pin: 1 Thread the beads into the T-pin. 2. Bend the T-pin with needle-nosed pliers.
Question 3: Wan Wen beading needle is not easy to use video needle! Learn to wear fishing line ~
Question 4: The difference between a beaded needle and a beaded needle is that the beaded needle is generally longer and the nose of the beaded needle is larger.
Question 5: Where did you buy the beaded needle? Taobao 10 bought it.
Question 6: Hand beading With the rapid development of DIY beading, more and more people like DIY now. But for beginners, it may be difficult to get in touch at first, and they don't know where to start when purchasing materials. So, I wrote a beginner's information here, hoping to help you.
Before making a beautiful DD, you must have a set of tools. How else can we start?
Basic tools:
Scissors: used to cut some thin wires. Ordinary scissors can't be used to cut steel rings (such as rings and gongs). ).
Round nose pliers: used for winding beautiful circles, generally used for 9-pin, T-pin, buckle and so on.
Needle-nosed pliers: It can be used to flatten positioning beads, straighten bent threads or needles, and of course there are other uses. This is waiting for you to practice slowly.
Tweezers: used to clamp some small accessories, especially when sticking diamonds or small things.
Scissors: used to cut thread and rope, etc.
Art knife: It's not absolutely necessary, but it's best to be prepared. Things like soft pottery can be reprocessed later, and can be adjusted at any time with a utility knife, which is more convenient to use when making.
Glue: If it is not sticky, it doesn't matter if you don't prepare it. Glue can be divided into AB glue, quick-drying glue and heat-sensitive glue.
Among them, AB glue is used to paste diamonds and the like, and the paste effect is better.
Quick-drying adhesives are generally used for auxiliary purposes. It is brittle after drying and is not suitable for sticking diamonds. The edge is white when it sticks. I usually use it as a primer.
Hot glue is suitable for sticking cloth. There is also a hot glue gun, which is used with hot glue. The adhesive tape can be heated by fire and reused, but it will make the glue black. Therefore, if the requirements are high, it is best to use a glue gun.
Beaded needle: used for beading, some threads are soft, so it will be more difficult to use them directly, so it is necessary to use beaded needles at this time.
Storage box: Strictly speaking, this should not be regarded as a tool, nor is it necessary. However, if you like to keep things in order, it is also good to have a few small accessories, so you don't have to look around when you need them.
All the tools are ready, so let's mix the materials.
Materials are divided into basic accessories, targeted basic accessories and characteristic accessories.
Basic accessories: Basic accessories refer to the most commonly used ones.
Single ring: it is also called O-ring and C-ring, but its use is the same, and there are many models, usually 4 mm and 6 mm, which play the role of connecting two accessories;
T-pin: Like his name, it's T-shaped, with a needle at one end and a flat at the other. It has many specifications. Commonly used lengths are 2.2 cm, 2.8 cm, 3.5 cm, the thickness is generally 0.7mm, and ultra-fine ones are also 0.4 mm, which are generally used at the bottom. Beads are strung on it and hung on the bottom of jewelry.
9 stitches: 9-shaped, with one round end and the other sharp end, with various specifications. Commonly used lengths are 2.2cm, 2.8cm and 3.5cm, and the thickness is generally 0.7mm, and ultra-fine ones are also 0.4 mm. Generally, after beads or other accessories are strung in the middle, the other end is also wound into a circle, and other accessories can be connected up and down.
Fishing line: a kind of transparent line, which is strong and not easy to break, but it needs special attention when knotting, because the surface of fishing line is smooth, and it is easier to loosen if the knot is not good. Generally suitable for accessories to wrap buttons and positioning beads. Fishing line is mainly used for pattern beading.
Elastic thread: the fish that escaped the net before. Elastic thread can be divided into fish elastic thread (also called crystal elastic thread) and ordinary elastic thread.
Elastic line of fishing line: completely transparent and round, similar to fishing line, but more elastic than fishing line. This elastic thread is average in elasticity, but it is not easy to break.
Ordinary elastic thread: solid color, flat, composed of many thin lines. Relatively speaking, this elastic thread has good elasticity, but because it is composed of many thin threads, it often rubs with beads for a long time and is easy to break, especially the strung crystals and glass.
Cotton thread: The cotton thread written here is the same type of thread including nylon, cotton thread, cotton thread and nylon thread. At present, this kind of thread is not widely used in beading, but it has its own unique side, which is irreplaceable by other threads. This kind of thread is soft and suitable for making beaded ornaments that need to show drape, but this effect is beyond the reach of elastic thread and fishing line.
Buckle: it plays a connecting role in jewelry and is generally used at the end of the whole jewelry. Commonly used in fishing lines, straight chains (without holes), ropes and other accessories, which need to be used with positioning beads or other beads.
......& gt& gt
Question 7: How to make beads by hand? What tools are needed? First, common tools:
1, pliers (most important) pointed pliers: round-headed flat-headed pliers (used for looping): diagonal pliers for finishing metal wires: jewelry pliers with three-in-one function are very easy to use, reducing the number of tool changes and improving work efficiency!
2, scissors, nail clippers scissors needless to say, nail clippers are used to cut off excess lines, some gaps are too small, just use this.
3. Tweezers: They are often used when making exquisite ornaments.
Second, the common wires:
1, copper wire: various colors, mainly gold and silver. There are two kinds: thick and thin.
Thick: As the main support of jewelry, you can also make your own super-long 9-character needle with excellent effect.
Fine: used for weaving small flowers, etc.
2. Steel wire: multiple strands of thin steel wire in the middle and a layer of plastic skin on the outside. Usage is similar to copper wire.
3. Fishing line: generally used for a string of 0.25mm beads within 5mm and a string of 0.5mm thick beads around 10mm.
4. Elastic thread: it is equivalent to the "rubber band" used on bracelets and necklaces. It can be used directly without pressing buttons, which is very convenient.
5, jade line: a large number of jade chains are used, which can also be used as a rope on mobile phone pendants.
6. All-cotton wax thread: Add a thin layer of wax outside the all-cotton thread, which is very durable.
7. Leather rope: colorful, basically made in China.
8. Polyester thread: also known as Baota thread, it is mostly used in the clothing industry. It is man-made fiber, which is very strong and is mainly used to fix the beads on clothes and bags. A variety of colors, transparent is the most commonly used.
Third, other tools.
1, beading needle: it's different from the household one, it's very long, and it's specially used for beading.
2. Crocheting: Some styles are crocheted (with fine copper wire as wool and various beads in the middle, which has a special taste).
3. Glue: AB glue (ornaments should be dried thoroughly and divided into two branches, A and B, and AB should be mixed together when used) is imported and made in China.
4, hot sol stick: it is used to stick flowers on the hairpin, MM should be familiar with it! You can use it as soon as you heat it with fire.
Question 8: Weaving method of beaded wallet 1. Basic tools:
1, pliers (also known as diagonal pliers, wire clip money): used to cut some thin wires or needles with inappropriate lengths. It is recommended not to cut thick steel rings (such as rings and handgongs). );
2, round nose pliers (also known as round nose pliers, needle bending pliers): used to bend a beautiful circle, generally used for 9 needles, T needles and so on. ;
3. Needle-nosed pliers (flat or toothed): can be used to clamp the positioning bead flat, straighten the bent thread or needle, break it and merge it into a single circle. Toothless pliers can avoid leaving tooth marks on accessories, which will affect the appearance; Toothed pliers prevent articles from slipping; Other uses need to be practiced slowly by yourself;
4, tweezers: used to clip some small accessories, especially when sticking diamonds or sticking small things;
5, scissors: used to cut lines and ropes;
6, glue: no need to stick, it doesn't matter if you are not prepared. Glue is divided into AB glue, dry glue and hot melt adhesive.
AB glue-used for sticking diamonds and the like, and the sticking effect is better.
Quick-drying adhesive-generally used for auxiliary purposes, it is fragile after drying and is not suitable for sticking diamonds. After sticking, the edge is white. I usually use it as a primer.
Hot melt adhesive-suitable for sticking cloth and ear needles. There is also hot melt glue gun, which is used with thermal glue. The adhesive tape can be directly heated by fire, but it will make the adhesive black and affect the production effect. If the requirements are high, it is better to use a glue gun.
7, beading needle: used for beading, some lines are soft, it will be more difficult to use beading directly, or when the beads are too small, you need to use a needle;
8. Tool ring: single ring is easy to open and close;
9, storage box, storage box: not a necessity, you can store loose bead accessories. Avoid finding trivial things. With it, you can clean up each other's work area.
* If you don't use tools frequently, you can find ready-made alternative tools when you use them occasionally, and you don't need to buy them all at once. Second, accessories: divided into basic accessories, targeted accessories and special accessories.
1, basic accessories: refers to the most commonly used and needed.
Single ring: it is also called O-ring and C-ring, but its use is the same, and there are many models, usually 4 mm and 6 mm, which play the role of connecting two accessories;
T-pin: Like his name, it's T-shaped, with a needle at one end and a flat at the other. It has various specifications. Commonly used lengths are 2cm, 2.6cm and 3.5cm, and the thickness is generally 0.7 mm, which is generally used at the bottom. Beads are strung on it and hung on the bottom of jewelry.
9 stitches: 9-shaped, with round end and tip, and various specifications. Commonly used lengths are 2cm, 2.6cm and 3.5cm, and the thickness is generally 0.7 mm Generally, after beads or other accessories are placed in the middle, the other end is also wound into a circle, and other accessories can be connected up and down.
Thread winding buckle (clip, shell buckle): It plays a connecting role in jewelry, generally used at the beginning and end of the whole jewelry, and is often used in conjunction with fishing line and positioning bead;
Positioning beads (retaining beads, positioning tubes): flattening plays a fixing role and is mostly used for winding buckles. It is an essential accessory for making bracelets and necklaces. Can also be used externally, such as tassels, beads need to be fixed in a specified position.
Fishing line: transparent, not easy to break, but pay special attention when knotting, because the fishing line surface is smooth, and it is easier to loosen if the knot is not good. When making a finished product, the end of the fishing line is generally used with a buckle and a positioning bead. Fishing line is mainly used for pattern beading. Generally, the thickness of 0.2-0.3MM is selected, and the 0.6mm fishing line of large vases and tissue boxes is thicker.
Round elastic line: transparent and round, similar to fishing line, but more elastic than fishing line; The elasticity is relatively general, and it is versatile to wear ordinary round bracelets; When fastening, the dead buckle must be fastened. It is suggested to drop another drop of liquid glue to avoid the thread slipping and losing the beloved beads.
Filamentous elastic thread: multi-colored, flat, composed of multiple thin threads, often used to wear crystal bracelets with beads of different colors; In the case of frequent friction with beads, it is easy to break after a long time, especially the string crystal and glass, which often need to be replaced;
Rope and jade thread: mainly used for necklaces and bracelets. At present, this kind of thread is not widely used in crystal beading, and it is most suitable for beading that needs strong drape. This effect can't be achieved by other wires; Jade thread can be worn with jade weaving;
The following two kinds of wires have always been easily confused by many friends, so they are specially marked here. Dear friends, don't make any more mistakes.
Copper wire: soft texture, suitable for modeling, different specifications and thicknesses have different effects; Used to repair things ... >>
Question 9: How to make the joint of braided bracelet? Just put the two heads together with a new rope and braid them according to the original one.
Production method:
1. Orange pliers bend the top ends of 9-shaped nails and T-shaped nails for sealing metal joints, and are also convenient for handling broken jade, necklace locks and single rings. 2. The small blue pliers are used to cut off 9-nail, T-nail and other metals.
3。 The red pliers have the same function as the orange pliers. Beaded needles are thinner than ordinary hand needles. They can be used for beading and sewing clothes. A measuring tool before the bead ruler penetrates the bead. You can know whether the beads are enough by measurement, and you can buy them in the bead shop. Fishing line and metal line fishing line: Most of the tools used for knotting ornaments are colored and rubber fishing lines, which are thin and transparent and can make the strung ornaments more beautiful. Metal wire: Metal wire is often used because its shape can be changed at will. Necklace locks are used when making necklaces, bracelets and other accessories, and can be selected according to the color of the accessories. The connecting chain can be used to pass through the big pearl hole, cooperate with the T-shaped needle and the G-shaped needle, and can also be used as an accessory to be cut to a suitable length with pliers.
Two. Use tools to make knot ornaments.
1 。 Treatment method of metal positioning tube. Metal locating tube is the basic component to prevent beading and lock from falling off the thread, and it is clamped with pliers after being screwed on the thread. Put a positioning tube and a metal ring on the wire, as shown in the figure, and clamp it with pliers.
2。 How to use T-nails? After putting on the beads. The vertex of the dome is used as an assembly. It may be difficult at first, but it will be easy after you get used to it. After putting on the beads, bend the tip 90 degrees with pliers. Leave 7-8 mm at the bead edge and bend it with pliers.
3。 How to use metal joint Metal joint is a necessary part to connect the lock of necklace. Pulling the thread end out of the joint incompletely and pressing the positioning tube should be handled in the joint. Put a metal buckle on the tip of a beaded fishing line and press it.
4。 Spherical metal joints Because ordinary metal joints have no spherical cavities, spherical metal joints are selected when using spherical metal chains. Place a spherical metal joint at the top of the spherical metal chain and clamp the joint with pliers.
Third, the basic operation of knot ornaments
1。 The following are the basic steps of all jewelry making, even if it looks complicated, if you master this method, it will be handy. Put beads in the middle part of the line and cross them with purple beads to form the "8".
2。 The compilation method is basically the same as that of 1, except that two lines are used to compile from the center first. Sometimes there are themes suitable for this method. Put yellow beads in the middle of the two lines and cross them left and right as shown.
3。 The beading method adopts the basic knitting method of 1 and 2, and the beads of 12 are sequentially braided into three groups of 1, and then the beads are crossed in the center of the preliminarily braided ring with a thread, and the thread is tightened. There are thousands of knotting methods for knot ornaments, but there are basically only a few basic knitting methods. If you are a beginner, let's try it together.
Question 10: Hand beading, looping, looping and needle bending. I come from a foreign country. Pick up handmade beading in Yiwu and go back to my hometown to do it. Is it easy to find? Even we have people who go to Yiwu to pick up handmade beads. They often have goods there, but the price is very low. I want to know about it. Help me. I'm unemployed now, and I still work in Waao Handicraft Home Network all the year round. You can go and have a look.