Then, press the "2" key, and the weight bar will appear CAP, showing 75,000.
3. The operating weight column shows d 1, and the operating list column shows 2, and then press the "Accumulate" key to enter the calibration selection.
4、? Debugger code calibration shows decimal places at this time, which is the default factory value and can be ignored if it is not operated. Press the "Add" key to enter the next step.
5、? At this point, the weight value will appear. Enter as many weights as possible and keep decimal places. After the input is finished, press the "Add" key to enter the next step.
6、? CAL appears in the weight column, 0 appears in the single weight column, and the weight value appears in the total column. Prepare the weights, then press the "Accumulate" button to enter the next step, and the display screen will be 0 to continue.
7. Put the weight and wait for a few seconds. When the weight of the weight bar jumps to grams, it means that the debugging code calibration of the electronic scale is completed. Restart the electronic scale and it can be used normally.
Extended data:
Calibration method of household electronic scales;
1. In the shutdown state, press and hold the "Mode" key first, and then press "On/Off". When a set of internal code values appear on the display screen, release these two keys, for example, "-7484" will be displayed. Pressing the "On/Off" key again will prompt you to enter the weight of the corresponding gram.
For example, when calibrating 5000g with 2000g weight, the display will prompt "2000". After putting in the corresponding weights, press the "On/Off" key again, and the display screen will quickly display "Pass" to indicate the completion of calibration. It can be used normally after restarting.
2, if there is no weight, you can weigh the corresponding weight on the electronic scale, such as glass cups, add and subtract water appropriately, fine-tune for many times, or you can adjust a quasi-weight.
Baidu encyclopedia-electronic scales