How to maintain the new solid wood floor?
1, corrosive liquids, strongly acidic and alkaline substances, such as toilet cleaner and kitchen degreasing agent, etc., and high-temperature liquids or objects are not allowed to be placed directly on the surface of the wooden floor to avoid damaging the surface. Of course, remember to clean up the spilled medicine in time.
2. Solid wood floors are afraid of water. In summer, it is necessary to prevent rain and water accumulation outside the window. In winter, we should prevent the heating at home from running away. If you accidentally leak water, even a little tea, you should wipe it with a soft rag in time and keep it dry, so as not to promote luster, or even cause warping, cracking and mildew. If the indoor cement floor is wet due to backwater (which is easy to happen in the ground floor room), there will be problems such as mildew, warping and expansion, paint peeling and discoloration. It must be solved first, and then the floor should be renovated and repaired.
3. Keep indoor ventilation regularly, which can not only make the chemicals in the floor volatilize as much as possible and be discharged outdoors, but also make the humid indoor air exchange with the outside world. Especially in the case of long-term uninhabited and maintenance, indoor ventilation is more important. Common practices are: often open windows or doors to make air convection, or use air conditioning system and ventilation system to create a dry and clean indoor environment.
4. Don't throw unlit cigarette butts and matchsticks on the ground at will. Electric stove, rice cooker, electric iron, soldering iron, etc. Before putting away the anti-ironing pad, you should not put it on it at will, otherwise the wooden floor will be easily scalded. Don't use gasoline to wipe the dust and dirt on the surface, in case of static electricity caused by friction and fire.
In the dry season, it is beneficial to increase humidity. The simple way is to put a pot of water in the corner. This practice is found in many supermarkets and jewelry stores. Of course it makes sense. Or buy a humidifier, turn it on, increase the humidity of the air, and keep the moisture in the air, so as to avoid cracking the wooden floor due to too dry breathing. It is normal to keep the air relative humidity between 40% and 70%.
6, where there is sunshine, try to avoid exposure, and follow the exposure time is long, to avoid overheating or accelerate the oxidation reaction. Let the fan be a heater, and the heater placed directly on the ground is also a wooden floor. Remember to use it less or at a suitable distance.
What are the common problems of new solid wood flooring?
1, deformation
Solution to the deformation of ceramic tile: the skirting board next to it should be removed immediately, so that convection can be generated under the floor, and moisture can be discharged, so that the board surface can slowly recover to the level of water evaporation; When the deformation is serious, remove the tile floor immediately, put it flat in the shade for ventilation (don't expose it to the sun or blow it hard), and add a flat weight on the floor to make it return to normal. When the curvature exceeds 1%, the floor with serious tiles should be replaced.
2, arching
First, remove the skirting line, cut a knife with an electric disc saw in the place where the arch is serious, so that it will not arch again because of continuous expansion, and then observe it for a day or two. If it does not arch again, replace the sawed floor with a new floor; If the arch camber is serious, after the skirting board is removed, the old floor will be removed and repaved. If the floor surface is damaged during disassembly, a new floor should be replaced.
Cracks will appear when the floor is dry.
Put a basin of water on the ground or radiator to increase the relative humidity of the indoor environment. It is recommended to use a humidifier. In severe cases, all floors should be removed, resurfaced and some floors should be replaced as appropriate. At this time, expansion joints should still be reserved to prevent the floor from swelling due to moisture.
Through the introduction of the above article, how do you maintain the newly paved solid wood floor? What are the common problems of new solid wood flooring? I think we know something about this. Proper maintenance of the new solid wood floor can keep the luster of the solid wood floor. Also pay attention to the common faults of the floor. Once problems are found, they need to be solved in time. I hope Bian Xiao's introduction can help everyone.