What if the dead link is too big? I believe many people will find a problem when wearing a ring-why is this ring getting looser and looser? In fact, the ring is loose for several reasons:
The first one: your ring is made of pure gold, and it is alive, and it has been open for a long time;
The second type: your finger wearing a ring has been wearing a ring for a long time, and it has adapted to this metal buckle physiologically, and gradually becomes "thin" in the position of the ring;
The third type: seasonal reasons, the principle of thermal expansion and cold contraction is the same for people. It is normal to buy a ring in summer and feel a little loose in winter.
What if the ring is loose? Do you want to give up your precious ring? Don't worry, I'll give you some advice today. After searching a lot of information, I summarized that the "rescue" scheme can be roughly divided into the following categories. Let's have a look!
A big action to save the ring-what if the ring is loose?
No.65438 +0 winding mode
This method is also a more traditional method. The older generation can often see that the problem can be solved by winding a thin red rope (or other thin rope) on the side or palm of the ring and winding a line with a corresponding thickness according to the size of the gap between the ring and the finger. Silver rings can be wrapped with white or gray thread, and gold rings can be wrapped with thin brown or yellow thread.
No.2 tape method
When the ring of your favorite style is relatively large, you can cut the transparent tape about the width of the ring and stick the tape inside the ring. Some people will use plastic wrap instead of tape, and the effect is the same. This can solve the problem without affecting the beauty of the ring. Simple little method, many people can use it!
Size adjustment method of No.3 specialty store
If you don't want the ring to be wrapped around the wire and don't want to put tape on it, then the safest and most reassuring way is to take the ring to a specialty store for processing and make it smaller. It may cost you a little money, but your beloved ring can be restored to its original beauty and fit your finger perfectly. Why not?
Some parents end up with different ring sizes because of online shopping. Parents are advised to choose brands and quality carefully when shopping online. Secondly, they can find some businesses with online experience centers to experience rings on the spot, and at the same time, they can avoid buying rings that are not suitable for them. But you can also customize your own ring, which means going up a flight of stairs.
What if the ring is too loose? If it is alive, adjust it yourself. If you are worried that it won't work properly, go to the store where you bought it and ask them to adjust it for you. If it is not alive, put a red rope around the ring. I have seen many older people use this method. I bought a wedding ring Levis, but it was a little loose later, so I used this method.
Tell me what to do if the ring is too loose. Wear it on your fingers, or wear it in summer because it expands with heat and contracts with cold, or go directly to the store to change the size.
What should I do if the ring is always loose? If you find that the ring you often wear is loose, don't rush to the jewelry store to ask the craftsman to help you modify it, because if your body or season changes, the ring will be unstable, so you can use some tips to make the ring smaller temporarily.
The most common way to loosen the ring is to wrap a thin thread around the side of the ring near the palm of your hand, and wrap a thread with the corresponding thickness according to the gap between the ring and your finger, which can solve the problem of ring looseness. However, this method greatly affects the beautiful wearing of the ring, so many young girls don't like to use this method.
Maybe you don't like the way the thin thread is wound. You can also apply a layer of transparent nail polish on the inner wall of the ring. Nail polish should have a certain thickness, and transparent nail polish will not affect the beauty of the ring. You can clean up when you don't need it.
Usually, if you encounter the problem of loose rings in your daily life, you can use the tips taught in the above small series. If the ring is not particularly loose, it is best not to send it to a jewelry store to modify it easily. After all, modifying the ring will do harm to the quality of the diamond ring. If you can solve the problem of loose ring in your own way without damaging the ring, why not?
The ring is loose. What should I do? The older generation usually like to wrap some thread around the ring, which will be relatively tight. If you don't like it, just pinch it a little on the side, but be careful not to push too hard. If you still can't or dare not do it, go to a craftsman. Basically, some stores will do it.
Adopt it
What if the gold ring always comes loose? What kind of plastic hose is transparent (the gold shop should have it, that is, the kind that drips), or it can be welded directly (not recommended, it may become fat in the future, so it is not good to make it again).
What if I buy a big wedding ring? What if the wedding ring becomes loose? I believe many people will find a problem when wearing a ring-why is this ring getting looser and looser? In fact, there are several reasons why the ring is loose: first, your ring is pure gold and alive, and it has been open for a long time; The second type: your finger wearing a ring has been wearing a ring for a long time, and it has adapted to this metal buckle physiologically, and gradually becomes "thin" in the position of the ring; The third type: seasonal reasons, the principle of thermal expansion and cold contraction is the same for people. It is normal to buy a ring in summer and feel a little loose in winter. What should I do at this time? Do you want to give up your precious ring? Don't worry, Bian Xiao will give you advice today. Bian Xiao consulted a lot of information and summarized it. The "rescue" plan can be divided into the following categories. Let's have a look! The 65438 +0 winding method is also a traditional method, which can often be seen by the older generation: winding a red string (other strings can also be used) on the side of the ring or palm, and winding a metal wire with the corresponding thickness according to the gap between the ring and the finger can solve the problem. Silver rings can be wrapped with white or gray thread, and gold rings can be wrapped with thin brown or yellow thread. No.2 adhesive tape method When you encounter a big ring with a favorite style, you can cut a transparent tape that is almost as wide as the ring and stick the tape inside the ring; Some people will use plastic wrap instead of tape, and the effect is the same. This can solve the problem without affecting the beauty of the ring. Simple little method, many people can use it! No.3 shop resizing method If you don't want the ring to be wrapped around the line and don't want to put tape on the ring, then the safest and most reassuring way is to take the ring to the shop for processing and resizing. It may cost you a little money, but your beloved ring can be restored to its original beauty and fit your finger perfectly. Why not?
The ring is a little too big and loose. Is there any way to tighten it? If the gold ring is soft, you can pinch it off yourself, or you can go to the place where you bought it and let others help you get it.
What should I do if the ring is too loose and easy to slip? Tie it to the back with a nice thread.
How thick it is depends on you ~ ~ ~
If it is dirty, you can take it down and do it again.
References:
Um ... -
Can the gold ring be loosened? The dead button cannot be released. I used to wear a gold ring with a dead button. After each wear, the ring will turn white because of tight blood circulation. It is recommended that the gold dead buckle ring should not be worn for a long time. Take it off and have a rest at night.
If you really want to loosen it, I suggest you go to the gold shop where you bought the ring for help.