2. Drive-In order to raise and lower the umbrella cover, the cover shaft can be electrically driven by a hand crank with gears or a tubular motor.
3. Arm wing protection device-a special structural element of the awning arm attachment, which is used to prevent the awning arm from lifting when there is wind load.
4. Extensible hanging cloth-a kind of long hanging cloth made of awning fabric, which is wrapped around the hanging cloth installed in? Fall on the fabric shaft on the contour. When the yarn is released, additional light protection can be provided to prevent direct sunlight or unnecessary scanning of privacy.
5. Profile-The profile of the front end of the awning. When the fabric is stretched, it will be attached and tightened.
Fixing element-an assembly used to fix a sunshade or sunshade assembly. This includes brackets, R-joints, junction boxes, gaskets, pillars, etc.
Roof Profile-The top profile of the awning (roof). Protect the shrunk fabric from the weather.
Rear frame fastener, which is used to fix the sun visor to R (usually used in combination with the console).
Die casting-the process of producing precision aluminum parts by pouring liquid aluminum into special die casting molds under high pressure. The tensile strength and fracture resistance of comparable parts are lower than those of die forging parts.
The aluminum surface is protected by anodic oxidation without additional coating.
Boom-integrated sunshade arm, which is connected to the facade and performs downward circular motion. You can use the placement arm to release the cloth connected to the placement profile.
Hanger awning-the awning for external walls, whose fabric guiding system consists of suspenders attached to the wall and falls in a circular shape ("falling"). As a result, the cloth attached to the contour of the droplet is inclined from the wall.
Facade awning-awning, used for direct light or protecting room privacy, includes support system, fabric shaft with rolled fabric, descending profile, driver and fabric guiding system. It is directly connected to the front or above the front window. According to the direction of fabric movement, the cantilever awning, vertical awning and awning bisector are distinguished.
The guide rail assembly is used to realize the lateral guidance of the greenhouse or facade in the fault direction. Guide rails usually include carriages, rollers, sliding devices and traction devices.
Radio Control-Option to operate the sunshade motor driver by radio remote control.
Articulated arm-A multi-part awning arm in which all parts are connected by hinges. The driving force of deployment is an integrated energy storage device (such as tension spring), and its arrangement and strength determine the fabric tension of the awning. Radiant type
Arm awning-awning, including support system, fabric shaft wrapped with fabric, descending, driving device and articulated arm.
Die forging-the process of forming high quality aluminum profiles. Parts with high tensile strength and fracture strength can be obtained by pressing the preheated aluminum blank in the special die of die forging press.
Transmission-manual drive, used to assemble the sun visor. The difference between worm gear and bevel gear. Due to the gear ratio, a hand crank can usually be used to extend and retract the awning with acceptable force.
Semi-box awning/sleeve awning-articulated arm awning has weatherproof and privacy protection functions when it is put away by wrapping the fabric shaft and fabric in the sleeve outline. Support system and sunshade arm are not included.
Box awning-The telescopic articulated arm awning is protected all day by covering all awning components with an almost closed box awning.
The junction box fixing piece is used for fixing the guide rail of the protective shed.
A bracket fixing element for fixing the sun visor to a wall (wall bracket) or a ceiling (ceiling bracket).
Console tube-see support tube.
Coupling unit-coupling two or more awnings to achieve greater overall width than possible single investment. A universal drive is usually possible.
medium size
Markisolette- Exterior wall awning, whose fabric guiding system consists of a vertical guide rail, in which a short suspender is installed, which slides down and then falls down. Through the cloth guide tube, the cloth is guided vertically first, and then opened in front of the window.
Emergency crank motor-tubular motor with additional manual crank operation (for example, emergency operation in case of power failure).
Open hinged canopy-hinged canopy, when exposed (unprotected), all its components are exposed to the weather.
Powder spraying-spray the parts with special plastic powder, and then heat treat them to form a closed decorative corrosion-resistant surface.
Rainfall Monitor (Sensor)-An electric automatic control option that retracts the awning when it rains.
Tubular motor-the tubular motor is inserted into the cloth shaft to save space.
Slit cloth-Additional narrow cloth that can be rolled to cover the gap between two adjacent cloths in the coupling system.
? Vertical awning-external awning, the fabric of which is usually rolled vertically not far from the external wall. Weigh and vertically guide the rag with tension rope or guide rail.
Sunlight and Wind Monitor-An option to automatically control the sun visor motor drive. On the basis of the preset limit value, the expansion and contraction of the crown is controlled by the intensity of light and wind. If the wind load is too large, the windshield can prevent the awning from being damaged.
Rotary jet dyeing-the process of coloring plastic fibers during rotation. Plastic fibers are dyed and then not color-treated.
Pillar-fixing element, which is used to install the greenhouse awning at a position far away from the glass surface, for example, to open the ventilation window.
Support tube-the basic component of most articulated booms. All the supporting parts of the awning are installed on it. The awning is fixed on the vertical plane of the bracket through the support tube.
Fabric awning. Modern canopy fabrics are made of opaque, non-fading, anti-fouling, waterproof, anti-tear and anti-corrosion materials, such as spun-dyed polyacrylonitrile fiber, glass fiber mesh or Soltis mesh.
Fabric Duct-Duct connected across the width of the canopy between the guide rails, allowing the fabric to extend from the vertical direction to the extension direction (see canopy outline).
Fabric tension. Description of fabric tightness of extended awning.
Cloth pole-basically a hollow metal pole (tube) with cloth wrapped around it.
The variable crank (gear) can be operated by a manual crank to continuously adjust the inclination of the articulated arm of the sun visor. Therefore, according to the time of day/season, the inclination of the awning is adjusted to the position of the sun to achieve the best shading effect.
Wing ing- awning is the awning fixed on the front guide rail and the resulting textile front cloth, generally about 20 cm wide jewelry and privacy strips.
Wind load-the load that the wind blows on the tree crown. The allowable value is 70N per square meter of cloth. This corresponds to the wind force 5. Sunshades with wind force greater than 5 must be retracted to avoid possible defects.
Greenhouse awning-used in the awning of a greenhouse or in front of the external wall of a building, including fastening elements, guide rails, fabric shafts with rolled fabrics, descending profiles, driving devices, traction devices and fabric tensioning systems. In principle, a piece of cloth is stretched across the surface to be colored, which has high tension.
Traction device-the traction device is used to pull the fabric out, for example, along the guide rail of the greenhouse. For this purpose, chains, pull ropes or cables are usually used.
For more details, please pay attention to Zhuomei official website.