Jindun 40 1 quick-drying super adhesive is a kind of quick-drying adhesive with α-cyanoacrylate as the main component. After it reacts with the trace moisture on the bonding surface, it instantly shows strong adhesion. This product has many grades and can adapt to different purposes and uses. Suitable for quick bonding of most materials, such as metal, rubber, plastic, glass, leather, wood, ceramics, etc.

Usage and precautions

Application mode

1. First clean the bonding surface to remove dust, oil stain and rust. When bonding metals, it is best to grind them first. For plastics such as polyethylene, polypropylene or PTEE, the surface should be activated first.

2. Open the front cover, gently buckle the tip with your fingers so that there is no residual liquid, and then cut out the hole with scissors.

3. Drop a small drop of adhesive on the surface to be bonded, then do it immediately and keep it until it becomes hard. The bonding area should not be too large, and the thickness of the bonding layer should not exceed 0.2 mm. ..

4. Wipe the container after use, cover it, and store it in a cool and dry place or refrigerate.

Matters needing attention

1. The steam of this adhesive will irritate mucous membranes and eyes.

2. Avoid contact with skin and eyes. If there is any accident, immediately flush with plenty of water and send it to a doctor. When cleaning eyes, you can use dilute sodium bicarbonate solution.

3. When touching your hands, you can clean them with soap, water, washing liquid and pumice.