A, chandelier lamps installation strategy
The chandelier is a kind of high-grade decorative lamp used on the indoor ceiling, and its noble shape can show the grandeur of the house. The use of chandeliers requires the house to have enough floors, and because of the weight of chandeliers, the fixation must be firm.
Installation method of chandelier:
1, the chandelier is fixed
When fixing the chandelier, first draw the drilling point, punch the hole with an impact drill, and then drive the expansion screw into the hole. It is worth noting that because the load of the chandelier is generally greater than the ceiling lamp, it is necessary to fix the ceiling with a metal hanging plate or hook first, and then connect the pedestal of the chandelier, which can make the installation of the chandelier more firm.
2, chandelier connection
Tighten the screws and the base will be installed. Connect the power cord, and the exposed part of the copper wire is wrapped with insulating tape. Then connect the boom with the base and adjust the appropriate height. Finally, install the lampshade and bulb of the chandelier.
Precautions for installation of chandelier:
1, pay attention that the chandelier cannot be installed too low.
The use of chandeliers requires the house to be high enough. No matter whether the chandelier is installed in the living room or dining room, it should not be hung too low, so as not to hinder people's normal sight or make people feel dazzling. Generally, the height of the sling can be adjusted. If the house is low, it is brighter and more generous to use the ceiling lamp.
2, pay attention to the chassis fixed firmly and safely.
The most basic requirement for the installation of lamps and lanterns is that they must be firm. When installing all kinds of lamps and lanterns, they should be installed according to the requirements of the installation instructions of lamps and lanterns. When the weight of lamps and lanterns is greater than 3kg, embedded hooks should be used or expansion bolts should be used to directly fix supports and hangers from the roof for installation.
3, check whether the derrick connection is firm.
Generally, the suspenders of chandeliers have a certain length of thread, which can be used to adjust the height. After installation, besides carefully checking whether the chassis is firmly fixed, we should also pay attention to the reliability of the connection of the light box suspended under the hanging boom.
Second, the ceiling lamp installation strategy
Most ceiling lamps are flat and stick to the roof, just like sticking to the ceiling, hence the name. The ceiling lamp has small space and even and soft lighting, which is especially suitable for use in halls, corridors, kitchens, bathrooms and bedrooms.
Installation method of ceiling lamp:
1, ceiling lamp fixed
First, put the chassis on the roof, draw the punching position according to the fixed position, and punch a hole in the position to be installed with an impact drill. Use a hammer to fill the holes with fixing parts such as expansion screws. It should be noted that the bearing capacity of the fixing parts should match the weight of the ceiling lamp to ensure that the ceiling lamp is firmly fixed.
2, ceiling lamp wiring
Take out the wire on the roof from the hole in the chassis, and fix the chassis in the above position with screws. After fixing, connect the wire with the wire of the chassis, and wrap the exposed part of the wire connection with insulating tape. Finally, install lamps and lampshades.
Precautions for installing ceiling lamp:
1, pay attention to safe drilling.
For the safety of family members, unless there are special requirements, the hole in the wall of the fixed lamps is generally 6 mm When installing and using the impact drill, you must install a matching drill. Pay attention to the drilling depth when drilling to ensure that the expansion screw can completely enter.
2. Pay attention to the safety of the power cord.
The wires connected with the power socket of the ceiling lamp should be in good electrical contact, and it is best to wrap them with vinyl cloth separately and keep a certain distance. If possible, try not to put the wire ends under the same metal to avoid the danger of short circuit.
Third, the spotlight installation strategy
Spotlight is a kind of lighting lamp installed in a narrow space. Because it depends on reflection, it can produce strong light with little electric energy. Can be used to highlight a certain place in the room, but also to increase the three-dimensional sense and create a special atmosphere.
Installation method of spotlights and lamps:
1. Plan to keep the spotlight position.
The installation mode of spotlights is mainly embedded installation. Generally, lines are reserved according to the decoration scheme, so that decoration workers can make holes in the ceiling and appropriately reserve empty slots for spotlights.
2. Spotlight connection
Install the base in the empty slot of the spotlight, pull out the wire and install the fixing screw. Connect the connector and don't forget the insulation treatment. Finally press the spotlight section.
Precautions for spotlight installation:
1, note that the spotlight line needs to be equipped with a transformer.
Although spotlights are energy-saving, high brightness and strong decorative effect, they also have some disadvantages that cannot be ignored, that is, the voltage is unstable and easy to explode. Therefore, when installing spotlights, you must install transformers, which can effectively prevent explosions.
2. Pay attention to the correct installation of spotlights.
In the installation of lamps and lanterns and the choice of lighting, we must be moderate, especially shooting lights. If we blindly pursue the number of spotlights, it will cause light pollution and it is difficult to achieve the ideal decorative effect. At the same time, too many spotlights are placed, which is more likely to cause fire hazards.
The above is a detailed answer about the installation of lamps. I wonder if you are satisfied with our introduction.