Question 2: How to clean the stainless steel bracelet at home? Cleaning method of stainless steel watchband 1:
Preparation: an old magazine, a clean plastic wrap, an old toothbrush and detergent.
Operation process:
Put the plastic wrap together with the magazine first, and then roll it into a tube, so as to prevent the book from getting wet when cleaning the strap later. Then put the watch on this rolled cylinder. Slowly enlarge the rolling cylinder of the magazine until the strap is completely opened, so that the watch will not fall off. First of all, it is convenient for later cleaning, and more importantly, after opening the strap, the stains at the gap of the strap can be cleaned.
The next step is to clean the strap. Clean the surface of the strap first, and then clean the stains in the gap of the strap. These gaps are closely connected, and it is difficult to clean up the dirty things inside. Now these gaps are all made of books, so it is natural to clean up the dirty things inside. Then clean the back of the strap, and also clean the stains on the surface first. Next, clean up the stains in the gap. Then the cleaning work is finished. Finally, clean the strap with clean water.
All the processes used have been completed, and all that remains is to put the strap in the shade to dry.
Cleaning method of stainless steel watchband 2:
Soak the watchband in boiling water containing detergent for about 15 minutes. Because the rings on this watch band are closely connected, the cylinder made of books can't open the gap at the connection. Put in hot water, it uses the principle of thermal expansion and cold contraction to make the gap at the joint open by itself, which is more conducive to cleaning. Next, you need to clean the strap. The method is similar to the first method and will not be described here.
After cleaning, soak the watchband in cold water for about 15 minutes. The purpose of this is, first, to clean the washing bubbles on the watch band; Second, using the same principle, the rising gap of the strap is restored to its original state. After soaking, dry the strap in the shade.
Question 3: How to clean the stainless steel strap? Stainless steel itself is extremely difficult to oxidize and can be directly washed with water.
Question 4: How to clean the stainless steel bracelet? If worn for a long time, there will be pollutants, sweat stains, dust, components and sundries produced by the long-term running-in of the metal bracelet. If it is a stainless steel bracelet, it is best to wipe the stains on the metal bracelet with a small cotton swab dipped in industrial alcohol or white oil. If you can't wipe it off in some hidden places, you can soak it in industrial alcohol or white oil for a few minutes first. Wipe it again or blow it with a hair dryer. If the bracelet is made of alloy or copper, this bracelet will not only produce stains, but also corrode the electroplated layer on the bracelet for a long time, resulting in blackening and deplating. This phenomenon will also look like a stain on the surface, but it cannot be erased.
Question 5: How to maintain and clean the metal strap? What should I do if there is something dirty in the strap seam? Wearing the strap for a long time, the sludge accumulated at the joint of the watch or the surface of the belt mixed with sweat and dirt will greatly affect the beauty of the watch. When this happens, you can gently brush the strap and seam with a soft toothbrush dipped in some toothpaste or detergent, then rinse it with clear water, wipe it with flannel, and blow dry the strap with a hair dryer. In addition, K-gold watches will change color due to oxidation when worn for a long time. In addition to giving it to the master, you can also wipe it with tooth powder, and the effect will definitely satisfy you. In jewelry watches, consumers should not only pay attention to whether there are signs of loose diamonds, but also wash the dirty parts of diamonds with a toothbrush dipped in salad. It is also a good way to soak them with jewelry syrup.
It should be noted that
1. No matter how careful you are, there will still be water seepage during cleaning. If the watch body is flooded by cleaning the strap, it will not be worth the loss. If you are worried about this, you might as well leave the watch to the master.
2. If the metal strap is wet (water, sweat stains, etc. ) and untreated, it is easy to rust. Metal rust or dirt can easily seep from the seams, stain clothes, and even cause skin allergies, so please remember to dry the seams with a cloth after taking off the watch or washing it with water. In addition, the diving watch can be washed with clean water after landing, but the use of chemicals is easy to cause injury.
3. Because of its soft material, the K gold strap is easy to be scratched when it is hit or touched improperly. In addition, the traffic exhaust in life, chlorine gas in swimming pool or human sweat will make the K-gold watch discolor. Keep the watchband dry and put it on carefully, and watch made of titanium or high-tech ceramics with high hardness should also be careful to avoid hitting or falling. After all, hard doesn't mean invulnerability.
Question 6: How to clean the 1 inside the bracelet on the hand surface? First, dip a small brush in soapy water, quickly scrub the dirty place, then rinse it quickly with clear water, then dry it with a dry cloth, and finally apply some leather oil (people with sensitive skin are advised not to use any maintenance agent on their backs).
2. There is also a 3S principle for cleaning leather strap. The so-called 3S principle refers to the use of lotion compatible with the skin and soft wet cloth to dry quickly and naturally. In general, you should try to avoid the contact between the watchband and water. If you accidentally get wet, try to wait until it is air-dried before wearing it, so as not to stink. When sleeping, it is best to put the strap in a ventilated place and let the cortical cells open their breath; In winter, the strap is more hardened and tends to have a curved shape. Don't fold it back at this time to avoid hurting the cortex. In addition, the dust on the strap can be wiped with a clean cloth and naturally dried in a ventilated place.
3. If the belt is worn for a long time and the smell of sweat is heavy, you can quickly scrub the dirty place with a small brush with a little soapy water, then rinse it quickly with clear water, dry it with a dry cloth, and finally apply some leather oil (sensitive skin, it is recommended not to use any oil agent on the back). The whole cleaning process should be completed within 10 to 20 seconds, so as to avoid soap infiltration and affect the cortex.
Question 7: How do experienced people clean stainless steel watchbands? Ask customer service when you die. They specialize in watchbands and absolutely know how to care for them.
Question 8: The watch chain is dirty. How to clean it? How to clean it is recommended that you scrub it with alcohol.
Because alcohol cleaning is cleaner, it plays a role in disinfection. The bracelet is generally dirty, but the alcohol evaporates quickly, without residue and corrosion. Clean and bright after wiping. If possible, I will use alcohol cotton balls, if not, I will scrub my nails with soft paper dipped in white wine. My watch is Omega, which has been scrubbed with alcohol cotton balls. After wearing it for more than 5 years, it is still as good as new.
One more thing, I suggest you go to the local gold shop to buy a piece of metal polishing cloth, around 10- 15 yuan. It's the same size as the eye cloth. You should use it for maintenance.
Question 9: How to clean the metal strap by yourself? Seek professional methods. The strap is an important part of the watch, and the metal strap is the most common. From the material point of view, stainless steel straps are the most. In addition, precious metals, tungsten steel and titanium are also used. If the Swiss watch is worn for a long time, the strap will bear the brunt of wear. The problems are bad strap buckle, bolts or other types of connecting bolts falling off or falling off, surface scratch, discoloration of gold-plated layer and so on.
How to maintain metal watchband
1
First of all, it is necessary to check the pin and spring bolt between the strap section and the shell band regularly to prevent them from being detached or worn. If you run frequently, you should trim or replace it in time.
2
For Swiss watches with gold-plated case straps, it is recommended to wear them only in summer or change belts in winter.
three
The discount part of the strap is the most prone to problems, which is also related to wearing it at ordinary times. When opening and closing, the action should be gentle.
four
K-gold or gold-plated strap, avoid contact with mercury-containing chemicals, prepare sweat-proof gloves at ordinary times, and do more surface wiping tests. Some platinum watchbands are rhodium-plated and cannot be polished, otherwise the background color will leak out and turn yellow.
five
Tungsten steel watchband should be protected from impact and excessive tensile torque.
end
How to clean the metal strap?
The metal strap is easy to hide dirt after being worn for a long time, and the dirt mixed with sweat and scale at the joint of the watch looks unsanitary and needs to be cleaned regularly.
The professional practice is to remove the strap for cleaning and use an ultrasonic cleaner. The cleaning solution is clean water containing detergent. According to the degree of dirt, you need to do more cleaning, then rinse it with clear water and blow dry it with an electric fan.
three
If you plan to clean it yourself, it is also recommended to take off the watchband, add a proper amount of detergent in hot water, soak it for 10 minutes first, and then brush it with a soft toothbrush. Rinse with clean water and blow dry with an electric fan.
Question 10: How to clean the rubber band 1? In hot summer, the wearer is prone to sweating, and the silicone strap is not the best choice at this time. Once the strap is damaged, it is quite difficult to restore it. You can change the stainless steel belt first in summer and then the leather silicone belt in winter, so as to make the best use of it. Silicone strap should be as wet as possible. Wear it for a while and wash it with toothpaste. It is best to spray a thin layer of hand oil, which can not only decontaminate but also resist static electricity, and also make it shiny and greasy.
2. The silicone strap is easy to damage the surface under the erosion of sweat. The best maintenance methods in this case are cleaning, ventilation and drying. The silica gel belt is easy to age after being exposed to a lot of sweat, which will lead to color difference where the skin contacts with the silica gel belt, and even make the skin feel itchy. Of course, even the best silicone and careful care can't resist the baptism of time, and the old silicone strap will reduce the quality of the watch a lot. So generally speaking, if you wear it frequently, you should replace the silicone strap or spray hand oil at least once every six months.
3. The aging of silicone strap is the biggest trouble for the wearer of silicone strap. When the silicone strap is aging, dip a toothbrush in soapy water, quickly scrub the dirty place, and then wipe it with a slightly wet cloth. In order to prevent soapy water from infiltrating into the cortex, the whole process should be completed within 20 seconds. In addition, consumers can also apply some hand oil to the silicone watch to protect it and make it glow with new brilliance.
4. Direct sunlight will cause irreversible damage to the inside and outside of the leather surface, so long-term exposure to the sun will also cause deterioration of the silicone strap, which is also a place to pay attention to.
5. Don't wear silicone belt from time to time. If circumstances permit, it is best to have more than two watches or two straps that can be worn alternately. Silicone leather needs ventilation, and the ventilated environment can prolong the service life of the strap. Wearing different watches (watchbands) can not only reduce the risk of human injury, but also make the watchband get a full rest. In addition, the wearing of silicone strap itself is a process of constant wear and tear, so it is also necessary to pay attention to some daily details.
6, silicone strap hardening is also a common symptom. If the silicone strap is often in a humid environment, it will accelerate its hardening speed, and sweat stains will also erode the cortex, making the strap deformed, hardened or even broken, which will inexplicably lead to the loss or injury of the watch. Therefore, in addition to regular maintenance, never twist the strap when it becomes hard, and replace it in time. You can kill two birds with one stone by exchanging a little money for a beautiful and pleasant appearance and avoiding unnecessary losses. Why not?