1, if there are stains or other traces on the jewelry box, you can gently wipe the stained surface with clean cotton cloth after soaking, and then wipe it with dry cotton cloth to avoid residual water on the surface of the material or water infiltrating into the jewelry box during wiping, which will affect the use.
2. After cleaning and wiping, try to put the jewelry box in a well-ventilated place to dry, so as not to damage the material by the sun exposure.
3. The mirror of the jewelry box should always be wiped with a soft cloth to keep the mirror bright. If there is a cloth surface on the surface of the jewelry box, the detachable one should be disassembled and cleaned, and the non-detachable one should be treated with dust removal and impurity removal.
4. The interior environment of the jewelry box must be kept dry and clean to avoid damage to the jewelry box.
5. Store them separately when not in use, so as to avoid material deformation after extrusion and keep away from acidic or corrosive liquids.
Extended knowledge: knowledge of jewelry box cleaning and maintenance.
1. Wipe the jewelry box carefully and correctly, and don't wipe it with a dry rag.
When we wipe the jewelry box, we should try not to use coarse cloth or old clothes that we no longer wear as rags to avoid damaging the varnish on the surface of the jewelry box. Coarse cloth, wired or button cloth will scratch the surface of the jewelry box, so try to avoid using it.
It is also forbidden to maintain jewelry boxes with dry rags. On the one hand, it is difficult to clean the dust on the surface with a dry rag; on the other hand, the dust consists of fiber, sand and silica. Rubbing the dry rag back and forth is easy to damage the paint surface of the jewelry box. Although these scratches are very small, even invisible to the naked eye, the surface of the jewelry box will become dull as time goes by. The correct way is to use towels, cotton cloth, cotton cloth or flannel with good water absorption.
2. Avoid long-term direct sunlight.
Many people find that some water is still wet after cleaning the jewelry box, so they put it in the sun, hoping to dry it as soon as possible. In fact, this is very stupid, because most jewelry boxes are wooden jewelry boxes. After being cooled by water and light, the jewelry boxes will expand with heat and contract with cold, which will lead to the appearance deformation of the jewelry boxes and even the peeling of the skin, greatly reducing the service life and aesthetics of the jewelry boxes.
3. Do not use soapy water, detergent or clean water to clean the jewelry box.
Many people use soapy water, detergent or clean water to clean jewelry boxes. In fact, this behavior is not desirable, because cleaning products such as soapy water and detergent can not only effectively remove the dust accumulated on the surface of jewelry boxes, but also remove the silica sand particles before polishing. Moreover, because they are corrosive, they will damage the surface of jewelry boxes and make the paint surface of jewelry boxes dull. If you wipe it with a wet cloth, there will be too much residual water, which will easily cause water to penetrate into the wood.
Everyone needs to use the correct method when maintaining the jewelry box, so as to prolong the service life of the jewelry box.
Today's sharing is over. I hope I can help you.