Every couple wants to wear a pair of perfect wedding rings when they get married. Here I will share with you 2 1 wedding diamond ring selection tips so that you can wear a satisfactory wedding ring and fall in love forever.
1. Choose a wedding ring three months before marriage, leaving enough time to shop around.
2. The diamond ring, which symbolizes lifelong love commitment, doesn't care how big your diamond ring brand is. Whether you must choose a big diamond ring is a matter of opinion.
3. buy a diamond ring to recognize a professional appraisal certificate. Generally, it is the most authoritative and top-level appraisal issued by the National Jewelry and Jade Quality Supervision and Inspection Center and the Gemological Society of America (GIA).
4. After buying a wedding ring, most businesses have retention certificates. This must be kept, and you can come and fix it when there is a problem.
5. Diamonds below 20 points in China generally don't deserve a monitoring certificate, so don't be deceived by the self-proclaimed level of the merchants when buying. Professional identification order of diamonds
6. In the order of professional identification of diamonds, cutting is the first thing to look at, followed by color and clarity carat weight.
7. Diamond wedding ring, you should choose the diamond shape that matches your hand. The style of a diamond depends on the shape after cutting. Traditionally, there are five cutting shapes. Round, oval, pear-shaped, square and heart-shaped, while cutting, it also determines its mosaic method.
8. 1 carat = 100 cents, which is about the size of a soybean. At present, the carat diamond ring on the market is very popular and has the potential to maintain and appreciate.
9. Diamonds with the same weight, the bigger the table (desktop), the bigger the diamond will appear. Table refers to the plane of the diamond surface.
10. The diamond ring is not inlaid with pure gold. 24K pure gold is very soft, and diamonds are easy to fall off when embedded in it; and
Gold-based diamonds tend to project yellow luster, which is not good for the quality of diamonds.
1 1. The ring wall should be thick, so it is not easy to deform, and it will not cause the diamond to loosen and fall off. For example, the main diamond costs 30 points, and the ring costs 3-4 grams.
12. If the diamond is not big enough, the supporting part of the ring can be reduced to maximize the diamond visually. However, the smaller the holder, the smaller the part that catches the diamond, and the more unstable the diamond is.
13. The material of the wedding ring varies from person to person. Gold is suitable for Asian honey skin, while the purity and rarity of platinum are very popular. Rose gold has also become a popular material in recent years because of its soft color.
14. Brides with fat fingers avoid the design of slender rings, which makes it easy to pull their fingers out of two pieces of meat. You can choose a ring with a certain width.
15. It is more fashionable to choose the combination of diamonds and colorful treasures. Nowadays, in addition to using diamonds as the main stone, wedding rings are more like "the coronation of true love", and rubies symbolize the hearts of lovers. When exchanging wedding rings, it is time to exchange hearts.
16. The ring should be designed without grooves, so that the water after washing hands will not stay in it for a long time and the skin will not be allergic. According to the principle of ergonomics, the ring designed by Mrs. Jin's diamond inner arc technology adopts 12 grinding process, which is not only comfortable to wear, but also won't have ring marks after taking it off.
17. The pointed diamond ring is even more dazzling. Whether it is the classic four-claw or six-claw inlay method, in fact, the main stone is held as high as possible, so that a lot of light enters the diamond from all aspects, making it look bigger and more dazzling.
18. Choose a meaningful ring and taste it for a lifetime. If it makes sense, it will be beautiful.
19. You can choose a uniform pattern of "lovers' clothes" for the ring, so that people can recognize that you are a natural couple at a glance.
20. Buy diamond rings during large-scale promotions such as Christmas and Valentine's Day, and most merchants will have greater promotion efforts at that time.
2 1. If you buy a wedding ring with the same style for men and women, you should also consider the style suitable for both parties. It should be simple, simple and durable, and can be worn with everyday clothes. Simple and generous design is the best choice, and designs that are too fancy and childish or too feminine are not suitable.
How to choose a diamond ring
1. Weight carat. Needless to say, the bigger the better.
2. color color. According to the 23 grades of letters D to Z, the color of diamonds gradually decreases from transparent to white, light yellow, yellow and dark yellow. The value is also from high to low and then to high. What I want to say here is that the value of stones in Y and Z colors is not lower than that in E and F, so the price of colors follows the anti-parabolic image pricing.
D, e, f, this is the best document. Diamonds of this grade are colorless and transparent.
G, h, second grade, diamonds are white.
I, j, grade three, diamond light yellow.
Below J, it is not suitable for wedding rings, because the color has been spent. Unless you get colored diamond below U COLOUR, it is mainly used to decorate rings, and the price is also high.
3. clarity. Refers to the purity of the diamond. The purer the diamond, the higher the price. Levels can be divided into the following categories.
If, the best grade, the diamond is pure inside.
VVS 1, VVS2, with only a very, very small amount of impurities, can also be considered as a diamond with good clarity.
VS 1, VS2 is slight and cheaper than the above two grades, but the impurities inside are invisible to the naked eye. In other words, there is no difference between ordinary observation conditions.
SI 1, SI2, impurities can be seen under the magnifying glass of 10x, and sharp-eyed people may also see it directly.
I 1, I2 and I3 are not recommended, which can be said to be defective products.
When choosing a wedding ring, the cleanliness should be at least above SI 1. If it is lower than SI 1, the impurities in the stone can already be seen with naked eyes, which have a great influence on the color of the stone.
4. Stop working. It is the only factor that can decide people in 4c. From good to bad, the results are: excellent, very good, good, firm and poor. Personally, the most important thing to pay attention to when choosing a wedding ring is cutting. Even if the color and clarity are poor, choose the one with excellent cutting. At least, at least, it should be very good, otherwise the brilliance of the stone will not be reflected. It is very good that the stone below looks more like glass.
How to choose a diamond ring?
Buying a wedding ring may be the first time that many girls buy real jewelry for themselves. Here, I will introduce some problems that should be paid attention to when buying jewelry to help you choose your favorite wedding ring, because it should be an eternal witness of your love!
1. What metal base should I choose?
Gold and silver have been the most precious metals for thousands of years. At any time, in any country and region, these two things are hard currency with collectible value and can be used as currency. So until today, many people still use them as the main material of wedding ring base. However, in recent years, as a more precious and beautiful metal, platinum has sprung up all over the world, and its sales in stores have also jumped to the first place. Moreover, the hardness of platinum is higher, and diamonds are not easy to fall on it. There are G750 and platinum, and the price of platinum is nearly double that of G750. It is often said that PT950 and PT900 represent 95% and 90% of platinum content, while G750 is 18K gold, that is, the gold content is 75%.
In addition, two alloys, platinum and pink gold, are very popular abroad recently. These two alloys are made of gold and a small amount of other metals, and their colors are brighter, richer and more uniform than gold. There is also a kind of flower gold, that is, the alloys of different colors are woven or wound into different colors and patterns, which is both beautiful and elegant, and highlights the personality, which is of great treasure value.
The purity of gold is generally measured by "K". The greater the number of "K", the higher the purity, and 24K gold is pure gold. Under normal circumstances, 24k gold will not be selected as the base material, because pure gold is very soft, easy to wear and break, and gemstones are easy to fall off when embedded in it. Therefore, most of the rings sold in shopping malls are 18K gold, which has high hardness and can meet the use conditions as a base. In Europe and America, the most popular base is even 14K gold, which we despise at home because of its high hardness. 14K gold ring can be worn for more than 50 years, so the wedding anniversary of the elderly is called "golden wedding" in the west.
Second, pay attention to the "4C" when purchasing diamonds
Western proverbs say that "a diamond is a girl's best friend", and China also said that "a diamond lasts forever, and another lasts forever". Although many people also choose other jewels as engagement rings, such as rubies, emeralds or pearls, diamond rings are the most fashionable choice at present. Pay attention to the "four Cs" when choosing diamonds: cut-cut, clarity-clarity, color-color, carat-carat.
Cutting: The cutting of diamonds is extremely important, which directly affects the value of diamonds. Only the standard cutting method can show its brilliant light and achieve the perfect combination of clarity and color. The cut diamond is usually spherical or conical. There are many shapes of cut surfaces, such as square, rectangle, hexagon, circle and ellipse, but the most popular one is the simple hexagon, and many of its cut surfaces can better show the light of diamonds.
According to the rank from good to bad, it is shown as follows:
Sign ideal/red arrow (so-called eight arrows and eight hearts, it is best to cut) H &；; A
ideal
Excellent (advanced)
very good
okay
Cleanliness-Cleanliness: Diamonds are crystallized from mantle magma deep in the earth, which has undergone geological changes for hundreds of millions of years and has various natural traces. The color, size and position distribution of these marks have different degrees of influence on the value of diamonds. There are often defects on the surface or inside of diamonds, such as bubbles, cracks, feathers and so on. The fewer flaws, the higher the grade of the diamond. Generally speaking, the clarity of diamonds is divided into five grades and ten grades.
The difference from good to bad are:
FL, IF: the most rare, 10 times magnification is flawless, and there is no flaw inside.
VVS 1, VVS2: tiny inclusions, tiny visual differences, which are difficult for professionals to detect after magnifying.
VS 1, VS2, SI 1, SI2: micro-inclusions, microscopic visual differences, which are extremely difficult to detect with naked eyes.
I 1, I2, I3: inclusion, detectable by naked eye.
Of course, it is best to buy VVS, and usually do not consider the following VS. SI 1 at first.
Color-color: The color of diamonds ranges from precious colorless, rare light blue and pink to common light yellow. The more transparent and colorless a diamond is, the more it can wear white light ... >>
How to choose a diamond ring around 10 thousand
As we all know, how to choose diamonds is nothing more than looking at the 4C of diamonds. How important is the 4C of diamond to the value of diamond?
1, carat/weight
1 carat/card = 0.2g = 100 integral. The percentage system is only used on diamonds, and generally other gems are 0.xx carats. Under the standard bright cut, the weight and carat size of the diamond are easy to estimate. 1 0min drilling is 3mm in diameter, 6mm in diameter in 75min and 6.5 mm in diameter in1carat. In fact, there are various cutting sizes.
Small diamonds with an area of 1 min are very fine stones; The score of 10 is also very small, which can be seen in the conversation; Starting from 40 minutes, it's basically "you brought a drill ~"; 1 carat, which accounts for more than 1/3 of most sisters' ring fingers visually after mosaic, which is quite intuitive; 2 carats is 8.2mm, "so big ~"!
/kloc-comparison of 0/,2 and 3 carats
Therefore, for friends who want big diamonds due to financial constraints, they can choose inlay styles to make up for it. Simple small diamonds and large diamonds will cause considerable visual differences. You don't have to be big to have the effect of local tyrants. Therefore, there is no need to blindly pursue the number of carats and do what you can.
A simple single diamond can turn a diamond into a simple inlaid diamond, which gives people a strong visual difference. The simple design of the ring holder and the shiny solo diamonds are hard to imagine.
2. Clarity of diamonds
FL flawless grade (flawless) means that the diamond is clean under a magnifying glass 0/0 times of the gem/kloc, that is, there are no inclusions inside or outside the gem.
If there is no flaw (no flaw inside), it means that the diamond has no flaw under the 10 times gem magnifying glass, but there may be some flaws on the surface, which can be removed by polishing again.
VVS minimum flaw level refers to the smallest flaw on the bottom or surface of a diamond when observed under a 10 times gem magnifying glass. The difference between VVS 1 and VVS2 is that the latter has small cotton spots and stubble.
VS micro-flaw level refers to the tiny flaws that can be seen when a diamond is observed under a 10 times gem magnifying glass. The difference between VS 1 and VS2 is that the latter may have tiny cotton spots or cotton stubbles.
SI small defect level refers to the observation of diamonds under a gem magnifying glass of 10 times, and it is easy to see defects. The difference between SI 1 and SI2 is that the former may see defects with naked eyes, while the latter is easy to see defects with naked eyes.
P 1 grade, P3 P2 refers to the small flaws that are easy to see when a diamond is observed under a gem magnifying glass of 10 times, that is, it is easy to see with the naked eye just now, and there are obvious cleavage and cracks in some cases.
All diamonds are observed with a magnifying glass of 10 times, and only P3 can easily see the defects with naked eyes.
GIA diamond clarity grading standard defines diamonds VS 1 and VS2 as follows:
Diamond VS 1: The content is extremely small, and it is extremely difficult to see (invisible to the naked eye).
Diamond VS2: The content is very small, so it is difficult to see (invisible to the naked eye).
As for the difference between VS 1 and VS2, it depends on other qualities of the diamond (weight, cut and color). The higher the other quality, the greater the price difference. For example, the price difference between vs 1 and VS2 of 1 carat d color 3EX is about 1000, while the price difference between VS 1 carat e color 3EX and VS2 is about 700.
3. The color of the diamond
How many colors do diamonds have?
The colors of diamonds are divided into two series. Common colorless series include colorless transparent, nearly colorless and light yellow. There are also color series including dark yellow, gray, colored diamond, black and so on. Diamonds are classified according to the color set by GIA, American Gemological Institute, from "D" (transparent and colorless, starting with the initial of the diamond) to "Z" (yellow). Colored diamond is a kind of rare and extremely expensive diamond. The color grading system is not suitable for colored diamonds.
For white diamonds, it is divided into the following grades:
Colorless: d
Close to colorless: g, h, I, j
Pale yellow: potassium, lithium and manganese
Pale yellow: nitrogen, oxygen, phosphorus, phosphorus and chromium.
Pale yellow: s, t, u, v, w, x, y, z.
Introduction of Diamond Color Grades
Grade d: completely colorless. It is the highest color level among the colors of diamonds, which is extremely rare!
Class e: colorless. Only gem experts can detect trace colors. This is a very rare diamond.
Class f: colorless. A small amount of color can only be detected by jewelry experts, but it is still considered colorless. It belongs to high quality diamonds.
G-H grade: almost colorless. When compared with diamonds of higher color grade >
How to choose a diamond ring?
Teach you how to choose a wedding diamond ring
Lidiya jewellery
Buying a wedding ring may be the first time that many girls buy real jewelry for themselves. Here, I will introduce some problems that should be paid attention to when buying jewelry to help you choose your favorite wedding ring, because it should be an eternal witness of your love!
1. What metal base should I choose?
Gold and silver have been the most precious metals for thousands of years. At any time, in any country and region, these two things are hard currency with collectible value and can be used as currency. So until today, many people still use them as the main material of wedding ring base. However, in recent years, as a more precious and beautiful metal, platinum has sprung up all over the world, and its sales in stores have also jumped to the first place. Moreover, the hardness of platinum is higher, and diamonds are not easy to fall on it. There are G750 and platinum, and the price of platinum is nearly double that of G750. It is often said that PT950 and PT900 represent 95% and 90% of platinum content, while G750 is 18K gold, that is, the gold content is 75%.
In addition, two alloys, platinum and pink gold, are very popular abroad recently. These two alloys are made of gold and a small amount of other metals, and their colors are brighter, richer and more uniform than gold. There is also a kind of flower gold, that is, alloys of different colors are woven or wound into different colors and patterns, which is both beautiful and elegant, and highlights personality, which is of great treasure value.
The purity of gold is generally measured by "K". The greater the number of "K", the higher the purity, and 24K gold is pure gold. Under normal circumstances, 24k gold will not be selected as the base material, because pure gold is very soft, easy to wear and break, and gemstones are easy to fall off when embedded in it. Therefore, most of the rings sold in shopping malls are 18K gold, which has high hardness and can meet the use conditions as a base. In Europe and America, the most popular base is even 14K gold, which we despise at home because of its high hardness. 14K gold ring can be worn for more than 50 years, so the wedding anniversary of the elderly is called "golden wedding" in the west.
Second, pay attention to the "4C" when purchasing diamonds
Western proverbs say that "a diamond is a girl's best friend", and China also said that "a diamond lasts forever, and another lasts forever". Although many people also choose other jewels as engagement rings, such as rubies, emeralds or pearls, diamond rings are the most fashionable choice at present. Pay attention to the "four Cs" when choosing diamonds: cut-cut, clarity-clarity, color-color, carat-carat.
Cutting: The cutting of diamonds is extremely important, which directly affects the value of diamonds. Only the standard cutting method can show its brilliant light and achieve the perfect combination of clarity and color. The cut diamond is usually spherical or conical. There are many shapes of cut surfaces, such as square, rectangle, hexagon, circle and ellipse, but the most popular one is the simple hexagon, and many of its cut surfaces can better show the light of diamonds.
According to the rank from good to bad, it is shown as follows:
Sign ideal/red arrow (so-called eight arrows and eight hearts, it is best to cut) H &；; A
ideal
Excellent (advanced)
very good
okay
Cleanliness-Cleanliness: Diamonds are crystallized from mantle magma deep in the earth, which has undergone geological changes for hundreds of millions of years and has various natural traces. The color, size and position distribution of these marks have different degrees of influence on the value of diamonds. There are often defects on the surface or inside of diamonds, such as bubbles, cracks, feathers and so on. The fewer flaws, the higher the grade of the diamond. Generally speaking, the clarity of diamonds is divided into five grades and ten grades.
The difference from good to bad are:
FL, IF: the most rare, 10 times magnification is flawless, and there is no flaw inside.
VVS 1, VVS2: tiny inclusions, tiny visual differences, which are difficult for professionals to detect after magnifying.
VS 1, VS2, SI 1, SI2: micro-inclusions, microscopic visual differences, which are extremely difficult to detect with naked eyes.
I 1, I2, I3: inclusion, detectable by naked eye.
Of course, it is best to buy VVS, and usually do not consider the following VS. SI 1 at first.
Color-color: The color of diamonds ranges from precious colorless, rare light blue and pink to common light yellow. The more transparent a diamond is ... >>
How to choose a diamond ring
Choose the most cost-effective, the quality of diamonds is different, and the price difference is particularly large. For example, a half carat of 1.3 million is of excellent quality, and the D-color vvs is perfectly cut. Compared with one and a half carats of H-color vs 1.3 million, it is completely invisible to the naked eye, so the latter is called cost performance.
How to choose a diamond ring?
I think the most important thing is to look at the personal budget. The main factors affecting the quality of diamond ring are diamond 4C, that is, the weight, cut, color and clarity of diamond. The higher the grade, the better, and the more expensive it will be. But we are not professionals, and some grades are not very different in our opinion, so we can choose the right grade according to our own budget when choosing. Accessories, styles, brands and other items also need to be considered. Big brand stores are more reliable and the service will be better. Because I like Dr. Diamond Ring very much, the rule that a man can only customize one in his life is very romantic! The brand is determined, and there is also a clear budget. Just choose it, and it is not very tangled.
How to choose a diamond ring around 10 thousand
Hello, landlord,
You may not know it yet,
The price of this diamond ring is not simply determined by the weight.
In fact, the price of diamond ring is mainly determined by the 4C standard of diamond.
The so-called 4C standard is the weight of diamonds,
The color of the diamond, the clarity of the diamond and the cutting of the diamond.
And there are many brands of diamonds.
Brand will also affect the price of diamond ring to some extent.
As far as I know, the price of a random carat diamond is about100000 to 200000.
Even, there are millions, tens of millions ~ ~ ~
How to choose a diamond ring with high purity?
Landlord,
You may not know it yet,
The price of this diamond ring is not simply determined by the weight.
In fact, the price of diamond ring is mainly determined by the 4C standard of diamond.
The so-called 4C standard is the weight and color of the diamond.
The clarity of the diamond and the cutting of the diamond are four specific parameters.
Prepare for the trial. And there are many brands of diamonds.
Brand will also affect the price of diamond ring to some extent.
As far as I know,
The price of any carat diamond is around100000 to 200000.
Even said,
There are millions, tens of millions.
Is the diamond ring as bright as possible? How should I choose?
Yes, if the diamond is not cut well, there will be no colorful light. Without colorful light, diamonds will not be bright. The so-called cutting is actually the facet arrangement of diamonds. Diamonds themselves don't shine, and they depend entirely on the reflection of external light. The proportion of diamond facets is asymmetric. The light hitting the diamond table cannot be completely reflected on the table, so the diamond will not be bright, but will be black. It is what people call a black-hearted diamond, and whitening is the white of a fish's eye. Psychic has always attached great importance to diamond cutting. I bought it at the BLUEBOX. The brightness is good. You can go and have a look.
This is the symbol of CMA. C is the outer frame. This is the symbol of national metrology certification. With this sign, it shows that the applicant has passed th