The jade bracelet has a rough surface and can be polished by a professional jewelry store. Put the carved jadeite into a roller with grindstone for rough polishing. Generally, the polishing steps of jade bracelets include rough polishing with rollers, thread trimming, smooth surface trimming and shaping.

Maintain the jade bracelet, wipe it gently with a clean wet cloth regularly, or soak it in pure water for 30 minutes. After scrubbing, apply a small amount of white tea oil to keep the jade bracelet shiny and moist. At ordinary times, it is also necessary to avoid contact between jade bracelets and articles or hard objects containing chemical components, so as not to affect the texture and beauty. The maintenance of jade bracelets needs regular cleaning.

To raise jade bracelets, you should first clean them regularly. If the surface becomes dirty due to long-term wear, just put it in clean water, soak it for 30 minutes and then gently scrub the jade with a small soft brush. Avoid contact with oil stains.

How does jadeite meat become thinner?

If the ice seed jadeite is rough, you can improve the appearance of its coarse meat by wearing more jadeite in peacetime, or go to a professional shop to polish the jadeite to make it look more delicate and shiny. However, these practices cannot fundamentally change the essence of ice jade meat.

If the sliver is too thick, you can go to the jade processing point and re-polish it, so that the sliver can be thinned by overall polishing. However, this change is irreversible and has certain risks, which should be carefully considered.

The jade bracelet has a rough surface and can be polished by a professional jewelry store. Put the carved jadeite into a roller with grindstone for rough polishing. Generally, the polishing steps of jade bracelets include rough polishing with rollers, thread trimming, smooth surface trimming and shaping.

The first method is to reduce the ring of the jade bracelet, and the second method is to thicken the wrist. Because the ring of the jade bracelet is basically unchangeable after it is made, the reason why the ring of the jade bracelet is big can only be changed by the increase of foreign objects.

There is no way to change the roughness of jadeite crystals. Just pay more attention to maintenance during wearing. Jade maintenance involves many aspects, and the most basic maintenance is to clean jade regularly.

As far as jadeite is concerned, the abnormal means is to soak coarse-grained materials in strong acid, so that the strong acid erodes the inner layer of jadeite to form a space, and then inject colloid, which fills the inner layer of jadeite with fine-grained colloid and makes the particles look very fine.

Jade is thick and low. Can it be moisturized or refined after wearing it for a long time?

1, jade is likely to get more moist as you wear it, because oil will be produced on the surface of human body. When jadeite comes into contact with oil, it will make the surface moist and look brighter visually. Although jadeite will become more and more moist, the oil only acts on the surface layer and there is no way to penetrate it, so it will not make jadeite more and more transparent.

2. Yes, the more jadeite you wear, the more moist it becomes. Due to the excessive polishing of jade, the adsorbed water and intermolecular water on the jade surface are lost, and the surface structure is damaged to a certain extent, which is called nonmetal "fatigue", which shows that the jade surface is dry and bright.

3. Jade can be moistened if worn for a long time. Through long-term wear and friction, human sweat and oil penetrate into jade to achieve the purpose of moisturizing and maintaining jade. For those who produce a large amount of oil, it is recommended to wipe off the surface oil layer after touching the handle to avoid damaging the jade.

4, jade needs to be raised, raising jade is to wear it for a long time, so that the skin can constantly polish and polish jade. The oil secreted by the human body can nourish jade and make it more and more moist and delicate. At the same time, jadeite can be washed regularly and soaked in water properly, which helps to keep jadeite clean and moist.

How to improve the rough grinding of jade bracelets? What should I do?

1. If the surface of the jade bracelet becomes rough and no longer smooth, it can be polished to make the jade bracelet glow again. Wipe the jade bracelet with a wet towel first, then evenly apply toothpaste on the jade bracelet and polish it repeatedly 10 minute.

2. After taking it out, apply a proper amount of toothpaste to the bracelet, evenly apply the toothpaste to the bracelet with a toothbrush, and polish it repeatedly for about ten minutes. Wash it in warm water, apply a little peanut oil and rub it back and forth with a pair of glasses cloth.

3. The surface of the jade bracelet is rough and not smooth, so it can be polished in a professional jewelry store. Put the carved jadeite into a roller with grindstone for rough polishing. Generally, the polishing steps of jade bracelets include rough polishing with rollers, thread trimming, smooth surface trimming and shaping.

4. It's good to grind off the obvious unevenness, and don't grind it too hard. Then polish it with a 2000-mesh sand stick, so that it will feel smooth after polishing, and be careful not to overdo it. Use some water when polishing with abrasive belt. Then wash it and dry it, polish it with cowhide, and throw it away like other parts.

What should I do if the jadeite crystal particles are coarse?

1, the jadeite bracelet with rough and unsmooth surface can be taken to a professional jewelry store for polishing. Put the carved jadeite into a roller with grindstone for rough polishing. Generally, the polishing steps of jade bracelets include rough polishing with rollers, thread trimming, smooth surface trimming and shaping.

2. The newly bought jadeite has a rough and short surface, which is called mine shortage in the industry. This is because the crystal particles that make up jadeite are coarse and disorderly, so they can't be rounded during polishing. It has nothing to do with the manufacturing process, but is closely related to the poor quality of jade.

3. Observing the flying wing of jade needs to be carried out under strong light, which is easy to see in the sun or spotlight.

4. Jade itself is not planted with good water, and its crystal particles are coarse. Improve the color by waxing or soaking wax to make the color deeper and brighter. After wearing it for a period of time, the paraffin wax is oxidized and peeled off, and it is reduced to the original seed water of jadeite. The transparency is weakened, the ability of color transmission and mapping becomes worse, and the color becomes lighter.

5. Coarse-grained particles can be used to make jade bracelets, jade pendants, jade rings and jade bracelets.