The VS grade of a diamond refers to the grade of a diamond in terms of clarity. Simply put, the clarity of diamonds is VS grade. So, what is the status of diamond clarity VS grade in clarity grade?

What's the difference between Vs 1 and vs2? Do you know this is not for jewelry professionals? Vs 1 and vs2 both refer to the grade of diamond clarity, that is? Slight flaw? Level. Diamond clarity grades are divided into flawless grade, extremely flawed grade, extremely flawed grade, small flawed grade and heavy flawed grade. And then what? Perfect? Grades are divided into FL (flawless) and IF (internal flawless); ? Extremely flawed? The grade is VVS 1 (minimal defect) VVS2 (minimal defect); ? Slight flaw? The grade is vs 1 (micro-defect), and vs2 is in (micro-defect); ? A flaw? The grade is SI 1 (small defect) SI2 (small defect); ? Heavy defects? The grades are P 1 (first-class defect) P2 (second-class defect) P3 (third-class defect) and so on. So many people think that vs 1 and vs2 are different levels. Are they different? What's the difference between vs 1 and vs2?

FL flawless grade (flawless) means that the diamond is clean under a magnifying glass 0/0 times of the gem/kloc, that is, there are no inclusions inside or outside the gem.

If there is no flaw (no flaw inside), it means that the diamond has no flaw under the magnifying glass of 10 times the gem, but there may be some flaws on the surface, which can be removed by polishing again.

VVS minimum flaw level refers to the smallest flaw on the bottom or surface of a diamond when observed under a 10 times gem magnifying glass. The difference between VVS 1 and VVS2 is that the latter has small cotton spots and stubble.

What does diamond vvs mean?

VVS stands for the clarity of diamonds. Usually, when choosing the diamond you like, you should look at the diamond 4C, namely: cut, color, clarity and carat.

Clarity refers to the relative degree of diamond clarity characteristics observed by trained diamond graders with normal vision under the artificial standard light source of D55 or D65 with a magnifying glass with achromatic optical distance of ten times.

Using 10 times magnifying glass to observe the number, distribution and size of internal and surface defects of diamonds and their effects on diamond luster, which can be divided into LC, VVS, VS, SI, P, * * * and 10.

Generally speaking, diamonds are crystal clear, but in fact, most diamonds contain tiny inclusions. They are the result of the variation of surrounding environment and the invasion of other crystals during the development and crystallization of diamonds.

Although most diamonds contain inclusions, these inclusions will not affect the beauty of the diamond itself. Of course, the smaller the inclusions, the lower the influence on the penetration of light inside the diamond, and the more beautiful the shining light of the diamond will be.

As can be seen from the above classification of clarity grades, the vvs grade is one grade higher than the vs grade. Experienced jewelers observe with a magnifying glass of 10 times. Generally, it is judged that diamonds that are extremely difficult to find defects are VVS grade, and diamonds that are difficult to show defects are VS grade. Generally speaking, as long as the purity of a diamond is higher than P, that is, the inclusions do not hinder the penetration of light, the impact on the value of the diamond will not be too great, especially the beauty of the diamond we see with the naked eye. Therefore, for an ideal cut SI-grade diamond, its contents need to be carefully observed by experienced people with a magnifying glass of 10 times. And untrained non-professionals can't distinguish these inclusions with the naked eye.

Which is better, diamond clarity vs or vvs?

The vvs grade is one grade higher than the vs grade. Experienced jewelers observe with a magnifying glass of 10 times. Generally, it is judged that diamonds that are extremely difficult to find defects are VVS grade, and diamonds that are difficult to find defects are VS grade. Generally speaking, as long as the purity of a diamond is higher than P, that is, the inclusions do not hinder the penetration of light, the impact on the value of the diamond will not be too great, especially the beauty of the diamond we see with the naked eye. Therefore, for an ideal cut SI-grade diamond, its contents need to be carefully observed by experienced people with a magnifying glass of 10 times. And untrained non-professionals can't distinguish these inclusions with the naked eye. In daily life, the wearer of diamond jewelry may not look for it with a magnifying glass 10 times? Tolerance? What attracts people's attention is the brilliance and light of diamonds. Under the condition that the budget for buying a diamond ring remains unchanged, I suggest you consider the size, cut and color of the diamond first, and then consider the purity. A diamond with high purity, if the cut and color are not good, the beauty and price will also be seriously affected! ?

What does the diamond ring vs introduced above mean? Do you know which is better, diamond clarity vs or vvs?