Jade can't be returned if it buys tin foil. Jade pendant, bought, dissatisfied, expensive, can be returned, but there are ways and routines: 1, collect purchase vouchers, receipts, receipts and invoices. 2. Try to restore the packaging so that the merchants will not affect the secondary sales. 3. Apply for a refund on the grounds of discomfort.

Non-toxic and safe. The foil of the jade pad is non-toxic and safe. Tin foil paper is a unique handicraft in Shaoxing in the early years. In ancient times, its main purpose was to make money to worship ghosts and gods. Now there are many other uses, such as sealing.

The back cover of the jade ring is usually inlaid, and the beauty will be higher if it is pasted with foil. For jadeite with relatively good water, the back cover can also improve the light transmittance of jadeite, make jadeite look brighter and brighter, and make jadeite more ornamental.

How to stick a jade bracelet with fine lines?

First of all, we don't pay attention to bumping when we wear it everyday. At this time, we can draw parallel lines on the jade surface with our nails. If there is a sudden feeling, it must be caused by people in the later period, which makes the jade crack.

Jade bracelets have patterns, which can be carved, and the cracks are carved into a unified picture, so that the cracks can be integrated into the carving. Jade bracelets have patterns and can also be covered. Ingeniously enlarge the cover, and add some skills such as ornaments, gold inlays, pendants or back covers to the broken surface of jade.

Conventionally, 24K cloisonne inlay is used to repair and gently cover up the defects on jade.

The transverse crack of the bracelet can be treated by sticking gold ornaments on the surface, or it can be repaired by inlay.

Cracks in jadeite bracelets can be repaired by methods such as fracture bonding, gold tracing and re-trimming. Fracture bonding: first paste with high-efficiency adhesive, and then erase with acetone. Gold tracing: generally, patterns are carved along the cracks to beautify them, and then gold wires are embedded in jade.

How to process jadeite B goods

The jadeite treated by B generally chooses the jadeite with middle and low grade, medium and coarse grain structure and many cracks. For example, raw materials such as bean seeds, cyanine, cyanine on white background, etc., while jadeite with fibrous fine-grained structure and few cracks is generally not treated.

Put the heated and melted glue into a vacuum pump filled with dry materials, and slowly reduce the negative high pressure, and the glue will be pressed into the dry materials by atmospheric pressure. Cooling raw materials, carving and processing.

The processing technology of jadeite B goods is generally as follows: the raw materials or finished products of jadeite are soaked in strong acid and other chemical solvents, including aqua regia prepared by concentrated hydrochloric acid and concentrated nitric acid. This is done to disperse or even dissolve the impurities, low transparency and unsightly substances in jadeite, which is conducive to filling other colors.

How to pack jadeite

Jade is recommended to be stored in a cool and humid place to avoid the situation that jade is too dry and thus lacks water. You can also coat a layer of oil on the surface of jade during storage, and then put it in a sealed bag for packaging and storage.

Increase the gloss: This plastic wrapping paper will reflect light, so it will be projected on the bracelet, which will visually improve the gloss of the jade bracelet and make the jade look brighter and more dazzling. Convenient storage: the wrapping paper is specially made and has a certain thickness, which can prevent the bracelets from rubbing and colliding with each other, causing the bracelets to be damaged.

Unused emeralds need to be placed in a relatively closed and humid environment to avoid being placed in an excessively dry place or exposed to the sun for a long time.

After oiling, put the jadeite in a sealed bag for packaging and storage. Store separately; Jade is recommended to be stored separately to avoid being put together with other precious stones. Because the hardness of each gem is different, if jadeite is stored with other gems, it is easy to damage jadeite, thus affecting the quality of jadeite.

Delicate, soft, shiny and translucent, with good oil resistance and air tightness, it can protect and maintain the jade bracelet when wrapped. At the same time, the paper has strong tensile force and can withstand repeated folding without damage, so it cannot be used. The four corners of the waxed paper are overlapped, and the inner side of the wrapping paper is sewn with a needle and thread along the ring of the bracelet and fixed.

Is it cheating consumers to put tin foil in jade to make it more beautiful?

This is definitely cheating consumers. There are many such businesses now, but I don't know if I can defend my rights. You still need to find a reliable merchant to buy jewelry like jade. You should earn more than ten times if you make a rough estimate.

The back cover of the jade ring is usually inlaid, and the beauty will be higher if it is pasted with foil. For jadeite with relatively good water, the back cover can also improve the light transmittance of jadeite, make jadeite look brighter and brighter, and make jadeite more ornamental.

Look at the texture: the quality of jadeite can be distinguished by looking at the texture, which refers to the roughness of jadeite meat, while jadeite with better quality will have a better texture and a more delicate feel. On the contrary, the worse the texture of jadeite, the rougher the feel will be.

Look at the sculptor's appraisal method of jadeite. In addition, the level of carving technology is also a factor to measure the quality of jadeite. If the jade carving is fine, the pattern on it looks lifelike, giving people a vivid feeling, which indicates that the price of this jade will be high.

Put the baking tray in a preheated oven, heat it up and down 170 degrees, and cover the middle layer with tin foil for about 18 minutes. The freshly baked cookies still feel a little soft. Bake it in a baking tray for a while, then transfer it to a baking net and cool it thoroughly after it hardens. Chop dried cranberries and nuts for later use.

How is the fake jadeite original stone made? What is the fake jadeite original stone pretending to be?

1, fake skin. There are many reasons for this kind of fraud, and it is also deceptive. Generally speaking, the reason for this fraud is nothing more than covering up the essence of jade to achieve the purpose of cheating. The method of counterfeiting is to break the weathering layer of some jadeite shells, and then stick some quartz sand on the surface of jadeite original stone with glue.

2. To make fake skin, it is mainly to crush the weathered layer of some jadeite skin shells, and then stick some quartz sand on the surface of jadeite original stone to cover up the essence of jadeite. Pseudo color is usually made by electroplating, coloring or firing, so as to cover up the defects of the original stone and use the defective products as superior products.

3. The original jadeite stone can be faked. 1. Fake leather is to smash the weathering layer of some jadeite shells, and then stick some quartz sand on the surface of jadeite original stone with glue, thus telling the essence of jadeite. Cover, so as to achieve the purpose of deception.

4. Make false colors skillfully. A certain area of the fake original stone is artificially dyed to green or an appropriate color. This clever color is mainly green, because the profit is higher after dyeing green. The identification method carefully observes the color silk, color block and color head to see if the color feels natural and exaggerated. Open the patch.

5. There are four kinds of fake jadeites: jadeite with patches, jadeite with special toothpaste, jadeite with shell packaging and jadeite with tin foil on the outer layer. Pseudocolor class.