Jade bracelets can be dipped in wax if worn for a long time. Heat a cup filled with paraffin wax to melt it, soak the jadeite product in the melted paraffin wax for a few minutes, and then scrub it with a towel or brush.

It is necessary to clean the jade bracelet regularly, which can help you clean the dirt on the jade surface and replenish water to the jade in time. It contains not only some trace elements, but also water. These moisture can make the luster of jade more beautiful, and also make the jade bracelet more full.

Polishing If the jadeite is seriously worn or scratched, it is recommended to take it back to the jadeite factory and let the master polish it. At this time, the polishing should be light, skillful and economical, and the integrity of the jade ring surface should be preserved to the maximum extent. 2. Polishing and waxing. If the jadeite is not seriously worn, it is recommended to take it back to the jadeite factory to be polished by the master and then waxed.

The interior of the jade bracelet bought is not polished smoothly. Is there any tool that you can polish yourself? How to polish it finally? ...

1, jadeite hardness 66-7, stainless steel hardness 5, it is not easy to polish by yourself. You can just find a place to polish it. They have a polishing program in the polishing process, so it is more convenient to polish you directly and go to polishing cloth directly.

2. First put the jade bracelet in warm water 10 minute. Put some toothpaste on the back of the jade bracelet. Brush evenly with a toothbrush, and brush and grind repeatedly for about 10 minute. Wash it with warm water again. After washing with warm water, apply a small amount of peanut oil.

3. Emerald bracelets are usually polished with oilstone, sandpaper, brush, cleaning and waxing.

4. Polishing powder: Apply a proper amount of polishing powder to jade. Preliminary grinding: brush back and forth with a hard brush for about 5 minutes. Secondary polishing: apply another layer of polishing powder and polish it repeatedly with soft cowhide for about 10 minute. Cleaning: clean and wipe the polishing powder with alcohol.

5. Preparation tools: polishing powder, low-power hand-held grinder, animal skin, brush, polishing sandpaper, toothbrush, toothpaste, peanut oil and non-slip gloves. Polishing paper must be of good quality. The recommended specification is 600× 1200× sandpaper. Fine sandpaper particles are not easy to damage jadeite.

6. You may need polishing powder, brush, polishing sandpaper, non-slip gloves, toothbrush, toothpaste, animal leather, peanut oil and low-power hand-held grinder to polish jadeite at home. Fine sand particles are recommended for polishing paper, which is not easy to damage jadeite.

Is there any good way to deal with the unsmooth polished jade bracelet?

Jade bracelets are no longer smooth after being worn for a long time, but they can be polished to reproduce their luster. Minimalist polishing method. After taking it out, apply a proper amount of toothpaste to the bracelet, evenly apply toothpaste to the bracelet with a toothbrush, and polish it repeatedly for about ten minutes. Wash it in warm water, apply a little peanut oil and rub it back and forth with a pair of glasses cloth.

If the surface of the jade bracelet becomes rough and no longer smooth, it can be polished to make the jade bracelet glow again. Wipe the jade bracelet with a wet towel first, then evenly apply toothpaste on the jade bracelet and polish it repeatedly 10 minute.

The surface of the jade bracelet is rough and not smooth, so you can find a professional jewelry store to polish it. Generally, the grinding and polishing steps of jadeite bracelets include drum rough polishing, thread trimming, smooth surface trimming and shaping. Put the carved jade bracelet and a certain amount of polishing powder into a roller with a grindstone, and then inject a proper amount of water.

How to improve the rough foundation of jadeite jade

1. After the jadeite is polished from the original stone, it is polished with coarse sandpaper for many times, then with slightly finer sandpaper, then with fine sandpaper, and then with polishing sandpaper. Finally, it can be finished by polishing with cloth.

2. If the ice jadeite is rough, you can improve the appearance of its coarse meat by wearing more jadeite at ordinary times, or go to a professional shop to polish the jadeite to make it look more delicate and shiny. However, these practices cannot fundamentally change the essence of ice jade meat.

3. In the process of wearing jade, don't engage in activities that are too big and easy to bump. It is also necessary to avoid the danger of falling off during the process of taking off and putting on the jade bracelet. If the jade is broken, not only will its value be greatly affected, but it will also be extremely difficult to recover! Emerald belongs to high pressure and low temperature jade.

4. There is no way to change the roughness of jadeite crystal. Just pay more attention to maintenance during wearing. Jade maintenance involves many aspects, and the most basic maintenance is to clean jade regularly.

5. The surface of the jade bracelet is rough and not smooth, so it can be polished in a professional jewelry store. Generally, the grinding and polishing steps of jadeite bracelets include drum rough polishing, thread trimming, smooth surface trimming and shaping. Put the carved jade bracelet and a certain amount of polishing powder into a roller with a grindstone, and then inject a proper amount of water.

6. You can't lose weight if you wear it. If you just bought it, you can go to the store and change it into a suitable bracelet and a smaller ring. If the sliver is too thick, you can go to the jade processing point and re-polish it, so that the sliver can be thinned by overall polishing. However, this change is irreversible and has certain risks, which should be carefully considered.

How to deal with the worn surface of jade bracelet?

1. Jade bracelets can be dipped in wax if worn for a long time. Heat a cup filled with paraffin wax to melt it, soak the jadeite product in the melted paraffin wax for a few minutes, and then scrub it with a towel or brush.

2. If the jade bracelet has a very slight scratch, you can apply a little toothpaste to the scratch and then wipe it with a soft cloth, and the scratch will become less obvious.

3. If the jade bracelet jewelry is worn or scratched, you can apply some wax to the jade bracelet jewelry and bake it with fire. After the wax melts, wipe it with a clean towel. In general, wear or scratches can be repaired with wax.

4. The wearing of jadeite bracelets is an inevitable problem in long-term wearing, but it can nourish jadeite regularly and keep it lubricated.

5. Waxing regularly can maintain jade bracelets. You just need to buy ordinary ash in the supermarket, and there is no special maintenance oil. Please click on the input picture to describe that waxing treatment has two advantages: covering up some tiny cracks on the jade surface. Protect the moisture inside jadeite. At the same time, it increases the transparency of jadeite.