1, jadeite is very dry and can be moistened with water. Soaking jadeite in water for dozens of minutes can make water molecules slowly penetrate into jadeite, thus making jadeite look more moist and full, and more delicate and transparent.

2, the jade bracelet is very dry, you can choose to replenish water first, and the jade bracelet needs to ensure its moisture and moisturizing. If you can keep the jade bracelet moist. After smearing, wrap it with plastic wrap, put it in a jewelry box with sponge pad and put it in a cool place.

3. If the jadeite is relatively dry, it should be sent to a regular shop for cleaning in time, and the yellow and dry jadeite should be waxed and polished. In addition, some rough stones turn yellow not because of varieties, but because of oxidation, and can be restored to their original state after polishing.

4. Otherwise, it is easy to cause the filler (glue) in jadeite to age and deteriorate, and at the same time, it can also make the iron rust spots oxidized again after acid treatment. In addition, don't put jade jewelry in the box for a long time. After a long time, jade bracelet jewelry will lose water and crack.

5. You can gently wipe it with a soft cloth when soaking. If it is a jeweler's jewelry, you can gently brush off the dirt on the surface with a soft brush and the luster will reappear. After the jadeite is dried, it should be sent to a regular shop for cleaning in time, and the jadeite that turns yellow and dries should be waxed and polished.

Can the dried jade bracelet be restored? What should I do if the jade bracelet dries?

The jade bracelet is very dry, so you can choose to replenish water first. Jade bracelet needs to ensure its moisture and humidity. If you can keep the jade bracelet moist. After smearing, wrap it with plastic wrap, put it in a jewelry box with sponge pad and put it in a cool place.

Soak in water to remedy. Soak jade in water to make up for its lost moisture. Specific practice: put the jade in pure water, soak it for about one to two hours, then take it out and wipe it clean with a dry soft cloth. Maintenance fluid maintenance.

Jade is very dry and can be soaked in water to moisten it. Soaking jade in water for dozens of minutes can make water molecules slowly penetrate into jade, thus making jade look more moist, full, delicate and transparent.

If the jadeite is dry, it should be sent to a regular shop for cleaning in time, and the jadeite that turns yellow and dry should be waxed and polished. In addition, some rough stones turn yellow not because of varieties, but because of oxidation, and can be restored to their original state after polishing.

Jade and jadeite pendants should be regularly soaked in clean water and natural vegetable oil, olive oil, walnut oil or white tea oil and baby oil (a mineral oil), cleaned, moistened and maintained. It is best to maintain it once every six months or so.

How to make jadeite moist

To make jadeite moist, it is necessary to avoid high temperature exposure, regularly clean and replenish water, and wear it for a long time. Jade is a polycrystalline structure, so it is easy to cause cracks in the internal structure of jade and lose its luster under high temperature or sunlight.

If jadeite wants to become moist, it is necessary to pay more attention to maintenance and clean jadeite every day. Soaking and cleaning jadeite with water can keep jadeite fully hydrated. Soaking jade in water is not only of great help to the maintenance of jade, but also can improve the quality of jade to some extent.

Spray water. When jadeite is preserved, you can spray a little water on the surface of jadeite from time to time to let jadeite absorb water and keep it moist. After the jade is sprayed with water, the water stains on its surface should be wiped clean with cotton cloth to prevent the residual water on the jade surface from affecting the appearance.

The ways to make jadeite more and more moist are: soaking in water regularly, generally soaking in clear water for more than half an hour at regular intervals, which can keep the luster and moist of jadeite in dry season or in an environment where the air is too dry. Generally, jadeite is soaked in clear water for more than half an hour regularly, which can keep jadeite bright and moist.

To make jadeite more moist, it needs to be cleaned regularly. After being placed or worn for a long time, jade will accumulate a lot of dust and dirt on its surface. Regular cleaning will help to keep jadeite clean and beautiful.

To make jadeite moist, it is necessary to avoid high temperature exposure, regularly clean and replenish water, and wear it for a long time. Storage at high temperature or open flame burning should be avoided to avoid losing the moisture of jade, thus affecting the texture and color of jade. If you are exposed to oil pollution for a long time, oil pollution will easily gather on the surface of jade jewelry, which will affect the luster of jade jewelry.

What should I do with jadeite when it is dry?

1, soaking water remedies First of all, soaking jade in water may replenish the missing water. Specific practice: put the jade in pure water, soak it for about one to two hours, then take it out and wipe it clean with a dry soft cloth. This may replenish the water that is missing inside.

2. If the jadeite is relatively dry, it should be sent to a regular shop for cleaning in time, and the yellowed and dried jadeite should be waxed and polished. In addition, some rough stones turn yellow not because of varieties, but because of oxidation, and can be restored to their original state after polishing.

3, the jade bracelet is very dry, you can choose to replenish water first, and the jade bracelet needs to ensure its moisture and moisturizing. If you can keep the jade bracelet moist. After smearing, wrap it with plastic wrap, put it in a jewelry box with sponge pad and put it in a cool place.

4. The most direct way for jadeite to "replenish water" is to soak in water. Take bottled purified water and pour it into a container. Put the emerald part in. The water level is higher than that of jade. Soak for an hour or two, not for long. Take it out after soaking and dry it with a soft cloth.