Current location - Plastic Surgery and Aesthetics Network - Jewelry brand - Six ways to take out the stuck piston ring
Six ways to take out the stuck piston ring
Directory method 1: common method 1. Gently place your index finger on the ring and your thumb on the bottom. 2. Don't push the pull ring too hard, otherwise the pull ring. Method 2: lubrication method 1, use lubricant 2, rotate the ring back and forth method 3: pulling method 1, raise your hand. Method 4: cold water method 1, cold water soaking method 5: flossing method 1, and put one end of flossing under the ring. 2. floss around your fingers. 3. untie the floss. 6. After cyclization, 1. Clean up the place where you wear the ring and those damaged places. After all your efforts, you still can't take the ring off your hand? I thought it was suitable when I took it, but when I took it off, I found that I couldn't take it off? Don't panic, and don't cut off the ring in a hurry. There are some simple ways to take it off safely.

Method 1: Common methods

1, put your index finger gently on the ring and your thumb under it. Start turning the ring back and forth gently and pull it out slowly at the same time.

2. Don't push the pull ring too hard, otherwise the pull ring. Otherwise, it will make the hand more swollen and the ring more difficult to take out.

Method 2: Lubrication method

1, use lubricant. Many skin care household products can be used as lubricating oil, so that you can get rid of the ring unscathed. Some alkaline detergents containing ammonia (such as Wenjie) usually have the best effect. If your skin is damaged or scratched, choose your lubricating oil wisely. Otherwise, try the following method and apply it to the joints of your hands in large doses. vaseline

Stable cleaning or other window cleaners

Professional jewelry stores usually use this. Please read the instructions on the bottle before using it to ensure that it is harmless to the skin.

Hand cream-hand cream has the best effect

Butter.-If possible

Conditioner/shampoo

Vaseline oil or antibiotics

(If the skin is damaged, this is the best choice)

Cooking oil spray, soft butter or cooking oil.

Butter (lard)

Peanut butter-slippery but not thick! ! It may be a little sticky, but it can be effectively removed.

suds

Baby moisturizing oil

Cyclic relaxant

2. Turn the ring back and forth and apply some lubricant under it. Turn the ring back and forth on your finger once or twice while spraying or rubbing more lubricant on it. You need to gently pull the ring off your finger and turn it back and forth when you pull it out.

Method 3: lifting method

Hands up. If you still can't take off the ring, try raising your hand over your shoulder for a few minutes.

Method 4: cold water method

1, cold water soaks your hands. Do you find that your ring is looser in cold weather than in hot weather? Put your hand in cold water, but not cold water, and then soak it for a few minutes. You don't need to soak your hands until they hurt.

Method 5: Flossing method

1. Put one end of dental floss under the ring. You can string dental floss under the ring with a needle if necessary.

2. Floss out your fingers and wrap them around your joints. Wrap it tightly, but don't entangle your fingers or make them blue. If it's too tight, just relax.

3, untie the floss, starting from the root of the finger. When you start to remove dental floss from the root, your ring will keep moving forward and you can remove it in a short time. If the ring is only pulled out a little: repeat the first two steps at the current position.

Method 6: After taking off the ring,

1, clean up the worn and damaged parts of the ring. Don't put the ring back until your hand is back to its original size, or until the swelling subsides.

Tip: If your ring is stuck because the skin of your joints is wrinkled, hold the ring with your thumb and middle finger, and then tighten the skin of your knuckles with your index finger so that the skin will be under the ring. Let the ring slide over the knuckles with jointed skin.

If you still can't take off the ring in various ways, take a metal file and start filing one side of the ring. This may take some time, but when there is a gap in the ring, you can extend another ring and take it off.

If the ring is not glued firmly, there is a simple way to take it off with the help of others. Usually, the reason why the ring is stuck is that the skin between the joint and the ring is wrinkled, so if you can smooth the skin, you have a chance to take off the ring quickly. Just ask someone to flatten the skin under your ring onto your hand, and at the same time you pull the ring out of your (lubricated) finger.

If your ring must be cut off, any expert jewelry store knows that you have to wait at least two weeks before you can energize your finger so that it can recover.

Take a long cold bath, or go outside to lower your body temperature when it is cold. Of course, don't go too far.

Be patient. If you can't take off your ring at once, don't panic. It takes a little time to take off the ring, and you may have to try different methods.

This method is very useful when you want to take off your ring when your finger is swollen in the morning.

When the ring reaches the joint, press hard and move as far as possible to the bone joint. This makes it easier for the ring to slip out of the joint.

Don't worry if you need to cut off the ring. It only takes a few seconds, and there is no harm, and the ring is easy to repair. Don't hurt your finger because of an inappropriate ring. In fact, you just need to go to the hospital, the fire station, or a good jewelry store. They'll take it off for you.

If you must cut off the ring yourself, here are the steps. Try to put a popsicle or toothpick between the ring and your skin to protect your fingers. Carefully and slowly cut a groove in the ring with a needle file. Needle files can be bought at any hardware store.

Bending your fingers often with a ring can reduce the wrinkles of your knuckles, and your knuckles will be slightly smaller.

If you haven't measured your fingers recently, go and measure them. It will change as you get fat or thin or get old. Any jewelry store has a set of tools for measuring finger inches.

Warning: If your finger is injured or swollen, please seek help immediately. Don't pull out the ring when you think your finger will hurt.

Your local jewelry store should also have tools to cut your ring. Once they take off the ring for you, they can repair it and re-measure your size, but only after your finger heals, which will take at least two weeks. It's best to go to a store with a maintenance department, because they will know what they want to do.

Some types of window cleaners may contain ammonia, which may damage metals and gems. Look at it!

If your finger is black and blue and you still can't get the ring off, go to the emergency room or the nearest fire station at once.

Most fire stations and emergency rooms have tools that can cut the ring in a few seconds, but you can still take the ring to the jewelry store for repair.

What you need is stable cleaning or other amino window cleaners, anti-inflammatory ointment, vaseline, conditioner, butter, cooking oil, cooking oil spray, hand cream, vaseline oil, ghee or soapy water.

cold water

dental floss

Release ring