Extended data:
After-sales service cities: Beijing, Shanghai, Guangzhou, Shenzhen, Tianjin, Wuhan, Nanning, Hangzhou, Nanjing, Jinan, Chongqing, Chengdu, Ningbo, xiamen, Wuxi, Suzhou, Xi 'an, Changsha, Fuzhou, Shijiazhuang, Hefei, Taiyuan, Foshan, Zhuhai, Zhongshan, Dongguan, Huizhou, Huicheng, Zhaoqing and Qingyuan. Nanchang, Shaoguan, Kunming, Guiyang, Lanzhou, Shenyang, Zhuzhou, Changde, Guilin, Liuzhou, Fuqing, Yuyao, Cixi, Xingtai, Langfang, Datong, Dalian, Qingdao, Harbin and Quanzhou.
1. Fault analysis of wall-hung boiler in forest: low water pressure, filter screen blockage, low water pressure or filter screen blockage during equipment use will cause fire. Check the water pressure of the equipment first, and adjust it appropriately if there is any problem. Under normal circumstances, the water pressure value is 1 ~ 1.5 bar; If the filter is clogged, just clean the filter.
2. The ignition electrode and the flame induction electrode have serious carbon deposition, and the work of the wall-hung boiler is the water in the heating furnace, which will be circulated to various places after heating. Among them, ignition electrode and flame induction electrode are very important. If one of them has problems, the wall-hung boiler will not catch fire. The common problem is that we usually neglect maintenance, which leads to the serious carbon deposition of the above two items, so that the wall-hung boiler can't catch fire when it is used. This requires us to contact the brand after-sales personnel for cleaning and maintenance, so regular cleaning and maintenance of the wall-hung boiler can not only prolong the service life, but also ensure normal heating.
The gas pipeline is blocked. At present, most users use wall-hung boilers to burn gas. If the gas pipeline is blocked, it will also cause misfire. For example, the gas pipeline is blocked, the capacity of the gas meter is insufficient, and the gas valve is not opened, which will affect the start of the wall-hung boiler. If the wall-hung boiler at home doesn't catch fire, see if it's caused by gas. If there is any problem, recharge the gas meter, open the gas valve and replace the gas meter battery again for maintenance.
4. Electromagnetic valve problem. When the wall-hung boiler starts to ignite, it hears a tinkling sound, but there is no magnetic attraction of the electromagnetic valve, which is due to damage or aging. This part got out of control at work. Although it can catch fire, it will go out soon, so the solenoid valve needs to be replaced. Another phenomenon is that one end of the plug-in wire of the solenoid valve is rusted, which leads to poor contact, so that the equipment can not catch fire, and only the rusted place needs to be cleaned.
5. The smoke pipe cannot exhaust normally. The flue pipe mainly discharges the waste gas in the wall-hung boiler. If there is something wrong with the smoke pipe, the wall-hung boiler will not work normally. The problem of smoke pipe is generally blocked because it has not been cleaned for a long time. If there are too many jams, it will easily affect the normal work of the wall-hung boiler. In this case, it is only necessary to clean the pipe. There is also the phenomenon that the installation in the early stage is not standardized, which leads to the phenomenon that the smoke pipe is too long and the exhaust gas is difficult to discharge. If the smoke pipe at home is like this, it can't be modified at will, and professionals should be invited to repair it.
Wall-hung boiler is the core of heating system and needs long-term operation. Regular maintenance, inspection and cleaning are very important to ensure that the wall-hung boiler can operate normally and its service life will not be shortened.