1. Insert the inner ring into the plate finger to reduce the internal size. If Hetian jade has a big finger, go to a gold shop or a jewelry store and insert an inner ring at the plate finger according to the size of the finger, but if possible, you can choose a professional storefront. If it's broken, it's broken

2. Winding the coil. I believe many people know this method. Buy some cord to wrap around the inside of the ring. Silver rings can use gray lines, and gold rings can use red lines. Then fill the pores. Record it. You can also use plastic wrap instead.

3, but if it is really much bigger, it will be changed, because it will be uncomfortable to sprinkle it. Moreover, it is dangerous to fly away when the finger is pulled, and it is easy to go off when it spreads.

How to make Hetian jade pull her finger too big?

1. This pendant is too big to hold. You can change it to the right size with your own tools.

2. For example, the Hetian jade carving snake above is not advanced if it is used as an ordinary pendant on the head. Jade sculptors use circling body holes to hang ropes, which not only makes animals look full of gas, but also solves the problem of hanging ropes. Really addictive.

3, there is no way to change it into a suitable size. You can tie other threads or ropes on the bracelet and wrap them around it. Because the rope will increase the thickness of the bracelet. Accordingly, the length of the circumference is reduced. It doesn't fall easily. The average jade bracelet will only be a fixed size, and there is no way to change it.

4. The reason why they are all worn on the right hand is because in ancient times, when people were shooting arrows, they all used their right hand to pull the string and their left hand to hold the bow, which can protect the string-pulling hand well. However, some people wear a jade finger on their left hand to protect the thumb of the hand holding the bow and arrow, each with its own merits.

5, basically impossible, the bracelet is easy to break, it is estimated that no master has this grasp. Unless you find a top expert.

6. The general steps are as follows: 1. Take Hetian jade's finger under natural light, take some clear photos from multiple angles, upload them, and indicate the diameter, thickness, gram weight and other data of the ring. 2. Go to Taobao to make a trading link and mark the price you like (you can refer to jade and other people's links for how to do the link).

What if the emerald ring is too big?

1, bypassing method: this is a traditional method, which is commonly used by the older generation.

2. When the ring is large, a layer of soft string can be wrapped around the outer ring of the ring to increase the thickness of the ring for reinforcement. Pay attention to the thickness when winding the coil, which can fill the gap between the finger and the ring.

3, winding method, choose your favorite rope, winding a section on the bottom side of the ring, so that you can't see it below, but because winding the rope shortens the diameter of the ring, the ring can also be firmly worn on our hands, generally not easily fall off.

4, find a professional maintenance, the ring can be directly taken to the store to change the size, professional jewelry stores generally cut off a part of the ring by cutting gold, and then weld and polish it to reduce the size of the ring.

If you just bought it, you can negotiate with the seller to change the code. If you can't change it, it's good to wear it as a necklace. Some time ago, my friend gave me a ring of Emerald Lulu. It looks good, but it's a little big. I just wear it as a necklace.

6. When the ring is big, it can be shrunk by washer, gold cutting and winding. Washer Washer is a simple way to replace the ring, but it is only suitable for small rings. The process is to make a washer with the same color as the original ring holder and then put it on the inner ring of the ring.