2、? Then press the "8" key, because the maximum weight of this scale in my hand is 7.5kg, so the weight column will appear CAP, and a single weight column will appear 75,000. You can ignore this step and press the "Add" button to enter the next step.
3. The next step is perception. Weight column display: d 1, single column display: 2. On behalf of me, the precision of this scale is 0.2g, and then press the "add" button to enter the next step.
4. Decimal digits are displayed at this time, and the default factory value is enough, which can be ignored without operation. Press the "Add" key to enter the next step.
5. At this time, the weight value will appear, which is more important. Enter as much weight as you have in your hand, and remember to keep decimal places. For example, if my weight is 5000g, I will enter 50000, because there is a 0 after the decimal point. If only 5000 is entered, only 5000 will be displayed after calibration, with no decimal point. After the input is finished, press the "Add" key to enter the next step.
6. At this time, the weight column will appear: LCP, and the single column will appear: OFF. If a single column appears: On, you need to press the "zero" key and press "Off" to appear. Then press the "Add" key to enter the next step. A code (Figure 2) appears, which can be ignored, and then press "Accumulate".
7. Weight column appears: CAL, single column appears: 0, and weight value appears in total column. Prepare the weights, and then press the "Add" button to enter the next step.
8, put away the weight, wait for a few seconds after the electronic scale will automatically correct. When the weight of the weight bar jumps, it means that the correction is completed.
Extended data:
Matters needing attention in the use of electronic scales:
1. Please don't move the platform of the electronic scale at will.
2. Check the balance of the platform regularly. If it is tilted or suspended, please adjust it to the horizontal position in time.
3. When weighing large-tonnage goods, please pay attention to the rising and falling speed, and don't knock the scale to avoid unnecessary damage to the scale. ?
4. During normal use, please put the weighed items in the center of the scale as much as possible. If you weigh with a corner of the scale for a long time, it will have a certain impact on the sensor. When the goods are put aside, the four sensors of the scale are unevenly stressed, and the calculated values after comparison will have a deviation of 1 ‰ from the calculated values when the four corners are uniformly stressed.