Ab glue is composed of two kinds of glue with strong adhesion. Epoxy resin AB adhesive is a two-component epoxy resin adhesive, which not only has high adhesive strength, high hardness, high chemical resistance, but also has anti-yellowing effect. Even if it is scraped on the vertical plane or ceiling, it will not sag, and it is moderately dry, safe and environmentally friendly.

Ab glue can be used in many kinds of materials, such as metal plastics, magnet acrylic, crystal ornaments, handicrafts, stainless steel and iron, and hardware abs. Used to manufacture and repair broken benches, fallen antiques, metal hooks, digital technology, instruments, etc.

Matters needing attention in using ab glue:

1. The workshop and the instruments used must be kept clean, otherwise the quality and bonding effect of glue will be affected, especially the oil stain and dust will affect the transparency and adhesion of glue drops. The indoor humidity should not be too high. Try to keep ventilation or have an exhaust fan. People should wear slippers or shoe covers when walking. When the indoor air is too turbid, a small amount of water droplets can be sprinkled on the ground.

2. Try to keep the room temperature at 25℃ in the glue dripping workshop, which has a great influence on the available time and curing time of glue. In addition, when turning on the air conditioner, it should be noted that the water mist at the air outlet directly falls on the surface of the adhesive layer and reacts with component B, resulting in white mist, oil stain and particles.

3. The glue dropping workbench should be as smooth as possible to avoid glue flowing, glue exposure, improper glue dropping and uneven glue dropping. You can use a balance instrument and a balance ruler to debug first.

The above contents refer to Baidu Encyclopedia -AB glue.