1. Start forging the prepared silver. Pay attention to the need for continuous annealing after forging in the middle, and slowly make it into the shape of a golden hoop.

2. After forging many times, the stick was deformed. Proceed to the next step: grinding, hold the mold with a file and then grind it with coarse and fine sandpaper.

3. After the material is formed, start drawing patterns. If you don't understand it very well, you can draw a picture on paper first and then stick it on it with a glue stick.

When the pattern is ready, the carving begins.

5. When carving and spiral carving, the wrist should move flexibly with the lines. If you are not careful, the angle of the curve will be crooked, and the lines should be consistent in depth and uniform in thickness.

6. After the carving is completed, repair the nicked silver scraps with a file, and then polish them with sandpaper.