Installation/replacement of thermal printing paper:
1 Open the paper cover at the top of the machine, put in the paper roll according to the illustrated style, and close the top cover, as shown in the figure:
2 Tear off the exposed excess paper segments. As shown in the figure:
Key points:
The paper head extends out from below the groove, and the paper head is pulled out for a while;
After loading the paper, confirm whether it is positive or negative, push the exposed paper section up flat, and cut the nails on the floor. If you can draw a black print, you can try to brush a small transaction even if the top is installed correctly to see if you can print it correctly.
Needle printing paper installation/replacement:
1 Pull out the print head,
2. Insert the paper head upside down into the upper hole of the printer part.
3. Turn the left wheel of POS counterclockwise (some POS have a paper feed button, just press and hold it), and bring the printing paper through the printer part (position). 4. Pass the printing paper through the paper hole at the bottom of the printer part to ensure that the printing paper can be installed/replaced as soon as it faces the user. As shown in the figure:
Question: How does poss card reader load printing paper? Open the lid, aim at the invoice and put it in.
Question 3: How to install printing paper for UnionPay card reader? You take the POS paper. Look at the left and right sides of POS paper, with circles on the left and boxes on the right. Then, put down the words with the bank information of the acquiring bank, and the box is on the left. The circle is on the right.
Question 4: How to load paper on the card reader? Step diagram of you holding POS paper. Look at the left and right sides of POS paper, with circles on the left and boxes on the right. Then put down the words with the bank information of the acquiring bank, and the box is on the left. The circle is on the right.
Question 5: How to load paper on the credit card machine? Step diagram of you holding POS paper. Look at the left and right sides of POS paper, with circles on the left and boxes on the right. Then put down the words with the bank information of the acquiring bank, and the box is on the left. The circle is on the right.
Question 6: How to load paper into the card reader? Generally, there are two printing methods for credit card readers, one is thermal printing, and the other is needle printing. The two are slightly different.
Installation/replacement of thermal printing paper:
1 Open the paper cover at the top of the machine, put in the paper roll as shown in the figure, and then close the top cover:
2 Tear off the exposed excess paper segments.
Key points:
The paper head extends out from below the groove, and the paper head is pulled out for a while;
After loading the paper, confirm whether it is positive or negative, push the exposed paper section up flat, and cut the nails on the floor. If you can draw a black mark, it means that the installation is correct. You can also try to brush a small transaction and see if it can be printed correctly.
Needle printing paper installation/replacement:
1 Pull out the print head,
2. Insert the paper head upside down into the upper hole of the printer part.
3 Turn the left wheel of POS counterclockwise (some POS have a paper feed button, just press it), and take the printing paper through the printer part (position).
The printing paper passes through the paper hole at the bottom of the printer part, so as to ensure that the printing paper is installed/replaced immediately when there are words facing the user.
Question 7: How to set the card reader to print a little paper after changing paper? When you install an application, the cost of the POS machine varies according to the nature of the enterprise. General education and medical institutions do not charge. The fee is deducted from the customer's credit card. However, some merchants of UnionPay charge relatively high fees, such as catering and entertainment, as follows:
The fixed income of a hotel, restaurant, entertainment, jewelry and handicrafts merchant is 65438+ 0.4% of the transaction amount, 0.2% of the transaction amount of card issuing behavior, and UnionPay network service fee.
2. For general merchants, the fixed income is 0.65438+ 0% of the transaction amount, and the standard UnionPay network service fee is 0.7%.
3, real estate, automobile sales merchants, fixed income and service fees refer to the general way and unified charging standard of UnionPay network enterprise card issuers, but the profit of each card issuer does not exceed 40 yuan, and the highest UnionPay network service fee does not exceed 50,000 yuan; For the wholesale merchants on the right, the fixed income and service fee of UnionPay network are similar to those of the card-issuing banks of ordinary merchants, but the profit of each card-issuing bank does not exceed 16 yuan, and the service fee of UnionPay network does not exceed 2 yuan.
4。 For air ticketing, refueling, supermarkets and other types of enterprises, UnionPay network fixed income and service fees are charged by half compared with ordinary types of enterprises. 0.35% of the transaction amount of the fixed income card issuing behavior, and 0.05% of the transaction amount of the card issuing bank and the standard UnionPay network service fee.
5. For public hospitals and public schools, the issuing bank and UnionPay temporarily participate in the income distribution.
6. At present, the transfer fee and transaction fee are temporarily returned, and the original transaction fee is returned, but it does not include real estate, automobile sales and wholesale and retail transaction types, and the transaction fee is no longer the original return of consumption. The wrong adjustment will refund the original transaction fee (excluding the special long payment of the process).
Question 8: unionpay card reader 1 how to change paper? Open the paper slot cover of POS machine.
2. Put the thermal paper into the paper slot, and pay attention to the paper outlet direction.
3. Test printing the last transaction
========================================================================
All bank cards (credit cards) in China can be swiped, and it is not limited to installing more than one computer in one cabinet to contact my account!
Model: K370 wireless mobile POS, which can be swiped with cell phone signal. (Fixed telephone line model provided)
Rate: 0.5% for the bank, and the highest settlement account is the private account in 50 yuan.
Credit card restriction: all credit cards (except ICBC Easy Loan Card) are supported without restriction, and credit card spending can earn points.
Other remarks: 1, POS machine settlement account, enjoy the national free withdrawal discount;
2. The machine deposit can be fully refunded when the agreement expires.
Question 9: What type of machine is used by the credit card reader to load paper video?
Question 10: How to install the printing paper in the New World Card Reader in Hei Bang 1: Connect the printer to the host computer, check whether the data cable and power cable are connected properly, turn on the printer's power supply, enter the "Printers and Faxes" folder through the host computer's "Control Panel", right-click in the blank, and select the "Add Printer" command to open the wizard window for adding printers. Select "Local printer connected to this computer" and select the "Automatically detect and install plug and play printers" check box.
2. At this point, the host will test the new printer and find the connected printer soon. According to the prompt, put the driver CD that came with the printer into the CD-ROM drive. After installing the printer driver, the printer icon will appear in the Printers and Faxes folder.
You can print a test page, and if you can enter it, it will be connected.