There are many jobs in tooling, such as designers, draftsmen, salesmen and supervisors. Compared with home decoration, it requires higher academic qualifications and of course better treatment. If you do home improvement, you can also be a designer or draftsman. Designers require their own ability to talk about business, which is not very academic. Home improvement is generally based on the basic salary and commission to calculate wages, the basic salary is not high, mainly by commission.
Extended data:
Modeling stage
Preparatory preparation. Before drawing, make sure that the unit used is millimeters, and then use Shift+I to import CAD into 3DMAX. Move the imported CAD drawings to the world coordinates (0,0,0), then select all the imported lines and group them into the basemap, and freeze the basemap. Then call other CAD planes. Turn on 2D snapping, and set the snapping points to be vertical and midpoint, which is convenient for early drawing operation. Overlay the imported layer outlines together, and then move the upper layer along the Y axis in the above figure as a reference.
Similarly, elevation views of buildings are imported, grouped, and their external contours are aligned with out-of-plane contours, and then frozen for reference. Rotate the elevation 90 degrees along the x axis. If you find that the freezing point cannot be captured, be sure to check the capture settings.
Generate entities. With the help of the base map, it is extremely easy to pull the wall on it. At this time, it is important to ensure that the newly built walls are the least and the calculation amount is as little as possible. It is best to recreate the shape of the plane wall with lines, so that the lines drawn are the whole. At this point, pay attention to tick off the tick mark after "StartNewShape" so that the drawn line can be complete. Then, the "Stretch" command is added to the wall line, and the width of the external wall of the building is set to 370mm or 240 mm At the same time, for the sake of face, the window frame of the facade is also treated as a whole. At this time, give a strong body a material.
There are many tiny components in the process of 3D modeling, so we must assign materials to each model after it is built, and it is best to label each material with a name on the material ball. If you need to make further adjustments in the future, you can select a shader, select an object with the same material, and edit the object in a separate window by pressing Alt+W. After the modification is confirmed, the editablemesh command is added to the objects using the same material, and it is folded into the same object, which can minimize the operation of faces and lines and improve efficiency. However, the collapse command is irreversible and must be used with caution.
Camera. After the collapse is completed, the target spotlight can be attached to the object. Press the c key in any window to switch to the camera window. Then adjust the height of the camera and the target point, generally moving in the Y direction in the front view. At this time, in order to facilitate observation, the window layout is generally adjusted. I usually choose ViewportConfiguration/layout to tile left and right, which can ensure that you have the largest window and the most practical operation interface.
Baidu Encyclopedia-3D Modeling