1. Gently move on the angle grinder by hand to remove the skin of the jadeite original stone. Grind it off with grinding heads of various shapes, then peel it and dig it dirty. Replace it with emery grinding head (white, the finest) for fine grinding on the surface of jadeite original stone.

2. First cut the original jade stone with a tool knife, make a general plan for the design of the original stone in advance, and then cut it across the board. It takes a crane to peel the original stone, a crane to peel the big stone, and a small stone can be peeled directly with a bracket or by hand. Skin refers to the non-jadeite skin outside the original stone.

3, peeling, you can use the action of small hands to remove the skin of the original jade stone on the angle grinder. Dig the soil and polish it off with grinding heads of various shapes. For rough machining, replace grinding heads with different marks for rough machining. Fine grinding: Fine grinding the rough jade surface with a diamond head (white and thinnest).

How to grind jadeite?

Before grinding jadeite, it is necessary to wear protective devices such as anti-cutting gloves and goggles, and then put the original stone on the angle grinder. After the skin shell of the jadeite original stone is removed by the action of a small hand, some cortex will still be embedded in the original stone on its surface.

Grind with a grinding wheel. Paste, red cerium oxide, green chromium oxide, coat a layer of grinding paste on the carved jade surface. Grinding, grinding the jade surface repeatedly with a grinding wheel. In order to achieve better results, the procedures of pasting and polishing are generally repeated several times.

Sandpaper: rough grinding, rough grinding is to use sandpaper to polish the jade surface in a large area to remove the relatively large scratches on the jade surface. Cotton thallium: fine grinding, fine grinding is actually the ultimate in rough grinding.

How to polish and smooth the original jadeite stone?

Peeling: you can use an angle grinder to peel off the original jadeite stone, and then use a grinder and a hose to remove all the skins. After some jadeites are peeled, you can see a small amount of impurities embedded in the jade meat, which needs to be ground off with a grinding head.

Wear protective gear when grinding the jadeite stone, and then grind the skin with an angle grinder. The peeled jadeite raw stone should be finely ground with emery grinding head until the surface of the raw stone appears bright, and then polished with oilstone or sandpaper with different labels until the traces on the surface of the jade meat can not be buckled.

After grinding the impurities on the surface of the original stone with various grinding heads, the jadeite original stone is ground with the finest emery grinding head. At this time, we can find that the original jadeite stone has become more and more smooth and shiny. Use oilstone or sandpaper to polish the original jadeite stone until the jade surface can't be touched by hands.

How to polish the original jadeite stone?

Wear protective gear when grinding the jadeite stone, and then grind the skin with an angle grinder. The peeled jadeite raw stone should be finely ground with emery grinding head until the surface of the raw stone appears bright, and then polished with oilstone or sandpaper with different labels until the traces on the surface of the jade meat can not be buckled.

When grinding and polishing jadeite raw stone, it is generally divided into three steps: peeling, coarsening and fine grinding and polishing. The first step is to remove the skin on the original stone surface and a small amount of impurities embedded in jade meat. Then the luster and texture of jade can be seen through rough grinding and fine grinding, and finally the jade is polished.

First, cut the original jade stone with a tool knife, make a general plan for the design of the original stone in advance, and then cut it across the board. Then peel the original stone. For larger stones, you need to use a crane, and for smaller stones, you can peel them directly with brackets or hands. Skin refers to the non-jadeite skin outside the original stone.

Emerald grinding method is divided into six steps, namely peeling, dredging, coarsening, fine grinding, coarse polishing and fine polishing. First, make an overall plan for the processing of jadeite raw stone, then cut the jadeite raw stone and peel it. If the original jadeite stone is relatively large, you need to use lifting equipment, such as a crane.

First, cut the jadeite stone with a knife. Make a general plan for the design of the original stone first, and then make a one-size-fits-all plan. Then peel the original stone, the big stone needs a crane, and the small stone can be peeled directly with a bracket or by hand. The surface layer refers to the original stone surface layer that is not the jade surface layer.

How to polish the original jadeite stone by hand?

The process of grinding jadeite raw stone needs patience, and tools and techniques need to be prepared. First, cut the original jade stone with a tool knife, make a general plan for the design of the original stone in advance, and then cut it across the board.

Emerald grinding method is divided into six steps, namely peeling, dredging, coarsening, fine grinding, coarse polishing and fine polishing. First, make an overall plan for the processing of jadeite raw stone, then cut the jadeite raw stone and peel it. If the original jadeite stone is relatively large, you need to use lifting equipment, such as a crane.

Before grinding jadeite, it is necessary to wear protective devices such as anti-cutting gloves and goggles, and then put the original stone on the angle grinder. After the skin shell of the jadeite original stone is removed by the action of a small hand, some cortex will still be embedded in the original stone on its surface.

Wear protective gear when grinding the jadeite stone, and then grind the skin with an angle grinder. The peeled jadeite raw stone should be finely ground with emery grinding head until the surface of the raw stone appears bright, and then polished with oilstone or sandpaper with different labels until the traces on the surface of the jade meat can not be buckled.

The first step of grinding the original stone: peeling The so-called peeling refers to removing the skin of the original jade stone with small hands on the angle grinder. At this time, there will be several deep marks similar to gullies on the rough stone surface.

How to polish jadeite original stone with grindstone?

The process of grinding jadeite raw stone needs patience, and tools and techniques need to be prepared. First, cut the original jade stone with a tool knife, make a general plan for the design of the original stone in advance, and then cut it across the board.

Before grinding jadeite, it is necessary to wear protective devices such as anti-cutting gloves and goggles, and then put the original stone on the angle grinder. After the skin shell of the jadeite original stone is removed by the action of a small hand, some cortex will still be embedded in the original stone on its surface.

Wear protective gear when grinding the jadeite stone, and then grind the skin with an angle grinder. The peeled jadeite raw stone should be finely ground with emery grinding head until the surface of the raw stone appears bright, and then polished with oilstone or sandpaper with different labels until the traces on the surface of the jade meat can not be buckled.

First, cut the jadeite stone with a knife. Make a general plan for the design of the original stone first, and then make a one-size-fits-all plan. Then peel the original stone, the big stone needs a crane, and the small stone can be peeled directly with a bracket or by hand. The surface layer refers to the original stone surface layer that is not the jade surface layer.

Remove the skin of jadeite original stone by tiny hand movements on the angle grinder. Grind it off with grinding heads of various shapes, then peel it and dig it dirty. Replace it with emery grinding head (white, the finest) for fine grinding on the surface of jadeite original stone.